What is the ground clearance of the Emgrand S?

1 Answers
StNoah
07/30/25 2:00am
The minimum ground clearance of the Emgrand S is 193mm. The minimum ground clearance of the Emgrand S refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Emgrand S, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Emgrand S is a compact SUV under Geely Auto. The dimensions of the Emgrand S are 4430mm in length, 1833mm in width, and 1573mm in height, with a wheelbase of 2700mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while that of SUVs ranges between 200mm and 250mm. However, the ground clearance of the Emgrand S is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Emgrand S's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle is frequently used in remote areas or on poor road conditions, a higher ground clearance may be preferred to avoid underbody scrapes or damage, considering the vehicle's off-road performance.
Was this review help?
6
4
Share
More Forum Discussions

Does the ETC card have a specific orientation for insertion?

ETC card insertion does have a specific orientation. The method for inserting the ETC card is as follows: 1. The ETC sensor is usually installed inside the vehicle, on the front windshield; 2. The base is attached to the front windshield with a small round plastic suction cup; 3. The Express Card contains a chip, which is linked to a bank card, and can also be topped up with money; 4. Take out the Express Card and gently insert the side with the chip facing up into the ETC sensor. ETC is an Electronic Toll Collection system, and the ETC lane is dedicated to vehicles equipped with an ETC onboard unit, using electronic toll collection. The ETC non-stop toll collection system is currently the most advanced bridge and road toll collection method in the world.
13
2
Share

Can ETC be transferred to another vehicle when changing cars?

ETC cannot be used if the vehicle information it is bound to does not match. Different vehicle types have different highway toll fees. According to the "Rules for the Use of the Non-Stop Fast Pass System," when applying for ETC, the ETC card and OBU device are already bound to the vehicle, and the relevant vehicle information has been imported to form a one-to-one correspondence. If you change to a new car with a new license plate, you need to cancel the original ETC and reapply for the new car. If it's a new car with an old license plate, you can simply update the vehicle information at an offline service center. ETC is an electronic toll collection system that allows vehicles equipped with ETC devices to pass through designated ETC lanes without stopping. The electronic toll collection system is an automated toll system for highways or bridges. ETC charging principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to settle transactions with banks. This achieves the goal of vehicles not needing to stop at toll booths to pay road or bridge fees, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping. Reduce wear and tear: Saves costs by minimizing vehicle acceleration and braking frequency, thereby reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improve efficiency: ETC lanes can theoretically increase throughput by 2-3 times, making traditional ETC faster, more advanced, and more efficient. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation cards will be widely used in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate for passenger vehicles on roads should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will focus on promoting ETC for trucks and exploring deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of more than 10 meters to prevent accidental toll payment for the vehicle ahead due to ETC device failure or absence. The recognition speed for ETC lanes is 20 km/h. Driving too fast may result in failure to read vehicle device information and toll deduction failure. Unauthorized removal or movement of the OBU device, or detachment/loosening of the ETC electronic tag, will render the tag invalid. It can be sent to the bank where the ETC card was issued or a highway service center for inspection. If the detachment is not due to human error, reactivation is sufficient. When using a debit card linked to ETC, insufficient balance may cause toll deduction failure. Follow the guidance of on-site staff to use manual MTC lanes and pay via cash or card. Thick windshields may cause poor signal reception. This is especially important for vehicles that have had windshield replacements after accidents or for those with modified windshields.
11
2
Share

What is Proper Wheel Alignment?

Wheel alignment serves the following purposes: 1. Helps the vehicle maintain stable straight-line driving. 2. Makes steering easier and reduces wear on tires and steering components during driving. 3. Enhances driving comfort. 4. Reduces fuel consumption. 5. Extends tire lifespan and ensures straight-line stability of the vehicle. 6. Minimizes wear on chassis suspension components and improves driving safety. Situations that require wheel alignment include: 1. Damage to the chassis and suspension caused by an accident. 2. Replacement of the steering system or its components. 3. Uneven wear on the inner or outer edges of the front or rear tires. 4. Replacement or adjustment of the suspension system. 5. The vehicle pulling to the left or right when driving straight.
5
1
Share

What is the maximum speed limit on Chinese highways?

China's highway maximum speed limit: 1. 120 kilometers per hour. 2. According to the "Road Traffic Safety Law": Article 78 Highways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On highways, the maximum speed for small passenger vehicles shall not exceed 120 kilometers per hour, other motor vehicles shall not exceed 100 kilometers per hour, and motorcycles shall not exceed 80 kilometers per hour. 3. For two lanes in the same direction, the minimum speed of the left lane is 100 kilometers per hour. For three or more lanes in the same direction, the minimum speed of the leftmost lane is 110 kilometers per hour, the middle lane is 90 kilometers per hour, and the rightmost lane is 60 kilometers per hour. 4. If the speed indicated by road speed limit signs is inconsistent with the above lane speed regulations, drive according to the speed indicated by the road speed limit signs.
3
5
Share

How to Fix Wiper Blade Chattering?

The solutions for wiper blade chattering are as follows: 1. Replace with new wiper blades. 2. Lift the wiper arm, remove the blade, and adjust the angle between the arm and windshield until it fits snugly against the glass. 3. Have the motor inspected at a repair shop. Wiper blades, also known as windshield wipers, are blade structures installed in front of the windshield. Their purpose is to remove rain, snow, and dust from the vehicle's windshield, improving driver visibility and enhancing driving safety. The reasons for wiper blade chattering include: 1. Aging or hardening of the wiper blade. 2. Misalignment of the wiper arm. 3. Insufficient motor power.
5
3
Share

Why is the central control screen not lighting up?

Inspection process for a non-lighting central control screen: 1. If the central control screen is black and not lighting up, you can first try restarting the screen by turning the ignition on and off. If this doesn't resolve the issue, it is likely due to poor contact in the wiring. It is necessary to promptly check whether there are any loose connections in the wiring. If there are, this will naturally cause the central control screen not to light up. In this case, simply reconnecting the loose parts properly should solve the problem. Of course, it could also be due to aging of the power signal cable. You can try replacing it with a new one. If the black screen issue is resolved, it confirms that the problem was indeed with the power signal cable. 2. If after checking the above two scenarios the central control screen still remains black, it is probably because the screen has been used for too long, leading to a malfunction in the power supply module. This not only causes lag but, in severe cases, results in a black screen. It could also be due to defects in the circuit design. However, issues like module abnormalities and design defects are beyond the scope of DIY fixes and require inspection, repair, or replacement at a professional repair shop.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.