What is the ground clearance of the CX-30?

2 Answers
Valentina
07/28/25 8:09pm
Mazda CX-30's officially announced minimum ground clearance is 175mm. Relevant information is as follows: Concept: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. When the vehicle is fully loaded, it represents the distance between the lowest point of the vehicle (excluding wheels) and the road surface, indicating the vehicle's ability to overcome obstacles. Principle: The smaller the ground clearance, the worse the ability to overcome obstacles. Passenger cars generally travel on flat urban roads, so they have smaller ground clearance. Off-road vehicles have larger minimum ground clearance to pass over larger obstacles. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstructed terrain, but the higher the center of gravity, which reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability.
Was this review help?
2
3
Share
Vieira
08/12/25 12:58am
I know the ground clearance of the Mazda CX-30 is approximately 175 millimeters, which converts to 17.5 centimeters. This measurement refers to the height from the lowest point of the vehicle's chassis to the ground. It feels quite smooth driving on city roads, and I don't have to worry too much about scraping the undercarriage when encountering speed bumps or small potholes. However, I think this height isn't particularly high—for example, when driving in mountainous areas or snowy sections, I need to be more cautious and avoid going too fast to prevent excessive jolting. Additionally, the CX-30's design leans toward comfort and on-road performance, so its moderate ground clearance also helps improve handling stability, unlike some off-road SUVs with higher ground clearance that might feel less stable. If you frequently drive on complex terrain, I recommend test-driving more vehicles to see how the suspension system affects passability. Of course, this value can be influenced by tire pressure and load—I've noticed the clearance decreases by a few millimeters when the car is fully loaded with luggage, so remember to check tire pressure and shock absorber condition during regular maintenance.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Does the Haval H6 come with built-in WiFi?

The luxury models of the Haval H6 come with built-in WiFi. You can find the WiFi function in the vehicle's multimedia settings and turn it on, then enable your phone's hotspot to connect. Enhancing travel enjoyment: In-car WiFi is a specialized internet device introduced for vehicles. It allows passengers to access the internal LAN of the car, read e-books, browse near real-time news, and enjoy music and videos. Eliminating the hassle of installing in-car WiFi: Vehicles without built-in WiFi require purchasing a router from a quick repair shop and obtaining a network card, followed by setup according to the manual. This process typically takes about a day. Vehicles with built-in WiFi eliminate these installation hassles.
17
0
Share

What is the displacement of Formula racing cars?

Formula racing car engines have a displacement of 3000cc with 8 cylinders, currently not exceeding 2.4 liters. F1 Formula racing car related content: Every F1 Formula racing car on the track is equipped with a super engine. Currently, the FIA has set the maximum engine displacement for F1 racing cars at 3000cc, so each team sets their racing car engine displacement at 3000cc. An F1 racing car engine has approximately 900 moving parts, with a maximum speed that can exceed 19,000 rpm, while ordinary car engines typically do not exceed 8,000 rpm. Engine specifications: Only 4-stroke reciprocating piston engines can be used. According to regulations, the engine displacement must not exceed 2400cc. Supercharging is prohibited. All engines must have 8 cylinders arranged in a 90-degree V-angle, and the standard section of each cylinder must be circular. Each cylinder of the engine must have two intake and two exhaust valves.
10
0
Share

Is a Stacker Considered Special Equipment?

Stacker is considered special equipment. Introduction to Stackers: A stacker refers to various wheeled handling vehicles used for loading, unloading, stacking, and short-distance transportation of palletized goods. Choosing an Electric Stacker: The load capacity of stackers generally includes 1 ton, 1.5 tons, 2 tons, etc., with the national standard maximum being 2 tons. The important parameters of a stacker are only the motor and the mast. The lifting height is a crucial parameter of a stacker, with the national standard maximum generally being 6.5 meters, the minimum height being 1.6 meters, and the commonly used height in warehouses being 4.5 meters. Additionally, the battery is also an important component of a stacker, typically providing 8-12 hours of working time.
7
3
Share

Is It Correct to Shift to P Gear After Turning Off the Engine?

Shifting to P gear after turning off the engine is correct. The proper method for parking an automatic transmission vehicle is: 1. Press the brake pedal to slow down and come to a complete stop; 2. After stopping, shift into N gear; 3. Engage the handbrake; 4. Release the foot brake and ensure the vehicle is stationary; 5. Press the foot brake again and shift into P gear; 6. Turn off the engine. The correct method for starting an automatic transmission vehicle is: 1. Connect the power supply, then start the car; 2. After ignition, press the brake pedal, shift into D gear, release the handbrake, and gently press the accelerator to start; 3. After starting, appropriately press the accelerator according to road conditions to increase speed. An automatic transmission vehicle does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
2
4
Share

Can You Find the Owner's Phone Number Through 114?

You cannot directly obtain the owner's phone number through 114, but you can indirectly communicate with them via phone. The staff will assist in contacting the corresponding vehicle owner but will not disclose the phone number to others. Below is detailed information about 114 services: 1. Overview: 114 provides number information services to users. Traditional services include priority number announcement, voice number announcement, brand inquiry, inquiry transfer, temporary number announcement, enterprise naming, directory inquiry, sorted number announcement, and media extension. Value-added services include 118114 legal consultation, education navigation, health consultation, discount services, chat services, and employment consultation. 2. Vehicle Moving Service: The 114 inquiry platform has launched a 'vehicle moving' phone service. When your vehicle is blocked, simply call 114, provide the license plate number, and you can quickly contact the owner to move the vehicle promptly.
19
1
Share

How Many Kilometers Should the Timing Chain of the Tiguan Be Replaced?

The timing chain of the Tiguan should be replaced every 150,000 to 200,000 kilometers. During this period, owners should have it inspected at a professional repair shop. If the timing chain is severely worn or if there are other engine issues, timely repair or replacement is necessary. The timing chain drive method is reliable, durable, and space-saving. Its main function is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. Signs of timing chain failure include unusual engine noises, difficulty starting, increased fuel consumption, increased oil consumption, severe exhaust emissions, sluggish acceleration, the engine's yellow warning light, and insufficient power, among other issues. Methods for inspecting the timing chain: Check the timing chain for elongation, wear, or breakage. If there is minor damage, replace it immediately. Use a spring scale to measure the elongation at three or more points. If it exceeds the specified length, replace it promptly.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.