What is the ground clearance of the CRV?

1 Answers
LaJason
07/30/25 10:57am
CRV classic model has a minimum ground clearance of 135MM, while mid-to-high-end models have a minimum ground clearance of 137MM. The following is relevant information: 1. Ground clearance refers to the distance between the ground and the rigid object at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. Ground clearance is divided into unloaded and loaded conditions. The ground clearance when loaded is also called the minimum ground clearance, which refers to the shortest distance between the lowest protruding part of the vehicle's chassis and the ground when the vehicle is parked horizontally under the rated full load condition. 2. Ground clearance is related to the vehicle's load. The heavier the load, the smaller the ground clearance. Vehicles with low ground clearance have a lower center of gravity but poor passability. Vehicles with high ground clearance have good passability. In addition to performing well on gravel and mountain roads, high ground clearance can also prevent water from entering the exhaust pipe when driving through flooded roads and make it easier to park on curbs or other parking spaces with height differences.
Was this review help?
8
4
Share
More Forum Discussions

How to turn on the heater in NIO ES6?

Method to turn on the heater in NIO ES6: First start the engine for preheating, wait until the engine temperature pointer reaches the middle position, then turn on the heating air conditioning. At the same time, set the air circulation to external circulation to expel the cold air inside the car. After waiting for 2 to 3 minutes, set the air circulation to internal circulation. The car's heating system can heat the air inside the car or the air drawn from outside into the car, thereby increasing the interior temperature. There are many types of car heating systems, which can be divided into hot water heating systems, gas heating systems, and exhaust heating systems based on different heat sources. Currently, small cars mainly use hot water heating systems, while large vehicles mainly use gas heating systems. In terms of body dimensions, the car has a length, width, and height of 4850mm, 1965mm, and 1758mm respectively, with a wheelbase of 2900mm.
14
0
Share

What are the differences between the WM EX5 and the Velite 7?

The differences between the WM EX5 and the Velite 7 are as follows: 1. Price: The official price of the top-end version of the WM EX5 is cheaper than that of the Velite 7. 2. Overall body: The body of the top-end version of the WM EX5 is longer than that of the Velite 7, and the wheelbase of the WM EX5 top-end version is also longer than that of the Velite 7. Below is a detailed comparison: 1. Basic information comparison: The WM EX5 is a compact SUV under WM Motor, with the latest top-end model being the 2021 EX5-Z Fun Dynamic Edition; the Velite 7 is a small SUV under Buick, with the latest top-end model being the 2020 652E Connected Smart Edition. In terms of price, the official price of the top-end version of the WM EX5 is cheaper than that of the Velite 7. 2. Body data comparison: The latest top-end version of the WM EX5 has a body length, width, and height of 4585(mm) x 1835(mm) x 1672(mm), with a wheelbase of 2703(mm), while the latest top-end version of the Velite 7 has a body length, width, and height of 4264(mm) x 1767(mm) x 1618(mm), with a wheelbase of 2675(mm). In terms of overall body, the body of the top-end version of the WM EX5 is longer than that of the Velite 7, and the wheelbase of the WM EX5 top-end version is also longer than that of the Velite 7. 3. Power comparison: The latest version of the WM EX5 has a maximum horsepower of 218Ps, maximum power of 160kW, and maximum torque of 225N·m; the latest version of the Velite 7 has a maximum horsepower of 177Ps, maximum power of 130kW, and maximum torque of 360N·m.
15
1
Share

What does it mean when it says 'Abnormal oil pressure, please turn off the engine'?

Abnormal oil pressure prompting engine shutdown is typically caused by an oil filter check valve issue. If the oil filter is ruled out, there's likely a check valve beneath the oil filter that needs replacement. Below is relevant information about oil pressure regulators: 1. Definition: The oil pressure regulator is essentially a diaphragm-controlled overflow valve. The diaphragm divides the regulator into an upper spring chamber and a lower fuel chamber. It controls the opening of the overflow valve to maintain pressure balance between the two chambers. 2. Working principle: When fuel chamber pressure exceeds the combined force of spring pressure and vacuum pressure, the diaphragm arches upward, opening the regulator valve. Some fuel then returns to the tank through the return port via the ball valve, reducing pressure. When pressure drops to the regulator's set control pressure, the ball valve closes to maintain proper pressure in the fuel line between the pump check valve and pressure regulator.
17
4
Share

What is the fuel tank capacity of the Oshan X5 in liters?

The fuel tank capacity of the Changan Oshan X5 is 53 liters, as officially announced. Owners who have purchased the Changan Oshan X5 can also check this information on the vehicle's configuration sheet. The Changan Oshan X5 requires 92-octane fuel, with a fuel consumption of 6.0 to 6.3L per 100 kilometers. A full tank can cover a distance of approximately 841 to 883 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, with additional space left between the safe fill level and the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
7
4
Share

What are the differences between the Haval Chitu and First Love?

Haval Chitu and First Love have the following differences: 1. Body dimensions: The Haval Chitu measures 4470/1898/1625mm in length, width, and height, with a wheelbase of 2700mm. Its dimensions are roughly equivalent to the Haval First Love, positioning it as an entry-level compact SUV. The First Love measures 4472/1841/1619mm in length, width, and height, with a wheelbase of 2700mm, positioning it as a compact SUV. 2. Powertrain: The Haval Chitu is equipped with a 1.5T engine, available in high and low power tuning versions, with maximum power outputs of 184 horsepower and 150 horsepower respectively. It is paired with a 7-speed wet dual-clutch transmission. The Haval First Love is equipped with a 1.5T engine, with a maximum output power of 110kW (150 horsepower). It is paired with a 7-speed dual-clutch transmission.
17
2
Share

What are the precautions when turning a car?

When turning a car, the steering wheel should be operated in accordance with the curvature of the road and coordinated with the driving speed to ensure appropriate steering angle, proper timing for turning, and timely correction of direction. It is strictly forbidden to take both hands off the steering wheel to prevent dangerous deviations in direction. More detailed information is as follows: 1. Slow down when turning: Avoid turning the steering wheel too sharply to prevent excessive centrifugal force causing the car to skid. If the car skids, immediately release the accelerator pedal and turn the steering wheel toward the side where the rear wheels are skidding. Once the vehicle resumes straight driving, correct the steering wheel and continue driving. 2. Avoid using the brakes: When turning, try to avoid using the brakes, especially emergency braking, to prevent skidding or accidents. 3. When making left or right turns at intersections, the driver must use turn signals: a) Left turn: In addition to signaling and changing lanes in advance, try to stay close to the center of the road while waiting to turn to facilitate the passage of vehicles behind. b) Right turn: In addition to merging into the outer lane in advance, use the right turn signal to alert pedestrians on the roadside. Reduce speed when turning right and be mindful of the impact of the inner wheel difference to avoid scraping pedestrians.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.