What is the ground clearance of the Cruze?

3 Answers
VonZoey
07/28/25 6:40am
The ground clearance of the Cruze is 130 millimeters. The minimum ground clearance of the Cruze refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Cruze, the better its passability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Chevrolet Cruze is a next-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. The Cruze has a length of 4666mm, a width of 1807mm, a height of 1460mm, and a wheelbase of 2700mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Cruze is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Cruze's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.
Was this review help?
17
4
Share
Bryce
08/11/25 2:36pm
I've been driving a Cruze for several years, and the ground clearance is about 160 millimeters. This height is quite comfortable for city driving, and it doesn't scrape the chassis when going over speed bumps. However, you need to be careful when driving on rural or mountain roads, especially when rainwater flows near the wheels, as the body tends to get muddy. Once, when I went to visit a friend in the countryside, I had to drive slowly on rough roads to avoid bottoming out. Generally, the ground clearance of sedans ranges from 150 to 180 millimeters, and the Cruze falls in the middle, which is sufficient for daily family use. If you frequently go off-road or carry a lot of luggage, the clearance might feel inadequate, and an SUV would be a better choice. It's important to regularly check the tires and chassis to prevent dirt buildup and rust from affecting the car's lifespan. Overall, the Cruze performs well on regular roads.
Was this review help?
20
2
Share
Expand All
RhettFitz
09/27/25 8:26am
The ground clearance of the Cruze typically ranges from 150 to 160 millimeters, depending on the model and year. The clearance height is measured from the ground to the lowest point under the car, such as the engine underguard or the exhaust pipe position. Heavier vehicles tend to have slightly reduced clearance, so when loaded, it may drop to around 150 millimeters. Tire size and suspension system can affect this measurement—installing larger wheels may slightly decrease the clearance. For a quick check, you can measure the chassis height with simple tools. Compared to other cars, like the Honda Civic with 165 millimeters, the difference is minimal. Vehicle design balances aerodynamics and off-road capability—excessive height can lead to instability, while insufficient clearance increases the risk of scraping. It's advisable to have a technician confirm the height during maintenance to prevent potential issues, which benefits overall vehicle health.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What Does the Secondary Maintenance Include?

Automobile secondary maintenance aims to focus on inspection and adjustment. Here is a detailed introduction to secondary maintenance: 1. Main contents of secondary maintenance: Measure the cylinder pressure of the engine, adjust the valve clearance, clean various filters, the oil pan, the float assembly of the oil strainer, inspect and adjust the wear and clearance of the connecting rod bearings, check and tighten the front and rear engine mounting bolts, inspect and adjust the brakes, perform tire rotation, and check the clutch and adjustments of other assemblies. 2. Secondary maintenance is performed when the vehicle has traveled 6,000~8,000 km: Secondary maintenance involves a more in-depth technical condition inspection and adjustment for vehicles that have traveled a certain mileage, mainly to ensure that the vehicle maintains good operational performance for a longer period in the future. 3. Secondary maintenance involves more tasks: In addition to all the tasks of primary maintenance, secondary maintenance must also eliminate any faults and hidden dangers discovered during the maintenance process. The maintenance takes a longer time and is usually performed by maintenance workers. Before secondary maintenance, the driver should provide the maintenance workers with any poor technical conditions encountered during the vehicle's operation to improve the quality of maintenance.
18
2
Share

What is the warranty period for the Magotan's transmission?

The warranty period for the Magotan's transmission is 3 years or 60,000 kilometers, whichever comes first. Below are the details regarding the Magotan's transmission warranty: 1. The warranty has two conditions: one is the time limit, which is 3 years, and the other is the mileage limit, which is 60,000 kilometers. 2. During the warranty period, not all repair costs for the vehicle will be covered. 3. The free items specified by the manufacturer during the warranty period are usually detailed in the owner's manual and the after-sales service department of the car's 4S stores. The specific details depend on the vehicle purchase date.
7
1
Share

What class of car is the Mazda3?

The Mazda3 is a compact sedan launched by Mazda Motors. Here are some relevant details about the Mazda3: 1. This car is a relatively classic sedan under the Mazda brand. After entering the Chinese market, it attracted a large number of young consumers with its refined appearance. 2. In terms of exterior design, this model is largely consistent with the overseas version, retaining Mazda's signature KODO design philosophy. 3. The front fascia features a new black hollowed-out shield-shaped grille, and the headlights on both sides have become sharper, enhancing the car's sporty appeal. 4. The side profile of the car hasn't changed significantly, with only minor adjustments in some details. Notably, the previous hatchback version has been discontinued, and only the sedan version is now available. 5. In terms of powertrain, the car offers two engine options: a 1.5L and a 2.0L naturally aspirated engine. The 1.5L engine delivers a maximum power of 86kW and a maximum torque of 148Nm, while the 2.0L engine produces a maximum power of 116kW and a maximum torque of 202Nm.
18
4
Share

Where is the oil filter located on the Peugeot 3008?

The oil filter of the Peugeot 3008 is located at the lower front of the engine block. Here are the specific details about the oil filter: 1. The oil filter, also known as the oil cleaner, functions to filter out impurities, gums, and moisture from the oil, delivering clean oil to various lubrication points. 2. To reduce friction between moving parts in the engine and minimize component wear, oil is continuously supplied to the friction surfaces of moving parts, forming a lubricating oil film. Oil inherently contains a certain amount of gums, impurities, moisture, and additives. During engine operation, the introduction of metal particles, airborne contaminants, and the generation of oil oxidation products gradually increase the impurities in the oil. If the oil is not filtered and directly enters the lubrication circuit, the impurities in the oil will be carried to the friction surfaces of moving parts, accelerating component wear and reducing the engine's service life.
19
5
Share

How to Replace the Battery in a Hyundai Mistra Key?

The method to replace the battery in a Hyundai Mistra key is as follows: 1. First, use a screwdriver to remove the key fob cover; 2. Gently remove the key blade; 3. Insert the screwdriver into the hole indicated by arrow 1 and turn it clockwise as shown in the diagram to completely separate the two parts of the key fob; 4. After opening, remove the battery and detach the circuit board; 5. Finally, replace it with a new battery and reassemble by following the reverse order of the disassembly steps. Additional information: 1. The Mistra EV is positioned as a "Smart Vehicle for Superior Living," designed for "creators of superior living" who prioritize family, have a pleasant and profound personality, and focus on vehicle quality and technology. 2. The Mistra EV is equipped with a globally standardized three-electric system and kinetic energy recovery system, achieving a range of 520 km under NEDC conditions. It also offers a spacious and comfortable interior that surpasses its class, along with cutting-edge intelligent connectivity and safety features, providing users with a higher-quality new energy travel experience.
18
3
Share

Where is the windshield washer switch located?

The windshield washer switch is located on the wiper control lever on the right side of the steering wheel. To use the washer function, pull the wiper control lever towards the driver. If you frequently use the wipers, make sure to check the windshield washer fluid level. If the fluid level is too low, replenish it promptly to avoid dry wiping, which can damage the wipers. Wipers are essential components in a car, also known as windshield wipers or windscreen wipers. They help clear rain, snow, hail, and dust from the windshield, ensuring clear visibility for safe driving. In rainy conditions, when raindrops obscure the windshield, turning on the wipers quickly restores a clear view of the road, vehicles, pedestrians, and surroundings. Hatchbacks and SUVs often have rear window wipers as well. Besides cars, other vehicles like trains and trams are also equipped with wipers. How wipers work: The wiper motor is typically integrated with a worm gear mechanism. The worm gear reduces speed and increases torque, and its output shaft drives a four-bar linkage that converts continuous rotation into a back-and-forth wiping motion. Wiper usage tips: Never forcibly remove frozen wipers or pour hot water on them, as this can tear the wiper blades or crack the windshield. Instead, start the vehicle, turn on the heater, and direct warm air toward the windshield to thaw the wipers. In winter, always use antifreeze windshield washer fluid. Choose a product rated for your region's lowest temperatures—for example, in northern areas, opt for a heavy-duty antifreeze fluid that remains liquid at -40°C.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.