What is the ground clearance of the Chery Tiggo 5x?

3 Answers
McSarah
07/29/25 11:05pm
Tiggo 5x has a ground clearance of 19 cm, featuring a MacPherson independent front suspension and a double-wishbone independent rear suspension. Definition of ground clearance: Ground clearance (or minimum ground clearance) refers to the distance between the lowest protruding part of the vehicle's chassis and the level ground when the vehicle is fully loaded. Impact of ground clearance: The minimum ground clearance reflects a car's ability to pass over obstacles or uneven surfaces without collision. Generally, the minimum ground clearance for family cars ranges between 110 mm and 150 mm. A lower ground clearance (usually below 11 cm) provides better high-speed stability but poorer off-road capability.
Was this review help?
12
2
Share
LeJayce
08/16/25 1:06am
As someone who frequently helps friends choose cars, I've noticed that the Chery Tiggo 5x has a ground clearance of 186mm, which falls within a practical range for SUVs. Having driven this car on mountain roads and city streets, the 186mm height means the body is nearly 19cm off the ground, allowing it to easily pass over speed bumps, small potholes, or rain puddles without scraping the undercarriage. Compared to some sedans with 150mm clearance, it's better suited for suburban or rural roads, as its design takes into account China's diverse road conditions. If you're planning long-distance road trips or family outings, this height ensures both comfort and improved off-road capability. The height may slightly decrease as tires wear down, so regular tire maintenance is essential. From a driving experience perspective, the suspension is moderately tuned, offering a balance between softness and firmness, with agile steering that doesn’t compromise stability. Overall, as an economical SUV, this parameter strikes a well-balanced performance in its class.
Was this review help?
9
1
Share
Expand All
LaJeremiah
10/18/25 6:45am
During my test drive of the Chery Tiggo 5x, its 186mm ground clearance left a deep impression on me, especially since I often deal with city traffic jams and rough roads. This height gives more confidence while driving, reducing worries when encountering curbs or temporary construction zones. With approximately 18.6cm of ground clearance, it's significantly higher than regular sedans, making it capable of handling flooded roads during rain. From a practical perspective, this design optimizes daily commuting by balancing fuel efficiency and off-road capability. I've driven similarly sized models like the Haval H2, which has slightly less ground clearance (around 170mm), resulting in more noticeable bumps. In contrast, the Tiggo 5x's suspension rebounds quickly, minimizes body roll during turns, and suits beginners or family users. If cost-effectiveness matters to you, the 186mm clearance paired with solid underbody protection reduces repair risks, making it a smart long-term choice.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What is the valve adjustment method for the 430 Weichai P12?

430 Weichai P12 valve adjustment method: 1. Turn the engine to the compression top dead center of cylinder 1 (align with the OT mark, intake valve of cylinder 6 opens), adjust the intake valve clearance of cylinders 1, 2, and 4 to 0.4mm. 2. At the flywheel end, turn the engine counterclockwise to align with the "16" mark on the outer edge of the flywheel. First adjust the exhaust valve clearance of cylinder 1 to 0.5mm, then adjust the brake clearance of cylinder 1 to 1.35mm. 3. Continue turning the engine counterclockwise at the flywheel end to align with the "25" mark on the outer edge of the flywheel. First adjust the exhaust valve clearance of cylinder 5 to 0.5mm, then adjust the brake clearance of cylinder 5 to 1.35mm.
1
5
Share

Is the Qashqai a three-cylinder or four-cylinder?

The Qashqai is a four-cylinder vehicle. Relevant details are as follows: 1. Exterior Design: The new Qashqai's exterior design is bolder and sharper compared to the new X-Trail, retaining the 'V' shaped front grille, a signature design language of Nissan, paired with sharp headlight clusters, leaving a lasting impression. The side profile of the new Qashqai is not overly adorned with lines but adopts the conventional rounded styling of urban SUVs, with a pronounced three-dimensional effect at the rear, though the overall aesthetic is somewhat understated compared to the striking front face. 2. Interior: Inside, the new Qashqai's cockpit resembles that of the new X-Trail, featuring a floating large-size display, a full LCD instrument panel, a three-spoke multifunction steering wheel, and an electronic gear shift, among other elements, with technological features and a sense of premium quality surpassing the current model. There are also corresponding upgrades in power. According to overseas market information, the new car will be equipped with a 1.3T four-cylinder engine, paired with a 12V mild hybrid system, with a maximum output of 138 horsepower for the manual transmission version and 156 horsepower for the CVT version.
20
5
Share

When to Replace Transmission Fluid?

The transmission fluid in a car should be replaced every two years or every 40,000 kilometers, with the specific interval depending on the vehicle model. The hazards of not replacing transmission fluid in time: 1. Deterioration of transmission: Prolonged operation under high-speed and high-temperature conditions can cause the transmission to deteriorate. A deteriorated transmission will accelerate the wear of mechanical components, and severe deterioration may even damage internal transmission parts. 2. Weak vehicle acceleration: If the transmission fluid is not replaced for a long time, the vehicle may experience weak acceleration when starting, along with slight slipping during driving. 3. Increased transmission wear rate: If the transmission fluid is not replaced for an extended period, it will become thicker, obstructing the transmission cooler. This obstruction leads to rising transmission temperatures, which in turn accelerates the wear rate.
9
0
Share

How to Deal with Severe Low-Frequency Noise After Soundproofing?

Severe low-frequency noise after soundproofing is likely due to the use of incorrect soundproofing materials. It is recommended to use white sound-absorbing cotton (white cotton, Shirley cotton, ultra-fine fiber cotton), which can effectively absorb low-frequency noise waves generated externally or internally. Relevant details are as follows: 1. Avoid full coverage: If vibration damping sheets are chosen as the soundproofing material, do not opt for full coverage. While full coverage of vibration damping sheets can eliminate high-frequency noise during driving, the main noise inside the car is low-frequency noise. Therefore, using full coverage vibration damping sheets will not significantly reduce noise. 2. Counterproductive: Do not assume that more soundproofing projects will yield better results. If vibration damping sheets are applied along with additional sound-absorbing layers like white cotton, it may have the opposite effect, leading to noticeable low-frequency noise and even symptoms like dizziness and tinnitus.
7
0
Share

What is DSG Transmission Death Flashing?

DSG transmission death flashing refers to a malfunction in the DSG transmission where the gear indicator continuously flashes, gears cannot be used normally, shifting becomes difficult, and the transmission temperature rises rapidly. DSG Introduction: DSG refers to the transmission model used by Volkswagen. DSG (Direct-Shift-Gearbox) translates to 'Direct Shift Gearbox' in Chinese. Unlike conventional semi-automatic transmission systems, DSG is based on a manual transmission rather than an automatic transmission, making it a member of the AMT (Automated Manual Transmission) family.
12
5
Share

What are the causes of friction noise when turning the steering wheel of an Audi Q5?

Here are the reasons for the friction noise when turning the steering wheel of an Audi Q5: 1. Lack of oil in the shock absorber's plain bearing: Listen near the hood to determine if the noise is coming from the top mount of the shock absorber. If the noise is from the plain bearing of the shock absorber, applying some grease to the plain bearing may help. If the noise persists after greasing, replacement is necessary. 2. Loose stabilizer bar bushings: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.