What is the ground clearance of the Cayenne?

1 Answers
VonCatherine
07/24/25 9:31pm
The ground clearance of the 2022 Porsche Cayenne is 175 millimeters. The ground clearance of the 2022 Cayenne refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the 2022 Cayenne improves off-road capability, but if the ground clearance is too high, the stability at high speeds will decrease. The Porsche Cayenne, known internationally as Porsche Cayenne, is an SUV model. The dimensions of the 2022 Cayenne are 4846 mm in length, 1939 mm in width, 1705 mm in height, with a wheelbase of 2895 mm. Generally, the ground clearance for sedans ranges between 110 mm and 150 mm, while SUVs typically have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2022 Cayenne is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 2022 Cayenne. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferred to avoid scraping or damaging the undercarriage, considering the vehicle's off-road performance.
Was this review help?
8
4
Share
More Forum Discussions

Should I Change to Antifreeze Engine Oil in Winter?

Winter does not require changing to antifreeze engine oil. Engine oil: As the lifeblood of the engine, engine oil serves multiple functions, including aiding in cooling, sealing against leaks, and preventing rust and corrosion. Engine oil replacement cycle: Fully synthetic engine oil should be replaced every 10,000 kilometers or approximately one year, semi-synthetic oil every 7,500 kilometers or around 6-8 months, and mineral oil every 5,000 kilometers or about half a year. Apart from environmental conditions, engine oil should also be replaced regularly because prolonged use leads to degradation of its functional properties, such as deterioration. Failure to replace it in time can result in inadequate lubrication and cleaning of the engine, causing more severe wear and tear on internal components, shortening their lifespan, and adversely affecting engine performance.
1
2
Share

Does Water Entering Through the Door Glass Gap Have Any Impact?

Water entering through the door glass gap can have significant effects on the vehicle. Here are the specific details: 1. Severe Water Ingress: The electronic modules inside the vehicle can be soaked in water. If not handled promptly and properly, it can corrode wires, connectors, and internal circuit boards, leading to vehicle alarms and functional failures. In such cases, avoid turning on electronic devices if possible. Use a mechanical key to open the door and call for a tow truck to send the vehicle to a repair facility immediately. 2. Minor Water Ingress: If there isn't a large amount of water accumulation on the floor mats, it is recommended to remove the vehicle's battery to prevent electrochemical corrosion, which could worsen the rusting of modules and connectors. Then, take out the floor mats and seat covers for cleaning and drying to prevent odors later on.
20
4
Share

What Causes a Vehicle to Pull to One Side?

The causes of a vehicle pulling to one side are typically attributed to four main reasons: uneven tire pressure between the left and right tires, inconsistent wear on the left and right tires, unequal spring travel in the shock absorbers, and brake system malfunctions. To diagnose a pulling issue, the first step is to inspect the front suspension, checking whether the ball joints and control arms are loose, and whether the tire treads are severely worn or unevenly worn. If the vehicle has been involved in an accident, it is necessary to measure the difference in wheelbase between the left and right sides, as a significant discrepancy can also cause the vehicle to pull. Vehicle pulling refers to the phenomenon where a car, while driving straight on a flat road, naturally drifts to one side, causing the alignment of the front and rear axle centers to deviate from the centerline of the driving trajectory. Minor pulling can lead to uneven tire wear and premature tire failure, while severe cases may result in dangerous situations such as tire blowouts or loss of vehicle control.
17
4
Share

Where to Apply for a Replacement Motor Vehicle Driver's License?

Replacement of a motor vehicle driver's license should be processed at the traffic police branch and district (city) county traffic police brigade. Below is an introduction regarding the replacement of a driver's license: 1. Replacement requirements: Drivers holding A1, A2, A3, B1, or B2 licenses must undergo verification at the traffic management department of the public security authority within thirty days after the end of each scoring cycle. Those who need to participate in verification study sessions must also submit proof of education issued by the traffic management department of the public security authority. Those who fail to undergo verification within the specified period must first complete the verification before applying for a replacement. 2. Replacement characteristics: After a motor vehicle driver replaces their driver's license, the original license becomes invalid and must not be used further. At the time of application, the applicant's driver's license status must not involve accumulating 12 points, overdue verification, being seized, detained, temporarily suspended, canceled, revoked, or annulled.
9
1
Share

Can You Use Water to Cool Down an Overheated Motorcycle Engine?

In theory, it is not advisable. Most motorcycles are air-cooled. However, in practice, spraying water can temporarily lower the temperature, but it may cause minor issues like difficulty starting the engine. Reasons for the engine getting hot: The engine is a high-temperature component, with intense combustion occurring inside the cylinder, much like a boiler. When there's fire (or explosions) inside, the exterior naturally becomes very hot. After just a few minutes of operation or riding one or two kilometers, the engine will become very hot to the touch, which is a normal phenomenon. No need to worry excessively about the engine getting hot: As long as the engine oil is at normal levels, the oil pump and oil passages are functioning properly, there is no abnormal friction (which would produce unusual noises), the riding and operation methods are correct and appropriate, and there is no overloading or excessive strain on the engine, there should be no issues.
18
2
Share

How much horsepower does the Magotan 2.0T have?

The maximum horsepower of the Magotan 2.0T is 200PS. The Magotan 2.0T is a sedan developed by Magotan, equipped with a 16532.0TL4 engine. It features turbocharged intake, a 6-speed dual-clutch transmission, a maximum power of 147kw, a maximum power speed range of 5100 to 6000rpm, a maximum torque of 280nm, and a maximum torque speed range of 1700 to 5000rpm. The exterior design of the Magotan was meticulously crafted by German experts, incorporating the latest fashion elements in automotive design. The dynamic and grand styling represents the new European automotive design philosophy. The sturdy V-shaped front face exudes a sense of stability and grandeur, while the sleek and stylish body lines give the Magotan an aerodynamic coefficient as low as 0.28. The waistline maintains the classic diamond proportion, maximizing interior space while maintaining moderate length, width, and height dimensions.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.