What is the ground clearance of the BYD Song Plus-DMI?

1 Answers
StDylan
07/23/25 8:36pm
The minimum ground clearance of the Song Plus-DMI is 160mm. Below is an extended explanation about minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and tree stumps without collision. Below are some advantages of the BYD Song Plus-DMI: 1. The acceleration is relatively linear and the speed increases quickly. 2. The seats are relatively soft, providing good comfort. 3. The overall interior is comfortable and does not feel cheap. 4. The rear space is large, with a completely flat floor.
Was this review help?
3
4
Share
More Forum Discussions

How to Check the Date on a Car Seat Belt?

To check the date on a car seat belt, locate the end of the seat belt where the date is usually marked. The method for replacing a seat belt is as follows: 1. Locate the wiring under the car seat to find the sensor line of the seat belt buckle. 2. Remove the seat cushion, take out the airbag, find the bolt securing the seat belt, and remove the seat belt buckle. 3. Locate the seat cushion sensor inside the seat cushion and remove it. 4. Install the new seat belt buckle onto the seat and insert the bolt. 5. Install the weight sensor onto the car seat, then attach the new retractor and tighten it with a wrench. 6. Reinstall the seat cushion onto the car seat and neatly arrange the wiring at the bottom of the seat.
10
0
Share

Where is the MG6's Cabin Air Filter Located?

The cabin air filter of the MG6 is located behind the glove box on the passenger side. The function of the cabin air filter is to separate dust, pollen, grinding particles, and other solid impurities from the air. Taking the 2020 MG6 as an example, it belongs to the compact car category, with body dimensions of: length 4704mm, width 1848mm, height 1466mm, a wheelbase of 2715mm, a fuel tank capacity of 50 liters, and a curb weight of 1300kg. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 181PS, a maximum power of 133kW, and a maximum torque of 285Nm, paired with a 6-speed manual transmission.
17
1
Share

What is the difference between hybrid electric vehicles and plug-in hybrid electric vehicles?

The differences between hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs) are: 1. Different charging methods: HEVs do not use a pure electric charging mode; PHEVs can be charged in a pure electric mode. 2. Different power sources: The main power source of HEVs is engine oil, with electricity serving only as an auxiliary function; the power source of PHEVs is the battery. The principle of HEVs is to power the car by simultaneously using the internal combustion engine and the electric motor to drive the vehicle. The principle of PHEVs is to charge the battery pack through plug-in charging, allowing the electric motor and the gasoline engine to drive the vehicle together or in pure electric mode, thereby reducing fuel consumption and air pollution.
19
5
Share

Where is the engine number located on the Sagitar?

The engine number of the Sagitar is located at the junction between the engine and the transmission. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a curb weight of 1355kg. The 2021 Sagitar features a front MacPherson strut independent suspension and a rear multi-link independent suspension, with a front-wheel-drive layout. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, paired with a 5-speed manual transmission.
14
2
Share

What is the method to determine excessive steering gear play?

To determine excessive steering gear play, look for noticeable looseness or abnormal noises. The adjustment method for excessive steering gear play is: there is an adjustment screw on each side of the steering gear, and the tighter you adjust it, the smaller the play becomes. The steering gear assists the driver by reducing the effort required to turn the steering wheel, making driving easier and more convenient. Steering gears are mainly divided into rack-and-pinion steering and worm-and-sector steering. Power steering systems include: electric power steering (EPS), hydraulic rack-and-pinion power steering, and electro-hydraulic power steering. Normally, the free play of the steering gear is about 10 to 15mm.
5
4
Share

How Many Reference Points Are There for Parallel Parking?

There are 3 reference points for parallel parking, which are detailed as follows: Finding the 30cm mark when entering the test area: Before entering the test area, the student needs to align the car body straight. After entering the test area, maintain a distance of approximately 30cm between the car body and the outer edge line of the parking space. If this distance is not accurately determined, even if all subsequent operations are correct during the reverse parking process, the car may still hit the corner of the parking space. Suggested method: The student can align the right 1/3 of the car's front with the outer edge line of the parking space and follow it. Aligning with the stop line before starting to reverse: Before reversing, the student first needs to drive the test car to the starting position of the test. If the car is not positioned correctly here, either the system will not detect the test car and the test cannot begin, or the car will cross the stop line, resulting in an immediate penalty for crossing the line. Suggested method: The student can stop when the engine hood reaches the stop line. However, this reference point varies among different students—some need to stop before reaching the stop line, while others may need to go a few centimeters beyond it. Determining the stopping position before parking: Many students fail the parallel parking test during the final stopping phase by not accurately determining the right moment to stop, thus crossing the rear line of the parking space. In fact, the scoring criteria for parallel parking do not strictly require the car body to be parallel to the parking space or the wheels to be straightened when stopping. Therefore, as long as the stopping point is correctly identified, the student can quickly press the brake, fully depress the clutch, and turn on the indicator light without needing to make any other adjustments.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.