What is the ground clearance of the BYD Qin Plus DM-i?

1 Answers
McHector
07/30/25 2:01am
The ground clearance of the BYD Qin Plus DM-i is 160mm. The minimum ground clearance of the BYD Qin Plus DM-i refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the BYD Qin Plus DM-i improves its off-road capability, but if the ground clearance is too high, the stability during high-speed driving may decrease. The BYD Qin Plus DM-i comes in 4 models with two battery range versions: the 2021 DM-i 55KM Premium, 2021 DM-i 55KM Flagship, 2021 DM-i 120KM Premium, and 2021 DM-i 120KM Flagship. The dimensions of the BYD Qin Plus DM-i are 4765mm in length, 1837mm in width, and 1495mm in height, with a wheelbase of 2718mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the BYD Qin Plus DM-i is not static—it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variation of the BYD Qin Plus DM-i. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is advisable to avoid underbody scraping or damage.
Was this review help?
2
5
Share
More Forum Discussions

How to License a New Vehicle After Obtaining the Deregistration Certificate?

After obtaining the deregistration certificate, go directly to the vehicle management office to license the new vehicle and select the option to retain the original license plate number. Prepare the relevant documentation for the old vehicle model, then submit the application. Once approved, you can install the original license plate on the new vehicle. When licensing, write "Retain Original Number" in the upper right corner of the registration form and enter the original license plate number in the designated section of the form.
15
1
Share

How to reset the oil maintenance light on a Haval H6?

Insert the key and keep the engine off. Press the reset button once to display the system that needs resetting, and each press will cycle to the next system. Select the system you need to reset and hold the reset button for approximately 3 seconds. The multifunction display on the instrument panel will show the relevant icon, indicating the maintenance light has been successfully reset.
7
0
Share

How to Remove White Spots from Aluminum Engine Surfaces?

When the surface of aluminum alloy becomes oxidized and dirty, it can be cleaned with an alkaline solution to remove the oxide film that has absorbed dirt. It is recommended to wash it with dilute hydrochloric acid. Do not soak for too long, and after washing, rinse thoroughly with clean water to ensure all areas are cleaned, and the aluminum alloy will return to a uniform color. Gently sand with sandpaper or soak in hot vinegar, but avoid soaking for too long.
8
1
Share

How to Replace the Battery in a Chevrolet Equinox Key Fob?

Remove the mechanical key. Open the key fob cover. You can partially insert the mechanical key into the key slot and then pry it upwards. Once the cover is open, you will see the position of the old battery. A flat-head screwdriver can be used to better remove the old battery. Ensure the new battery is placed with the positive side facing up. Reassemble the key fob in reverse order. Test the lock button and other functions to ensure they are working properly.
7
0
Share

How to adjust the clock on an 08 old Mercedes-Benz E280?

First, start the Mercedes-Benz E280 vehicle and select the 'Vehicle' option on the car display screen. Next, choose the 'Main Menu' content option on the Mercedes-Benz E280 car display screen. Then, select the 'Time and Date' option on the Mercedes-Benz E280 car display screen. Now you can set the digital clock time on the Mercedes-Benz E280 car dashboard. Finally, check the time on the Mercedes-Benz E280 car dashboard to complete the setup.
19
4
Share

Where is the manufacturing date of a car engine located?

Car engine manufacturing date is located on the nameplate in the engine compartment. Inside the engine compartment, there is an aluminum car nameplate that indicates the car's serial number, engine displacement, model, brand, and importantly, the specific manufacturing date. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston and perform work. The maintenance methods for car engines include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining a reasonable engine speed.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.