···
Log in / Register

What is the ground clearance of the BYD F3?

3 Answers
MacNaomi
09/03/25 7:24am
The ground clearance of the BYD F3 is 170mm. Introduction to car ground clearance: The minimum ground clearance of a car, which is the height of the chassis, typically ranges between 110mm and 150mm. Based on car parameters, if the ground clearance exceeds 130mm, the car's passability is relatively better, but its high-speed stability is poorer. If the ground clearance is less than 11cm, the car performs well at high speeds, but its passability decreases. Introduction to considerations for car minimum ground clearance: The greater the minimum ground clearance, the stronger the vehicle's ability to pass obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass obstacles or uneven terrain, but the lower the center of gravity, which can increase stability.
Was this review help?
1
4
Share
LondonLee
09/16/25 2:01am
The ground clearance of the BYD F3 ranges between 150 to 160 millimeters, which is quite moderate. It handles urban roads without issues, easily navigating small bumps and potholes. However, when driving on rough rural roads or mountain paths, you need to be cautious to avoid scraping the chassis against rocks or steps, as this can damage the undercarriage components. Having driven it for years commuting to work, I find this height strikes a good balance between passability and stability—neither too bumpy nor prone to rollovers. If you frequently drive on uneven roads, check for tire and suspension wear, as it can affect the actual clearance. Compared to similar-class cars like the Corolla, the F3's clearance is about the same. Choosing the F3 for family use is hassle-free and fuel-efficient.
Was this review help?
5
4
Share
Expand All
LaIsabela
10/30/25 2:36am
I see that the BYD F3 has a ground clearance of about 150mm to 160mm, which is sufficient for daily driving. It doesn't scrape the chassis on urban cement roads and provides a stable ride. However, when going over speed bumps or rough patches, it's important to slow down to avoid damaging the undercarriage components. With more experience, you'll realize this height is just right for ordinary families—neither too high nor too low, with safe driving being the top priority. If you frequently drive off-road, it's advisable to add an underbody guard to prevent damage. Also, regularly check and maintain proper tire pressure, as it affects both driving stability and ground clearance.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How Does Vehicle Anti-Skid System Work?

Vehicle anti-skid system works as follows: The ABS electronic control unit receives signals from the wheel speed sensors, calculates and analyzes to determine the wheel slip rate and vehicle speed. The electronic control unit then regulates the wheel slip rate by controlling throttle opening and brake pressure to prevent skidding during driving. In vehicles equipped with anti-skid systems, the system is automatically activated when powered on. It primarily analyzes information from sensors to maintain optimal dynamic balance during operation. The anti-skid system enhances vehicle stability, particularly evident during oversteering or understeering conditions.
18
4
Share

What does DSP mean in a car?

DSP in a car stands for Digital Signal Processor. DSP is the abbreviation of Digital Signal Processing in English, which translates to digital signal processing in Chinese. The function of DSP is to control frequency response, achieving certain processing and modification effects on audio signals. For example, when listening to music, there are different options such as bass, pop, rock, blues, etc. After selecting one, the tone and sound of the song will change. Digital signal processing utilizes digital processing, through computers or more specialized digital signal processors, to perform various signal processing operations. Signals processed in this manner are represented as a series of numbers that sample continuous variables in the time domain, spatial domain, or frequency domain.
17
5
Share

What level of car does the Haval F7 belong to?

Haval F7 belongs to the B-segment car category, with body dimensions of: length 4620mm, width 1846mm, height 1690mm, wheelbase 2725mm, front and rear track both 1585mm, fuel tank capacity 55l. It features front-wheel drive, with MacPherson strut independent front suspension and double-wishbone independent rear suspension. The Haval F7 is equipped with a 1.5T turbocharged engine and 7-speed dual-clutch transmission, delivering maximum power of 124 kW at 5000-5600 rpm and peak torque of 285 Nm.
13
3
Share

How Often Should Dual Clutch Fluid Be Changed?

Dual clutch fluid should be changed for the first time after 3 years or 60,000 kilometers, and subsequently every 2 years or 40,000 kilometers. It is essential to use the manufacturer's specialized fluid for replacement. Changing the transmission fluid is the most critical aspect of transmission maintenance, and it should be performed according to the manufacturer's maintenance manual. Regularly inspect the condition of the transmission fluid; if it turns black or becomes cloudy, it should be replaced promptly. Prolonged neglect of fluid changes can accelerate wear, potentially damaging the transmission gears and increasing resistance. The dual clutch, or Dual Clutch Transmission (DCT), differs from conventional automatic transmission systems. It combines the characteristics of both manual and automatic transmissions, offering the flexibility of a manual transmission and the comfort of an automatic transmission while providing uninterrupted power output.
2
5
Share

Which button is used to spray windshield washer fluid?

To spray windshield washer fluid, press the windshield wiper switch button. Windshield washer fluid is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It serves multiple functions including cleaning, antifreeze, antifog, antistatic, lubrication, and corrosion prevention. The steps to add windshield washer fluid are: 1. Open the front hood and locate the windshield washer fluid reservoir; 2. Open the packaging of solid windshield washer fluid and place it into the reservoir; 3. Add clean water until the reservoir is full; 4. Wait for the solid windshield washer fluid to completely dissolve. Precautions for using windshield washer fluid include: 1. Spray intermittently, do not spray continuously; 2. Avoid filling the reservoir to the very top.
20
4
Share

What is the reason for the difficulty in closing the trunk of the Geely Emgrand?

The reasons for the difficulty in closing the trunk of the Geely Emgrand are: 1. Use of overly stiff spring rods; 2. Inappropriate matching between the closing limit rubber block and the locking mechanism; 3. Malfunction of the trunk control circuit; 4. Failure of the trunk hydraulic support rods. The Geely Emgrand is a compact 4-door, 5-seater sedan with body dimensions of 4632mm in length, 1789mm in width, 1470mm in height, and a wheelbase of 2650mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80 kW and a maximum torque of 142 Nm. The drive system is front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.