What is the ground clearance of the BMW X3?

2 Answers
DelCorey
07/28/25 7:56pm
The ground clearance of the BMW X3 is 216mm. The following is an introduction to the minimum ground clearance: 1. Minimum ground clearance of a car: The minimum ground clearance of a car refers to the minimum height between the chassis and the ground when the car is under maximum load. 2. Car chassis: The car chassis refers to the bottom of the entire vehicle, which bears the entire vehicle. When driving, the owner should pay attention to the height of the road surface to see if their vehicle can pass. If it cannot pass, choose another route instead of forcing through, as this may damage the car's chassis.
Was this review help?
4
3
Share
AryaLee
08/12/25 12:47am
The ground clearance of the BMW X3 is approximately 204mm. I've been driving this car for several years, and it performs exceptionally well in urban environments, handling parking and speed bumps with ease. Its design ensures the body isn't too high, making it convenient for underground parking and cornering. If you occasionally want to tackle light off-road conditions like bumpy or gravel roads, this clearance is sufficient, but don't expect it to perform like a professional off-road vehicle. Remember to check tire wear and suspension condition, as they can affect the actual ground clearance. Regularly clean the undercarriage during maintenance to prevent mud buildup from affecting the clearance. The BMW X3 excels in road performance and offers reasonable fuel consumption, making it a versatile all-rounder.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

How many days does it take for a new car license plate to be delivered by mail?

Regular express delivery usually takes 3-5 days, while postal service is slower, typically taking about a week to deliver to your home. If the temporary license plate is about to expire, you can apply for an extension at the vehicle management office. Additional Information: Applying for Temporary License Plates: A motor vehicle can apply for temporary license plates up to three times, with each valid for 15 days. You can pick them up in person or have them mailed by presenting the owner's ID card, original vehicle invoice, and certificate of conformity. If mailed, as long as the recipient's address is correctly filled out, it generally takes within two weeks for delivery. If it exceeds this time, you can inquire at the local vehicle management office. Temporary license plates can be retained within the city for one month without issues as long as you don't leave the city area, and generally, no extension is needed. Vehicle Management Office: The vehicle management office is primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation, as well as applications for, replacement, renewal, and review of motor vehicle driver's licenses, and other related services concerning motor vehicles and drivers.
18
1
Share

What car has a horse on the steering wheel?

The car with a horse emblem on the steering wheel is the Ford Mustang. Here are the specific details about the Ford Mustang: 1. Vehicle Positioning: The Mustang is a sports car under the Ford brand, with dimensions of 4778/1877/1417mm (length/width/height) and a wheelbase of 2720mm. 2. Powertrain: This car is equipped with two types of engines: a 2.3-liter turbocharged four-cylinder engine and a 5.0-liter V8 naturally aspirated engine. The 5.0-liter naturally aspirated engine delivers a maximum power of 343 kW and a maximum torque of 556 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block. The 2.3-liter turbocharged four-cylinder engine produces a maximum power of 220 kW and a maximum torque of 434 Nm, utilizing direct fuel injection technology and an aluminum alloy cylinder head and block. 3. Suspension: The Mustang uses a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link independent suspension enhances wheel traction and improves the car's handling.
12
5
Share

How to Deal with the Squeaky Sunroof on a Prado?

Toyota Prado may develop squeaking issues when opening or closing the sunroof if it hasn't been regularly maintained over time. Here are the solutions to address the squeaky sunroof on a Toyota Prado: 1. First, turn on the vehicle's ignition, press the sunroof switch button, and ensure the interior and exterior are quiet. Observe the sunroof's movement track to check for any noticeable up-and-down fluctuations. If present, this likely indicates component aging, and the only solution is to replace the affected parts. 2. Repeatedly open and close the sunroof while maintaining a noise-free environment. Carefully listen to pinpoint where the squeaking originates and at which point during the movement it occurs. Once the problematic area is identified, use a tissue to clean the dust from the groove under the sunroof's front wind deflector. Press the front wind deflector by hand to check if the sunroof feels too tight. If it does, apply some grease to the groove.
13
5
Share

Is the Kawasaki X300 struggling to enter Tibet?

If there are no special circumstances, the Kawasaki X300 is completely fine. Here is some relevant information about the Kawasaki X300 entering Tibet: Entry-level: The displacement of the X300 determines that it is only an entry-level model in Kawasaki's product line. Its mission is to travel from one city to another, not to cross the African wilderness. If Kawasaki plans to make a large ADV in the future, it's uncertain whether it will be called the Versys-X1000, but its pricing will definitely be in the six-figure range. Because of the X300's 'light adventure' positioning, it won't be equipped with imposing but impractical large side cases that can cause instability. However, many domestic riders have an immature concept of motorcycles, thinking that any bike with large side cases becomes an ADV, and without them, it's not an ADV. This misconception will take a long time to correct. Accessories: The factory crash bars may not be as flashy or high-end as Rizoma's, but in the event of a fall, the factory bars won't bend the frame or break the mounting points. This is the value of factory bars—their worth lies not in appearance but in functionality and integration.
4
2
Share

How to adjust the headlight height on A4L?

A4L headlights can be mechanically adjusted for height, which involves adjusting the proportion relative to the vehicle body level. Under stationary conditions, the headlights can be relatively adjusted using the small hexagonal wrench located on the left front fuse box. Afterward, the level sensor will reference this height value for further adjustments. The left headlight's cutoff line is set lower than the right headlight's for safety reasons. Generally, the factory settings are optimal, and manual adjustments should be avoided. More details are as follows: 1. Car headlights, also known as front headlights or LED daytime running lights, are not only crucial for a car owner's appearance but also essential for safe driving at night or in poor weather conditions. The use and maintenance of car lights should not be overlooked. 2. Only the 1.8T version of the Audi A4L comes with a headlight height adjustment knob. The 2.0T and higher configurations do not have this knob, as the headlights automatically scan and adjust their height when turned on. This is because the high-end xenon headlights feature a bi-xenon projector system that automatically adjusts the position of the internal shutter to control the light height, eliminating the need for manual adjustments. The lower-end models use separate halogen lights for high and low beams, allowing for manual height adjustments.
2
1
Share

How is the Subaru Forester?

Here are the detailed specifications of the Subaru Forester: 1. Body Dimensions: The Forester is a compact SUV under the Subaru brand, with a length of 4640mm, width of 1815mm, height of 1730mm, and a wheelbase of 2670mm. 2. Powertrain Configuration: The Forester is equipped with a 2.0-liter four-cylinder naturally aspirated horizontally opposed engine across all trims. This engine delivers a maximum power of 113kW and a peak torque of 196 Nm. The maximum power is achieved at 5800-6000 rpm, while the maximum torque is available at 4000 rpm. 3. Suspension Setup: The Forester features a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. The double-wishbone suspension is a structurally complex independent suspension system, consisting of left and right wishbones.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.