What is the ground clearance of the BMW 3 Series GT chassis?

How Often Should the Santana Spark Plugs Be Replaced?

Under normal maintenance conditions, Santana spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten further. Reinstall the high-voltage ignition wires in the correct firing order, then secure the cover.

15

4

Share

What engine is used in the Baojun 310?

The engine of the Baojun 310 is produced by SAIC-GM and belongs to a domestically manufactured four-cylinder naturally aspirated engine. The engine model of the Baojun 310 is LMH, with a maximum power of 59 kW, a maximum torque of 112 Nm, and a maximum horsepower of 80 Ps. For daily maintenance of the Baojun 310 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate; When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

6

2

Share

Replace or Repair the Trunk Lid?

It depends on the extent of damage to the trunk lid. Here are specific evaluation methods: 1. If the trunk lid has minor damage and a small affected area, it can simply be repaired. This approach ensures safety while being cost-effective. 2. If the trunk lid sustains significant damage over a large area, replacement is recommended for safety reasons. Additional information: 1. The trunk lid serves to protect items stored in the trunk and can also mitigate impact in rear-end collisions to some extent. 2. For paint scratches on the trunk lid: minor damage can be treated with a touch-up pen; extensive damage requires repainting and polishing; if deformation occurs, professional auto body repair at a service center or 4S shop is necessary. 3. Extensive repairs to the trunk lid may compromise its structural rigidity, reducing its energy absorption capability during impacts. 4. When replacing the trunk lid, it's advisable to use a 4S shop. Although potentially more expensive, they guarantee quality parts and use original factory paint, preventing color mismatch issues.

5

Share

What is the normal temperature of coolant?

The normal temperature is indicated when the needle points to 90°C at the center of the gauge. After starting the vehicle, the antifreeze temperature rises rapidly. Once the needle reaches the central position, the heat exchange reaches equilibrium and the antifreeze temperature stabilizes. Generally, it's optimal to start driving when the temperature reaches the middle position. More information about coolant is as follows: 1. Introduction: Its full name should be antifreeze coolant, meaning it has antifreeze functionality. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block during cold seasons when the vehicle is parked. However, it's important to correct a common misconception: antifreeze is not just for winter use; it should be used year-round. In regular vehicle maintenance, the engine antifreeze should be replaced every year. 2. Function: Automotive coolant is used to regulate the engine's temperature. If the temperature is too high, the engine cannot operate within its normal temperature range. Moving parts may expand due to heat, disrupting normal clearance tolerances, and lubricants may burn, degrade, or lose viscosity due to high temperatures, leading to seized components or accelerated wear. The normal operating temperature should be around 90°C; temperatures significantly higher or lower can cause damage to the vehicle.

17

3

Share

Why does the car key not work after replacing the battery?

Car key not working after battery replacement is due to remote key failure, requiring re-pairing after battery replacement. Below are the specific steps for key pairing: 1. Insert the remote key, turn to the "II" position, then quickly return it to the "0" position. 2. Repeat this process 4 times, then quickly remove the key. 3. Press any button, such as the unlock button, for 4~5 seconds until you hear a "click" sound inside the car, indicating the key coding is complete. Here is additional information: 1. Smart keys can emit infrared signals to open one or two doors, the trunk, and the fuel filler cap, and can also operate the car's windows and sunroof. 2. Typically, when the owner approaches the vehicle within about one meter, the door locks will automatically open and disable the anti-theft system. When leaving the vehicle, the door locks will automatically lock and activate the anti-theft system. When the owner enters the car, the in-car detection system immediately recognizes the smart card, and the vehicle can be started by simply pressing the start button (or turning the knob) without needing to take out the key. 3. The car smart keyless entry system, abbreviated as PKE, uses the world's most advanced RFID wireless radio frequency technology and the most advanced vehicle identity coding recognition system.

20

2

Share

How many liters of antifreeze does a Cruze need?

The Cruze requires 4 liters of antifreeze. Antifreeze prevents the coolant from freezing and expanding in cold winter conditions, which could crack the radiator or damage the engine cylinder block or head. Vehicle antifreeze generally needs to be replaced every 2 years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with higher mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Regularly check the antifreeze level and replenish it promptly if it is low. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the antifreeze, replace it immediately and flush the system. The key indicators for antifreeze are its freezing and boiling points. Market-available antifreeze comes in specifications with freezing points of -15°C, -25°C, -30°C, and -40°C. It is advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Always use the same brand of antifreeze. Different brands may have varying formulations, and mixing them could lead to chemical reactions between additives, rendering them ineffective.

12

5

Share

What is the ground clearance of the BMW 3 Series GT chassis?

How Often Should the Santana Spark Plugs Be Replaced?

What engine is used in the Baojun 310?

Replace or Repair the Trunk Lid?

What is the normal temperature of coolant?

Why does the car key not work after replacing the battery?

How many liters of antifreeze does a Cruze need?

Which Cars Have Three-Way Catalytic Converters?

What does the car ECO mode mean?

How to Apply for a Beijing Entry Permit for Out-of-Town Vehicles on 12123?

What does the INSP warning light in a car mean?