···
Log in / Register

What is the ground clearance of the Bluebird when fully loaded?

6Answers
McTaylor
07/29/2025, 07:14:13 AM

The ground clearance of the Bluebird when fully loaded is 167mm. The Bluebird is a sedan series launched by Nissan. The dimensions of this car are 4683mm in length, 1780mm in width, and 1465mm in height. The Bluebird is equipped with an upgraded 1.6L naturally aspirated engine, with a maximum power of 93kW and a maximum torque of 154Nm. The Nissan Bluebird's headlights feature a boomerang-style design, exuding a bold and powerful look. Smooth lines run through the entire side profile, making it stand out. The new-style D-shaped multifunctional steering wheel, the dashboard design with rich lines and distinct layers, adopts a cool red and black color scheme, various diamond-shaped textures, and a carbon fiber texture akin to a luxury sports car. The dashboard is equipped with ambient lighting.

Was this review help?
111
Share
McKarter
08/13/2025, 02:01:17 PM

As a seasoned driver with years of experience behind the wheel of a Bluebird, I recall its full-load ground clearance was approximately 150mm. This is quite crucial for urban daily driving because if the clearance is too low, the risk of scraping the undercarriage increases, such as when navigating steep ramps or speed bumps, requiring extra caution. Once, during a family trip with the car fully loaded with luggage, we traversed a bumpy road section without any issues thanks to this clearance. It's also essential to consider tire wear and the suspension system—if maintenance is neglected, the clearance can decrease, affecting driving comfort and safety. Therefore, I recommend regularly checking the chassis height, especially for owners who frequently embark on long-distance journeys.

Was this review help?
13
Share
Expand All
ReaganLee
10/07/2025, 11:04:52 PM

As someone who often helps friends with car repairs, I've measured the Bluebird's fully loaded ground clearance to be around 150mm. This height is moderate and suitable for most road conditions, but if you're a beginner, you might find it not particularly high because you need to slow down when going over bumps to avoid scraping. I've also noticed that weight distribution affects the clearance—with rear seats loaded and luggage added, the rear end sinks slightly, reducing the clearance. I'd like to remind everyone to pay attention to front-rear balance when fully loaded, as it can improve passability. Daily maintenance, such as keeping tire pressure correct, helps maintain stable clearance.

Was this review help?
1
Share
Expand All
MacPeyton
11/20/2025, 11:22:33 PM

As a younger Bluebird owner, I found that the ground clearance when fully loaded is around 150mm. This figure is neither too low nor too high, making it quite suitable for urban streets. Here's a little tip: avoid overloading to keep the clearance within a safe range. Plus, the Bluebird's chassis design is quite durable, so occasional drives on dirt roads are no problem. Regular maintenance can prevent significant changes in clearance from affecting your driving.

Was this review help?
11
Share
Expand All
McJoanna
01/11/2026, 01:00:56 AM

I've driven the Bluebird for many years, with a classic ground clearance of about 150mm when fully loaded. The car's design was quite reasonable for its time, performing decently on both highways and muddy roads. This relates to the suspension system—when fully loaded, the spring compression slightly reduces the clearance, but as long as the tire pressure is normal, there's no major issue. Reflecting on the technology of older cars, the Bluebird's specs were quite impressive.

Was this review help?
5
Share
Expand All
SanBethany
04/07/2026, 10:22:11 PM

As a car enthusiast, the Bluebird's fully loaded ground clearance is typically 150mm. This height ensures the chassis isn't scraped, especially when fully loaded. Factors like luggage weight and suspension condition affect it—too heavy and the clearance shrinks further. I often remind friends to check this data as a safety indicator, paired with regular chassis maintenance, to avoid damage from road potholes.

Was this review help?
4
Share
Expand All
More Q&A

Which company is Baizhi New Energy Vehicle under?

Baizhi New Energy Vehicle belongs to Shanghai Shan'an Baizhi New Energy Technology Co., Ltd. The introduction of new energy vehicle types is as follows: Pure Electric Vehicle: It is a vehicle that uses a single battery as the energy storage power source. It utilizes the battery as the energy storage power source, providing electrical energy to the motor through the battery, driving the motor to operate, thereby propelling the vehicle. Hybrid Electric Vehicle: It refers to a vehicle whose drive system consists of two or more individual drive systems that can operate simultaneously. The vehicle's driving power is provided by a single drive system or multiple drive systems jointly, depending on the actual driving state of the vehicle. Other New Energy Vehicles: Include vehicles using high-efficiency energy storage devices such as supercapacitors and flywheels. Currently, in China, new energy vehicles mainly refer to pure electric vehicles, extended-range electric vehicles, plug-in hybrid electric vehicles, and fuel cell electric vehicles. Conventional hybrid vehicles are classified as energy-saving vehicles.
116
Share

Is a Scratched Car Chassis Serious?

Whether a scratched car chassis is serious mainly depends on the location of the impact. Exhaust Pipe Impact: If only components like the exhaust pipe or catalytic converter are affected, the damage is limited to the exhaust system. Suspension Impact: If suspension parts, such as the control arm, are severely impacted and deformed, the vehicle's wheel alignment parameters may be disrupted, potentially causing steering deviation or severe friction noises. Structural Reinforcement Impact: If the chassis reinforcement components are scratched, leading to coating damage or even exposing bare metal, immediate attention is required to prevent severe rusting. A thorough inspection with the vehicle lifted is necessary to assess the damage accurately. Different impacts require specific repair techniques based on their location and severity.
118
Share

What procedures are required for vehicle inspection in another location?

The documents required for vehicle inspection in another location are as follows: original ID card; vehicle license; copy of compulsory traffic insurance; vehicle and vessel tax certificate; vehicle inspection authorization letter for another location. Inspection of vehicle components: Check whether the engine, chassis, body and its accessories are clean, complete and effective, whether the paint surface is uniform and beautiful, whether the main assemblies have been replaced, and whether they match the initial inspection records. Inspection of vehicle functions: Check whether the vehicle's braking performance, steering control, lights, exhaust and other safety performance meet the technical requirements for safe operation of motor vehicles. Check whether the vehicle has been modified: Check whether the vehicle has been modified, remodeled or transformed, whether the driving license, license plate and all vehicle file records match the vehicle condition, whether there are any changes, and whether the approval and change procedures have been completed.
117
Share

How long does it take for 12123 to review the filing of a non-personal motor vehicle?

12123 filing for non-personal motor vehicle review generally does not exceed 7 working days, and the processing time depends on the number of applications submitted to the traffic management department. 12123 filing rules: Only personal motor vehicles can be filed, and the filed vehicles must be small cars or small new energy vehicles; users can file no more than 3 non-personal motor vehicles at the same time (including 3); the same motor vehicle can be filed by no more than 3 non-owner users at the same time (including 3). Notes for 12123 filing: 12123 filing only allows filing personal motor vehicles and generates a QR code for the filer's motor vehicle; after successful filing, you can query traffic violations recorded by traffic monitoring devices for non-personal motor vehicles, and handle non-scoring violations or scoring violations that occurred after filing and are applicable to the simplified procedure for non-personal motor vehicles.
104
Share

Can China III Motorcycles Still Be Registered?

China III motorcycles can no longer be registered now, as they have been ineligible for registration since July 2019. After July 2019, only China IV motorcycles that meet the standards can be registered, because the exhaust emission standards of China III motorcycles did not meet the requirements, leading to their discontinuation in production and sales. Documents required for motorcycle registration: The original invoice of the motorcycle to be registered, the owner's ID card, and the original certificate of conformity of the motorcycle. Additionally, the original compulsory traffic insurance policy for the motorcycle and the proof of payment for the purchase tax are required. Procedures for motorcycle registration: First, the certificate of conformity of the motorcycle needs to be inspected and stamped by the traffic police department. Then, with the invoice, ID card, and other documents, the purchase tax should be paid at the tax bureau. After completion, the motorcycle will be photographed and the registration procedures will be handled at the traffic police department.
117
Share

Below what tire pressure should you no longer drive?

Tire pressure below 1.7bar is unsafe for driving. Vehicles are typically equipped with a tire pressure monitoring system, which usually triggers an alarm when the tire pressure falls below 1.8bar. Therefore, this value is also applicable to tires without tire pressure monitoring sensors, and it is recommended not to go below this threshold. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and tendencies to veer, compromising driving safety; Increases movement in various parts of the tire, causing abnormal heating due to excessive rolling; Degrades the function of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, sharply raising the tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to a blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movements, leading to excessive heat, accelerating rubber aging, fatigue in the cord layer, cord breakage, and increases the tire's contact area with the ground, hastening shoulder wear.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.