What is the ground clearance of the BJ80?

3 Answers
LaNadia
07/23/25 8:15pm
The minimum ground clearance of the BJ80 is approximately 250 millimeters, a height that allows this vehicle to handle most complex road conditions. The BJ80 is a rugged off-road vehicle, equipped with a 2.3-liter turbocharged engine across all models. This engine delivers a maximum power of 170 kilowatts and a peak torque of 345 Newton-meters, paired with a 6-speed automatic transmission. The BJ80 features a part-time four-wheel-drive system, which enhances its off-road capabilities. This four-wheel-drive system offers three modes: high-speed four-wheel-drive mode, low-speed four-wheel-drive mode, and high-speed two-wheel-drive mode. The dimensions of the BJ80 are 4765 millimeters in length, 1955 millimeters in width, and 2005 millimeters in height, with a wheelbase of 2800 millimeters.
Was this review help?
18
1
Share
McDaniel
08/10/25 3:51pm
The ground clearance of the BJ80, also known as the minimum ground clearance, is approximately 215 mm in standard configuration. I find this quite interesting because it falls into the medium-to-high range among SUVs, capable of handling general off-road conditions such as gravel or muddy roads without scraping the undercarriage. When evaluating the vehicle, I noticed that this height provides good passability but results in a slightly higher center of gravity, requiring extra caution during high-speed turns to avoid excessive body roll. In cases of deep potholes or steep slopes, this ground clearance proves highly beneficial, preventing the embarrassment of undercarriage damage. It is recommended to regularly inspect the suspension system to maintain stable clearance, which enhances overall driving safety and convenience, especially when navigating rural areas with numerous narrow paths, making the driving experience more worry-free.
Was this review help?
9
4
Share
Expand All
CodyFitz
09/23/25 3:16am
When it comes to the ground clearance of the BJ80, the official data is around 215mm. I've test-driven it several times and found this height genuinely sufficient for off-road use. Whether climbing small hills or navigating through water-filled pits, it handles them with ease—unlike some city SUVs that sit too low and risk getting stuck. The higher chassis also provides better visibility, boosting my driving confidence. Although fuel consumption might increase slightly, the enhanced off-road capability is a big plus. Personally, I prefer this design because it strikes a balance between daily commuting and occasional adventures. Plus, maintenance is straightforward—just keep an eye on tire wear to avoid affecting height stability. Overall, it's a practical choice for those who want both fun and functionality in their lives.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What is the Beijing Hyundai Celesta?

Beijing Hyundai Celesta is the Hyundai Elantra. Below are the specific details about the Elantra: 1. The exterior of the Elantra belongs to the agile and compact type. The headlights and grille are designed to slope upwards, giving a sleek visual impression. The front end is composed of full curves and lines, making it look powerful yet stable. The wave-like lines on the side of the body are Hyundai's signature, with smooth body lines that give it a dynamic appearance. 2. In terms of interior design, the Hyundai Elantra features a very simple layout. The craftsmanship is standard, and the dashboard uses a lot of hard materials. It comes with a three-spoke multifunctional steering wheel, dual circular mechanical gauges, and a floating LCD screen. 3. In terms of performance, the Elantra is equipped with a 1.6L engine paired with a 6-speed automatic transmission, delivering a maximum output of 123 horsepower. The power output could be considered one of the few drawbacks of the Elantra. Of course, it's not necessarily a flaw, as this level of power is sufficient for various driving conditions. However, nowadays, small-displacement engines dominate the mid- and low-end car market, with 1.0T and 1.3T three-cylinder engines becoming increasingly common.
12
5
Share

How often should the transmission fluid be changed for the New Sagitar 1.6?

The transmission fluid replacement interval for the Sagitar 1.6 is every 60,000 kilometers, with a replacement capacity of 4L. Volkswagen Sagitar transmission fluid replacement methods: 1. Gravity replacement: The method and principle are the same as for engine oil. Using tools to loosen the nut, the transmission fluid will automatically flow out under gravity. This method is the most common and easy to operate, but it cannot completely drain the old transmission fluid. Dirty old transmission fluid may remain in mechanical depressions and dead corners. 2. Circulation machine replacement: New transmission fluid is added to the circulation machine, and the machine's pipes are connected to the transmission's oil lines. The new fluid pushes out the old fluid under the action of the circulation machine. This method cleans the oil lines more thoroughly. The more new transmission fluid used in the circulation machine, the cleaner the old fluid will be discharged. This method typically uses about 10-15L of fluid per replacement and takes approximately 1 hour. 3. Oil pan removal replacement: This method allows for cleaning the oil filter and flushing the oil pan, addressing the issue at its root. Removing the oil pan is a significant task, and the corresponding labor cost will be higher.
15
5
Share

How to Open the Bonnet of the Binyue?

There is an unlock button in the control area on the left side of the steering wheel. Press it to pop up the bonnet, then reach in and pull the latch to open it. Below are the specific functions of the bonnet: 1. Airflow guidance. For objects moving at high speed in the air, the air resistance and turbulence generated by the airflow around the moving object directly affect its trajectory and speed. The shape of the bonnet can effectively adjust the direction of the airflow relative to the car's movement and the resistance force, reducing the impact of airflow on the car. 2. Protection for the engine and surrounding components. Under the bonnet are crucial parts of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and structure of the bonnet, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the normal operation of the vehicle. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the bonnet plays a critical role in enhancing visual appeal and embodying the concept of the entire car. 4. Assisting driver visibility. During driving, the driver's ability to correctly judge road conditions and the situation ahead heavily relies on the reflection of natural light and the view ahead. The shape of the bonnet can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver.
4
3
Share

What Type of Tires Are Suitable for Ford Focus?

Ford Focus is suitable for Michelin ENERGYXM2 (Toughness and Joy), which is primarily designed for small and medium-sized sedans. Specifically tailored for Chinese road conditions, its advantages include safety, durability, and long mileage, while also offering comfort and quietness. The "highly elastic tread rubber" enhances mechanical grip, effectively reducing braking distance. The tire's structure utilizes high-strength cord fabric, increasing tire strength and minimizing the risk of sudden damage. Below is a detailed introduction to the tires: 1. Tires are one of the most crucial components of a vehicle, serving several key functions: supporting the entire weight of the vehicle and bearing its load; transmitting traction and braking torque to ensure adhesion between the wheels and the road; absorbing and mitigating vibrations and impacts during driving to prevent excessive shaking and premature damage to vehicle components; adapting to high-speed performance while reducing driving noise; and ensuring driving safety, handling stability, comfort, and fuel efficiency. 2. For superior performance across all aspects, opt for premium international brands like Michelin, Pirelli, Continental, Goodyear, or Bridgestone, though these come at a higher price. For more economical options, consider second-tier brands such as Chaoyang, Giti, Wanli, Warrior, Linglong, Jinyu, or Luhang, which offer excellent value for money.
16
3
Share

Where is the cabin air filter located in the Soueast DX7?

The cabin air filter in the Soueast DX7 is located behind the glove box on the passenger side. Below are specific details about the cabin air filter: 1. The cabin air filter model for the Soueast DX7 is LAK948. The recommended replacement interval is generally every 8,000 to 10,000 kilometers driven, but this may vary depending on the vehicle's operating environment. If the environment has significant humidity variations, year-round dry climate, or heavy dust conditions, the filter should be replaced earlier. 2. The automotive cabin air filter is specifically designed for air purification inside the vehicle compartment. It utilizes highly efficient adsorption materials, combining activated carbon with long-fiber non-woven fabric to create an activated carbon composite filter cloth. This compact structure effectively filters smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently captures and adsorbs particulate matter, achieving oil filtration and air purification while effectively removing organic gases such as TVOC, benzene, phenol, ammonia, formaldehyde, xylene, and styrene. It serves as an ideal material for high-end cars, sedans, and commercial vehicles as an automotive cabin air filter. 3. The purpose of the automotive cabin air filter is to prevent these harmful substances from entering the air conditioning system and damaging it. It provides a clean air environment for vehicle occupants, protects their health, and helps prevent window fogging.
19
1
Share

How to Turn on the Low Beam Headlights of Haval H6?

To use the low beam headlights of Haval H6, first turn on the headlight switch, then rotate the light switch knob to the low beam position. The following are specific introductions to the high and low beam headlights: 1. The lower limit position of the low beam headlights does not need to be too precise, as long as you can clearly see the road about 20 meters ahead. 2. The high beam headlights can be turned on by pushing the lever outward, but there is a prerequisite for turning on the high beam: the low beam headlights must be on. The high beam cannot be turned on when the light is in other positions (off or position lights). However, pulling the lever inward to flash the high beam once has no restrictions and can be operated even when the lights are off. 3. The headlights have two modes: high beam and low beam. Use low beam on urban roads with streetlights and high beam on roads without streetlights or highways. When passing intersections or overtaking, alternately switch between high and low beams to signal. The position lights, commonly known as "small lights," are used to display the width and length of the vehicle at night, alerting other vehicles and pedestrians to your presence. When you cannot see clearly behind you in the rearview mirror, it's time to turn on the small lights, including during rainy days.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.