What is the ground clearance of the Audi Q7?

Can the Car Still Be Driven When the Engine Shakes?

Can the car still be driven when the engine shakes? The reasons for engine shaking are: 1. Aging or loosening of engine mounts; 2. Engine misfire; 3. Severe carbon buildup in the engine; 4. Bulging tires or deformed wheel rims; 5. Leakage in the intake pipe or EGR valve; 6. Loose chassis components. The methods to address engine shaking are: 1. Read fault codes or data streams to rule out sensor failures; 2. Check if the exhaust gas recirculation valve has issues; 3. Inspect spark plugs, high-voltage wires, ignition coils, fuel injectors, timing marks, fuel pump pressure, and cylinder pressure; 4. Check if the idle control valve has problems, and clean the throttle body and idle control valve.

6

4

Share

How long does it take to check provincial traffic violations?

Provincial traffic violations can usually be checked within about a week. Below are specific explanations for querying motor vehicle violation information: 1. When a motor vehicle commits a violation: If penalties are required according to regulations, the public security network generally publishes the violation information within 7 working days. 2. Electronic monitoring police processing: The processing cycle for electronic monitoring by police is approximately 3-5 working days. Whether a motor vehicle is suspected of violating regulations can usually be checked after about a week. If no results are found, it can generally be confirmed that there are no violations. 3. Cross-province/municipality/autonomous region violations: The query time for violations across provinces, municipalities, or autonomous regions may extend to more than 15 working days.

11

3

Share

What is the difference between manual-automatic transmission and manual transmission?

The difference between manual-automatic transmission and manual transmission lies in the shifting method: manual-automatic transmission uses an up-push for upshifting and a down-push for downshifting, while manual transmission employs a clutch-based shifting method. Manual-automatic transmission combines both manual and automatic shifting methods, serving as a type of automatic transmission that simulates the operation of a manual transmission through an electronic control system. Manual transmission refers to vehicles that use a manual shifting mechanical gearbox to adjust speed, where the gear lever must be manually moved to change the gear engagement position inside the transmission, altering the gear ratio to achieve shifting. The gear lever can only be moved when the clutch is depressed.

3

0

Share

What is the appropriate headlight height adjustment level?

Generally, the headlight height should be adjusted to position 0. The adjustment knob is usually located on the left side of the dashboard, near the light control switch. The knob is marked with numbers from 0 to 3, where higher numbers indicate lower beam height. Headlight height adjustment guide: Position 0 is the default horizontal setting, suitable when front seats are occupied and the trunk is empty. Positions 1 to 3 are appropriate when the vehicle is fully loaded with passengers and cargo. Since a vehicle's height isn't fixed and changes with suspension travel when loaded or unloaded, proper headlight adjustment is necessary to maintain driving safety, especially at night, by compensating for changes in vehicle level height.

6

3

Share

What to Do When Car Doors Won't Open in Winter?

If car doors are frozen and won't open in winter, you can use a hairdryer to melt the ice on the doors. Here is some relevant information: 1. Precautions for changing tires: Choose better winter tires for replacement; pay attention to the vehicle's tire pressure; maintain the tire sidewalls and regularly inspect them to ensure they are intact. 2. Winter car usage tips: To prevent doors from freezing in winter, you can inject a small amount of lubricating oil into the door lock cylinder and apply a thin layer of grease around the door seals to prevent freezing. For the braking system, replace brake pads promptly. Among the items for brake system maintenance, regularly checking the brake fluid level is the most important. Check it at least once a month.

2

1

Share

Should a section be left uncovered for rearview mirrors when applying window film?

Whether to leave the rearview mirror area uncovered when applying automotive window film depends on the quality of the film. Generally, high-quality films do not require leaving an additional uncovered area because they provide sufficient clarity. However, for inferior quality films, it is recommended not to apply them on the rearview mirrors and corresponding rear windshield. Relevant information about automotive window films is as follows: 1. Introduction: Automotive window film (Auto-tint-film) refers to applying a thin film-like material on the vehicle's front and rear windshields, side windows, and sunroof. This film-like material is also called solar film or heat-insulating film. 2. Functions: The main functions are to block ultraviolet rays, reduce heat transmission, prevent injuries caused by glass shattering, reduce glare, and protect personal privacy based on the one-way visibility feature of the solar film.

18

1

Share

What is the ground clearance of the Audi Q7?

Can the Car Still Be Driven When the Engine Shakes?

How long does it take to check provincial traffic violations?

What is the difference between manual-automatic transmission and manual transmission?

What is the appropriate headlight height adjustment level?

What to Do When Car Doors Won't Open in Winter?

Should a section be left uncovered for rearview mirrors when applying window film?

What does a local driver's license mean?

Which Porsche model has four exhaust pipes?

Why did a traffic violation record inexplicably appear on my driver's license?

Does the Engine Filter Need to Be Replaced?