What is the ground clearance of the Audi A4L?

2 Answers
ValeriaLee
07/29/25 7:11am
The ground clearance of the Audi A4L is 107mm. Here is the relevant content introduction: The entire chassis of the Audi A4L is equipped with complete protective plates, and the heat insulation treatment of the exhaust pipe is also thorough, which facilitates rapid airflow passage, resulting in better overall aerodynamic performance. Both front and rear brakes use disc brake structures, with the front brake caliper adopting a fixed four-piston design. The dimensions of the Audi A4L are 4818mm in length, 1843mm in width, and 1432mm in height, with a wheelbase of 2908mm. The interior of this car continues the Audi family-style design, featuring exquisite craftsmanship and high-quality materials. The Audi A4L is also equipped with the Audi dynamic steering system, which can adjust the gear ratio based on driving speed and the selected Audi driving mode.
Was this review help?
14
3
Share
OParker
08/12/25 11:51pm
I previously drove an Audi A4L for some time, and its ground clearance typically ranges between 140mm to 150mm, which is about 14-15 centimeters. This height provides stable daily driving in the city, and it doesn't easily scrape the chassis when going over bumpy roads. Parking is also relatively hassle-free, as the rearview mirrors provide a clear view of the position, making it suitable for commuters or family use. However, during rainy days, be cautious about the depth of water accumulation, as too high a level might cause slipping. It's advisable to regularly check the shock absorbers; if the car feels wobbly, it's time to visit the shop. After all, a lower chassis reduces handling flexibility, and comfort is crucial during long-distance driving.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What is the remote start tutorial for the Land Rover Range Rover?

First, you need to download the official app and register. After passing the manufacturer's verification, you can follow the function keys on the app to perform a remote start. Aim the key at the vehicle and press the lock button on the key. Within 5 seconds, hold the remote start button on the key for at least 4 seconds, or until the vehicle's turn signals flash. The parking lights will illuminate, and the doors will lock. After entering the vehicle during a remote start session, press the brake pedal and turn the ignition switch to the on position to drive the vehicle.
9
5
Share

How to Adjust the Dome Light Not Turning On When Opening the Door in a Land Rover?

If the interior light of a Land Rover Range Rover does not turn on when opening the door, it means the door control function has been turned off. You need to press the door control switch of the interior light to activate it. Open the driver's side door of the Land Rover Range Rover and step on the brake pedal. Press the one-touch start button of the Land Rover Range Rover to start the engine. The dashboard will light up, indicating that the engine has been started. There is a contact switch on the door. Press the door control switch of the Land Rover Range Rover to activate the interior light door control mode.
3
2
Share

How to Maintain a Land Rover Evoque?

Press the one-touch start ignition, use the function keys on the right side of the steering wheel, which are the 4 directional keys and 1 OK key, to find the vehicle information option on the dashboard. Locate the "Recent Alerts" option and press "OK" to enter. Simultaneously hold down the "Down" button on the right side of the steering wheel and the "i" button at the end of the turn signal lever, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle and check if the reset was successful. If not, repeat the operation.
7
3
Share

How to Engage Reverse Gear in a Kia Manual Transmission?

Locate the R gear on the Kia gear shift lever, which is designated for reverse. Engaging this gear allows the vehicle to move backward. Press down on the brake pedal of the Kia K2, leaving the accelerator pedal untouched for now. Press the Kia K2's one-touch start button to illuminate the dashboard and start the vehicle. Shift the Kia K2's automatic gear lever to the R position to enter reverse mode. Apply the brakes if there are obstacles, and gently press the accelerator if you need to increase speed. Once reversing is complete, depress the clutch, disengage the reverse gear, and release the clutch.
19
5
Share

How to Solve the Problem of Scooter Motor Spinning Freely?

When pressing the electric start button of the scooter, you can only hear the motor spinning freely without starting the vehicle. This may be caused by damage to the motor reduction gear. First, remove the transmission side cover. Check the reduction gear and find that the scooter motor cannot reset, confirming that the motor spinning freely is due to damage to the motor reduction gear. It is found that the reduction gear sleeve is severely worn and may no longer be usable. It is necessary to find the sleeve, reduction gear, and pressure cover according to specifications. Replace the sleeve, reduction gear, and pressure cover, then reassemble the vehicle. This will effectively solve the problem of the scooter motor spinning freely.
6
0
Share

What to Use to Clean Tar on a Car?

If there is rust, remove the rust first. Direct polishing can remove the rust. Choose a good anti-rust and waterproof coating to repair the rusted holes. When performing anti-rust work, it is best to use the same type of paint to prevent different paints from reacting with each other. After repairing the rusted holes on the chassis, apply a plastic sealant to the bottom of the car to prevent rust. To maintain the chassis in winter, perform a thorough chassis cleaning and anti-rust treatment. First, clean the chassis thoroughly.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.