What is the ground clearance of the Accord?

1 Answers
SanMolly
07/23/25 8:16pm
The minimum ground clearance of the Accord is 100 millimeters. The minimum ground clearance of the Accord refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Accord, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The Accord is a leisure sedan developed by Honda based on the Accord platform. The Accord Crosstour features a design similar to the BMW X6, blending elements of a four-door sedan and a five-door station wagon, making it a distinctive crossover model. The dimensions of the Accord are 4906 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Accord is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Accord's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving on well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to rural areas or driving on rough terrain, a vehicle with higher ground clearance is preferable to avoid scraping or damaging the undercarriage.
Was this review help?
4
0
Share
More Forum Discussions

How to Adjust the Time on a Verna?

Method to adjust the time on a Verna: Press and hold the CLOCK button until the numbers on the clock start flashing. Rotate the knob to change the numbers, and press the knob to switch the position of the number being adjusted. Once the time is set, press the knob again to stop the numbers from flashing. The operation for adjusting the time may vary across different car models. The Verna is positioned as a compact car, with body dimensions of 4300mm in length, 1705mm in width, and 1460mm in height, and a wheelbase of 2570mm. The Verna is equipped with Hyundai's new 1.6 CVVT engine, and there are also models available with a 1.4L engine of the same series, paired with either a 5MT or 4AT transmission.
8
2
Share

What is the method for replacing the coolant in the Lavida?

Method for replacing the coolant in the Lavida: First, locate the coolant reservoir. Follow the reservoir to find the hose underneath, then identify the position of the hose clamp. Use clamp pliers to grip the clamp, squeeze firmly to release and lock it, then pull the rubber hose forcefully to drain the coolant. After the coolant has completely drained, you can either refill with new coolant or flush the system before refilling. Coolant prevents the freezing of the liquid in the cooling system during cold winter parking, which could otherwise crack the radiator or damage the engine block. Its full name is antifreeze coolant. The dimensions of the Volkswagen Lavida are 4670mm in length, 1806mm in width, 1474mm in height, with a wheelbase of 2688mm.
18
3
Share

What is the correct method for measuring engine oil?

The correct method for measuring engine oil is: When checking the oil level, pull out the dipstick, wipe it clean, reinsert it, then pull it out again to check the oil level. If the oil level is between the two marks on the dipstick, it indicates the oil level is normal. Precautions for checking engine oil: 1. Generally, wait for about 15 minutes after turning off the engine to allow the oil to stabilize before checking; 2. When checking the oil level, ensure the vehicle is parked on a level surface to maintain an accurate reading; 3. The first time you pull out the dipstick, wipe it clean, reinsert it, and then pull it out again to check the oil level to ensure an accurate and clear reading. Engine oil, also known as motor oil or engine lubricant, is a substance enhanced with additives in a base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers.
12
2
Share

What is the small gauge below the tachometer on the BMW X1?

The small gauge below the tachometer on the BMW X1 is the fuel consumption gauge, which displays the vehicle's real-time and average fuel consumption. The needle on the fuel consumption gauge fluctuates according to the vehicle speed and driving conditions. The fuel consumption displayed by the onboard computer can only serve as a reference value and does not fully reflect the vehicle's fuel consumption over a certain distance. The BMW X1 has body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. The BMW X1 is equipped with two engines: a 1.5-liter three-cylinder turbocharged engine and a 2.0-liter turbocharged four-cylinder engine. The 1.5-liter three-cylinder turbocharged engine produces 140 horsepower and a maximum torque of 220 Nm, while the 2.0-liter turbocharged four-cylinder engine delivers 192 horsepower and a maximum torque of 280 Nm.
20
0
Share

How to Connect Bluetooth in Mercedes-Benz C180?

The method to connect Bluetooth in Mercedes-Benz C180 is: 1. First, turn on both the mobile phone Bluetooth and the car Bluetooth, and make sure they are in discoverable state; 2. On the Bluetooth interface of the mobile phone, click search for devices, and the mobile phone can search for the car Bluetooth, then connect and pair; 3. Select the car Bluetooth displayed on the mobile phone, click car Bluetooth, Bluetooth settings, and pair. At this time, the mobile phone will pop up a dialog box asking for the pairing code. Enter the pairing code here and click connect, and at the same time, click pair on the car Bluetooth interface to complete the connection. The body dimensions of the Mercedes-Benz C180 are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm.
4
0
Share

What causes the ABS light to illuminate on the car?

When the ABS light illuminates on the car, it indicates a fault in the anti-lock braking system. The function of this system is to automatically control the braking force during vehicle deceleration, preventing wheel lock-up and maintaining a rolling-sliding state to ensure maximum wheel-to-ground adhesion. The ABS light turns yellow due to faults such as wheel speed sensor failure, ABS control unit malfunction, CAN line issues, or related circuit problems. When the ABS yellow light appears, you should check: whether the grounding contact of the ABS hydraulic control device is proper; whether the wiring connectors and sockets of the ABS electronic control unit are properly connected and undamaged; and whether all relays and fuses are intact and securely plugged in.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.