What is the ground clearance of the 2021 Haval H6 third generation?

2 Answers
VanAlina
09/06/25 4:33am
The minimum ground clearance of the 2021 Haval H6 third generation is 180 millimeters. The minimum ground clearance of the Haval H6 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Haval H6, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Haval H6 is a domestic SUV. The length, width, and height of the Haval H6 are 4645 millimeters, 1860 millimeters, and 1720 millimeters respectively, with a wheelbase of 2680 millimeters. Generally, the ground clearance of sedans ranges between 110 millimeters and 150 millimeters, while SUVs have a ground clearance between 200 millimeters and 250 millimeters. However, the ground clearance of the Haval H6 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Haval H6's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferred to avoid scraping or damaging the chassis.
Was this review help?
1
3
Share
RachelLynn
09/18/25 4:29am
The ground clearance of the Haval H6 2021 third-generation is approximately 170mm, based on my personal experience as I've driven my friend's car several times. On urban roads, such as when encountering small puddles or speed bumps, this height is quite suitable, eliminating concerns about the chassis scraping the ground. When taking family trips on rough roads, it performs well, though higher curbs still require caution. Compared to regular sedans, its higher ground clearance enhances off-road capability, providing a greater sense of security, especially during rainy days or countryside outings. Overall, the 170mm design balances comfort and practicality, ensuring smooth daily driving.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the serrated white solid line inside the circle?

It is a variable direction lane marking. Below is the relevant introduction: 1. Introduction to variable direction lane markings: Variable direction lane markings mean that the direction after entering this lane must be determined according to the corresponding lane signal light instructions. Variable direction lanes have flexibility and guidance, which are different from ordinary lane indication lines. Ordinary lanes have markings on the ground indicating the direction. Variable direction lane markings are generally set up in sections with more complex traffic conditions. 2. Specific operation method: If you encounter this type of lane, you should drive according to the instructions of the corresponding lane signal light.
11
4
Share

What is the size of the Wuling Hongguang Mini's front windshield?

The height of the Wuling Hongguang Mini's windshield is no less than 38cm, and the width is no less than 93cm. Here are some related details: 1. Powertrain: The Wuling Hongguang is equipped with two engines, the P-TEC 1.2L and 1.5L-DVVT, both designed and manufactured according to General Motors' global powertrain standards. These engines feature a double overhead camshaft design. 2. Body dimensions: The top-tier model of the Wuling Hongguang has front seats with 8-way adjustable design, offering a fore-aft adjustment range of up to 190mm and a fore-aft movement range of 160mm. The new Wuling Hongguang has a body length of 4420mm, a width of 1685mm, and a height of 1755mm (1770mm with roof rack).
20
0
Share

What is the ground clearance of the Lincoln Nautilus?

The minimum ground clearance of the Lincoln Nautilus is 200 millimeters. The minimum ground clearance of the Lincoln Nautilus refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Lincoln Nautilus improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Lincoln Nautilus is a midsize SUV under Changan Lincoln. The dimensions of the Lincoln Nautilus are 4849×1934×1693mm (length×width×height), with a wheelbase of 2850mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Lincoln Nautilus is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and driving conditions. For urban areas with well-paved roads, a lower ground clearance can enhance stability and comfort. For frequent off-road travel or driving in areas with poor road conditions, a higher ground clearance is advisable to improve off-road performance and avoid damage to the undercarriage.
12
2
Share

Where is the USB port located in the Levin Hybrid?

In the storage compartment in front of the front passenger seat. More information about the Levin Hybrid is as follows: 1. Overview: The Levin Hybrid version is equipped with a hybrid system consisting of a 1.8L Atkinson cycle engine and an electric motor, with the engine's maximum output power being 99 horsepower and the electric motor's maximum output power being 72 horsepower. The combined fuel consumption is 4.2L/100km. 2. Others: The Levin Hybrid is driven solely by the electric motor at low-speed starts, by both the engine and electric motor during normal driving conditions, and by both the engine and electric motor operating at full capacity during full acceleration.
3
1
Share

What are the standard tires for the Audi A6L?

The 2019 Audi A6L comes equipped with three tire sizes, all factory-installed tires are from the Goodyear brand. The tire models are 225/55R18, 245/45R19, and 255/40R20. Goodyear, officially known as The Goodyear Tire & Rubber Company, was founded in 1898 in the United States and has over a century of history. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. Goodyear also specializes in designing and producing matching tires and related equipment for many top international car manufacturers. International automotive brands that use Goodyear tires include Rolls-Royce, Mercedes-Benz, BMW, Audi, Volkswagen, General Motors, Ford, Chrysler, and Lexus, among others. The parameters on the tires have the following meanings: the first number represents the tire's width, the second number represents the aspect ratio, and the third number represents the diameter suitable for the wheel hub. Taking 225/55R18 as an example, these numbers mean: 225 indicates the tire's section width in millimeters, generally ranging between 145—285mm, with intervals of 10mm; 55 is the aspect ratio, which is the ratio of the tire's sidewall height to its section width, representing 55%. Typically, tire aspect ratios range between 30%—80%. Under normal circumstances, ordinary sedans should not use tires with an aspect ratio greater than 75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; R stands for Radial, indicating the tire has a radial structure, and 15 is the wheel hub's outer diameter in inches.
14
5
Share

Is it necessary to remove the old paint for a full car repaint?

Yes, it is necessary. If the original car paint is not treated during a full repaint, the new putty and paint cannot adhere well to the surface, which can easily lead to peeling and bubbling later on, making the entire car look poor. Additionally, if new paint is applied over the old paint, the high pressure from car wash jets can easily cause the new paint to peel off. Additional information: The old paint can have some influence on the color of the new paint. Car paint consists of several layers. The top layer is the clear coat, followed by the base coat, then the primer, and finally the electroplated layer. Methods to remove the old paint typically involve sanding with sandpaper or using asphalt cleaner to dissolve the paint.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.