What is the ground clearance of the 2021 BMW X1?

3 Answers
EmilyLee
07/29/25 1:32pm
The minimum ground clearance of the 2021 BMW X1 is 170 millimeters. The minimum ground clearance of the 2021 BMW X1 refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance generally improves off-road capability, but if the ground clearance of the 2021 BMW X1 is too high, it may reduce stability during high-speed driving. The 2021 BMW X1 is a compact SUV from BMW, with dimensions of 4565 mm in length, 1821 mm in width, and 1620 mm in height, and a wheelbase of 2780 mm. It features a MacPherson strut front suspension and a multi-link rear suspension. The vehicle is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140 PS and a maximum torque of 220 Nm. Generally, sedans have a ground clearance ranging from 110 mm to 150 mm, while SUVs typically have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2021 BMW X1 is not static; it varies depending on the load condition. Therefore, changes in ground clearance should be considered based on the load status of the vehicle. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the intended use of the vehicle and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance may enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to improve off-road performance and avoid underbody scrapes or damage.
Was this review help?
15
3
Share
DeDelaney
08/14/25 4:17am
I understand that the ground clearance standard for the 2021 BMW X1 is approximately 170mm. This height is quite practical for a compact SUV, as it ensures convenience for urban commuting while also being capable of handling light off-road conditions like curbs or waterlogged roads after rain. In terms of design, BMW has balanced comfort and handling—the 170mm clearance keeps the center of gravity from being too high, preventing excessive body roll during turns, yet provides sufficient clearance to avoid scraping the undercarriage. As one of the owners, I find driving over speed bumps or ramps quite effortless with this clearance. The 170mm measurement means fewer worries when navigating uphill parking in residential areas or waterlogged sections on highways. For maintenance, regularly checking tire pressure helps maintain optimal clearance, but the factory settings are already optimized for daily driving needs, making the X1 a versatile choice for family use. Upgrading to larger wheels may slightly adjust the height, but the base 170mm ensures a balanced mix of versatility and safety.
Was this review help?
15
5
Share
Expand All
VanHarper
10/10/25 3:45am
I personally checked that the 2021 BMW X1 has a ground clearance of around 170mm. Driving this SUV in urban and suburban areas is effortless—the high chassis reduces the risk of scraping, and water is less likely to flood the undercarriage when encountering potholes or snowy/rainy roads. During the test drive, I noticed that the 170mm height made entering and exiting steep parking lots much easier, with a commanding view that enhances driving confidence. From a family perspective, the 170mm clearance is child-friendly for outings, reducing bumps for rear-seat passengers on rough roads, while the stability control system works well to prevent body roll. BMW's suspension tuning leans toward comfort, so the 170mm clearance doesn’t compromise driving pleasure—instead, it improves flexibility when handling unexpected road conditions. As a daily commuter, the 170mm setup balances fuel efficiency and practicality, making it a reliable urban adventure companion.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How to Match the Remote Control for Mazda6?

Here are the steps to match the remote control for Mazda6: 1. Open the main door, turn the key on and off 3 times without removing it. 2. Close and open the door 3 times, the door lock will activate, entering the learning state. 3. Press any button on the remote control twice, the door lock will activate. 4. Remove the key, if the door lock activates again, the remote control matching is successful. Notes for configuration are as follows: 1. Matching the Mazda6 remote key requires manual operation; the vehicle does not support computer operation. There are no specific requirements for the key, it can be either original or self-configured. 2. During the matching operation, ensure the other three doors are closed. 3. Each step must be performed continuously without long intervals.
5
0
Share

What Causes the Rattling Noise in the Trunk When Driving on Bumpy Roads?

The causes of rattling noise in the trunk when driving on bumpy roads include: 1. Items in the trunk: Check if there are any items in the trunk that may vibrate, roll, and produce noise during driving; 2. Trunk accessories: Loose trunk accessories such as the tail lock; 3. Chassis: Loose connections in the chassis; 4. Shock absorbers: Damaged shock absorbers causing noise; 5. Items in storage compartments: Usually items in the car's storage compartments, glove box, or the sound of wires from aftermarket electronic devices hitting surfaces. Sometimes, these sounds can be reflected back through the ceiling, making it seem like the noise is coming from the trunk. Generally, the rattling noise is caused by one of the above situations, and specific cases require detailed analysis.
20
5
Share

How Many Driver's Licenses Can One License Plate Number Be Bound To?

One vehicle can be bound to a maximum of 3 non-owner driver's licenses. Here are the relevant details: 1. Number of driver's licenses bound to a vehicle: One driver's license can only be bound to a maximum of 3 other people's vehicles at the same time, and one vehicle can also only be bound to a maximum of 3 other people's driver's licenses at the same time. It should be noted that one person cannot historically accumulate binding to more than 5 other people's vehicles; exceeding this limit will prevent further binding. 2. Binding channels: There are mainly two channels for binding, online and offline. Online, citizens can download the Traffic Management 12123 app and follow the prompts to complete the binding process, with a maximum of 3 non-owner driver's licenses allowed. Offline, they can visit the local traffic police branches with all the necessary documents to complete the binding, also limited to 3 non-owner driver's licenses.
10
2
Share

What type of engine oil is used for the Trumpchi GS7?

The Trumpchi GS7 uses 5W30 engine oil. Below is a brief introduction about the Trumpchi GS7: 1. The Trumpchi GS7 is a new five-seat mid-size SUV under GAC Trumpchi. The body contour of the GS7 continues the square and rugged style of the Trumpchi GS8, with only the roof and rear lines differing slightly from the GS8 starting from the C-pillar, making the rear appear more compact. The design of the front headlights shares similarities with the GS8, showcasing a distinct family-style. 2. Power introduction: It is equipped with an electronic gear shift. In terms of power, the GS7 continues to feature a 2.0T engine, using the same 4B20M1 model as the GS8, and incorporates BorgWarner's low-inertia turbocharger.
10
4
Share

How to set up the automatic folding function for BMW X3 side mirrors?

BMW X3 side mirror automatic folding setup method is as follows: 1. Select "Vehicle" on the center console and press the left button on the MMI. 2. After entering the interface, choose "Vehicle Settings", select "Central Locking", and check "Fold Mirrors". 3. The mirrors will then automatically fold when the car is locked. Below is an introduction about the BMW X3: 1. The new BMW 3 Series long-wheelbase version basically follows the main design of the overseas model, featuring a new floating LCD screen paired with a newly designed electronic gear lever and an M-branded three-spoke multifunction steering wheel. 2. The design style of the new 3 Series features sharp LED headlight clusters connected to enlarged glossy black kidney grilles, complemented by front bumper air intakes and three-dimensional lines.
6
5
Share

How to Lift the Volkswagen Wiper?

Here is the method to lift the Volkswagen wiper: 1. First, turn off the car, but do not remove the key. 2. Press the wiper switch downward once. 3. Then immediately remove the car key. 4. At this point, the wiper will stop at its highest position. 5. Then, you can lift the wiper along its pivot point. Below is a brief introduction about Volkswagen: Volkswagen (German: Volks-Wagenwerk), meaning 'the people's car', has undergone several changes in its logo history. The VW in the logo stands for the first letters of its full name. The logo appears to be composed of three 'V's made with the middle and index fingers, symbolizing the company and its products' victory - victory - victory.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.