What is the ground clearance of the 2021 Audi A6 allroad?

1 Answers
StWilliam
07/30/25 2:24am
The ground clearance of the Audi A6 allroad is 139mm. Here are the relevant details: 1. Exterior: The design follows the family style with more pronounced lines, especially the hexagonal grille, lower bumper, and the lines below the doors, which exude a strong sense of power. Additionally, the design of the headlights and taillights truly lives up to the reputation of 'Light Factory.' At the rear, the new car continues the design of the new Audi A6 Avant, featuring LED taillights that are more slender and refined. It also retains the hidden exhaust design from the sedan version. The dimensions of the new car are 4950mm in length, 1900mm in width, and 1500mm in height, with a wheelbase of 2930mm. 2. Powertrain: The new-generation Audi A6 allroad quattro is equipped with three different power versions of the 3.0T V6 TDI engine, paired with 48V mild hybrid technology. The maximum power outputs are 231 horsepower, 286 horsepower, and 350 horsepower, with peak torques of 500 N·m, 620 N·m, and 700 N·m, respectively. All versions are mated to an eight-speed automatic transmission.
Was this review help?
7
2
Share
More Forum Discussions

How to Clean Suede Leather Seats?

You can use a vacuum cleaner, universal foam cleaner, specialized suede leather cleaner, and professional softener for cleaning. When using a specialized suede leather cleaner, it is necessary to dissolve it in warm water first. Add the cleaner for dilution. After wetting the suede leather seats, start cleaning, and finally use a suede leather grooming brush to tidy up the suede. Place them in a well-lit environment to dry.
12
1
Share

Can a Cracked Rear Bumper Be Repaired?

After a car's rear bumper is cracked, it can be repaired. First, use a plastic welding gun to fix the crack by heating and melting the plastic welding rod and the surface of the film to achieve fusion and bonding. After repairing the crack, apply touch-up paint and then dry it to complete the repair. Here is some information about car bumpers: A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. It acts as a buffer when the car or the driver is subjected to collision forces. Plastic bumpers consist of three parts: the outer panel, cushioning material, and crossbeam.
8
2
Share

How to Clean a Car Engine Bay?

Open the hood, cover the distributor, battery, and brake fluid reservoir with plastic sheets, then rinse the engine with a water gun. Rinse the air intake vents and remove dirt from the engine bay insulation. Use a flannel cloth dipped in water to clean the radiator, cooling fins, and condenser. Carefully wash the engine bay support bars with a water gun, and use an air gun to blow away dust particles inside the bay. Remove the plastic sheets and thoroughly dry all parts of the engine bay with a towel or flannel cloth.
3
4
Share

How to Adjust Car Audio Settings for Optimal Sound?

It is necessary to boost the bass and treble while reducing the mid-range to compensate for the weak reproduction capability of high and low frequencies by the audio equipment. Generally, increasing the mid-range and slightly lowering the treble and bass can achieve good results. Boost the bass and mid-range more, and adjust the left-right and front-rear balance according to personal preference. Set the bass to 80Hz, treble to 12.5K, subwoofer filter to 120Hz, bass Q value to 1.25, and mid-range to 1.5K or 2K.
3
2
Share

How to Reset the Maintenance Light on a Nissan Murano?

Here are the specific steps to reset the maintenance light on a Nissan Murano: 1. Insert the key, but do not turn it. 2. Press and hold the trip odometer reset button for 5-10 seconds, then turn the ignition to the "ON" position. 3. After another 5-10 seconds, start the engine. Keep holding the reset button throughout this process. 4. If the wrench indicator does not disappear, repeat the procedure several times. 5. Note that maintenance intervals vary by manufacturer and model. Refer to your vehicle's owner's manual for the correct maintenance schedule. After servicing, technicians can reset the maintenance light using the proper procedure.
1
2
Share

How to Handle Vehicle Ownership Transfer Procedures?

Fill out one copy of the Motor Vehicle Alteration, Transfer, Modification, Suspension, or Scrapping Approval Form. Affix the same seal as the original registration, and private vehicle owners must present their ID card for verification. Proceed to the Vehicle Management Section of the Traffic Police Brigade and submit the documents for review by the registration acceptance officer. Vehicles meeting the transfer conditions will be sent to the motor vehicle inspection station for examination and confirmation. After successful review, pay the taxes according to regulations.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.