What is the ground clearance of the 2019 CR-V?
3 Answers
19 CR-V has a minimum ground clearance of 193 millimeters. The minimum ground clearance of the CR-V refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the CR-V means better off-road capability, but if the ground clearance is too high, the stability at high speeds will decrease. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. It is equipped with Michelin Latitude series SUV tires and comes with two engine options: a recalibrated 2.0L and 2.4L. The dimensions of the CR-V are 4585 mm in length, 1855 mm in width, and 1679 mm in height, with a wheelbase of 2660 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the CR-V is not static; it also depends on the load condition. Therefore, changes in the CR-V's load should be considered when evaluating ground clearance. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is preferable to avoid scraping or damaging the undercarriage.
My car is a 2019 CR-V with a ground clearance of 198mm, which is really friendly for daily driving. My family often drives in the city, and when encountering construction potholes or water accumulation after rain, the high ground clearance ensures no worries about scraping the undercarriage, making it much smoother over speed bumps. For trips to the suburbs or rural roads, this height improves off-road capability, handling muddy or snowy slopes with ease. When modifying tires or rims, avoid choosing overly wide sizes, as this could disrupt the factory-designed balance. It’s recommended to regularly inspect the suspension system for any damage, as maintaining stable clearance can extend the vehicle’s lifespan. During maintenance, check the tire pressure to ensure it’s at the correct level, as underinflation can reduce the actual ground clearance and increase fuel consumption. In short, the 198mm design is quite reasonable, adapting well to most road conditions—just avoid unnecessary modifications.
I remember the 2019 CR-V's ground clearance is 198mm, which has been a great help as an owner. Driving in the city, I don't have to be overly cautious when encountering curbs or sunken manhole covers—the high chassis protects the car from damage. During the rainy season, even with deep water accumulation, driving through feels stable without water entering. For suburban trips with light off-roading, like gravel roads or slopes, the CR-V's passing ability is much better than sedans. I recommend beginners pay attention to tire wear, as severe wear can reduce the actual clearance. Regular maintenance and adjusting tire pressure to standard values are essential. Additionally, heavy loads can slightly reduce the height, so avoid overloading to maintain safe driving. This parameter in the CR-V optimizes both comfort and practicality—don't overlook it.
