What is the ground clearance of the 2019 CR-V?

2 Answers
OMaverick
07/24/25 8:13am
2019 CR-V has a minimum ground clearance of 135mm. Here is some related information about the 2019 CR-V: 1. Specifications of the 2019 CR-V: The 2019 CR-V is a classic urban SUV model produced by Dongfeng Honda. It is equipped with Michelin Latitude series SUV tires and comes with two re-tuned engines: 2.0L and 2.4L. The 2.0L dual overhead camshaft i-VTEC engine delivers a maximum power of 110 kW and a maximum torque of 190 Nm. In terms of safety, the CR-V features SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pretensioners and load limiters. 2. Body dimensions of the 2019 CR-V: The 2019 CR-V measures 4630mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2620mm.
Was this review help?
16
0
Share
LillianDella
08/11/25 3:48am
The 2019 Honda CR-V has a ground clearance of approximately 198 mm, which is about 7.8 inches. As a commuter who frequently drives this car, I value this detail. A higher ground clearance means I don't have to worry about scraping the chassis when going over speed bumps in the city, and it handles flooded roads easily during rainy days, preventing water from reaching the engine. When traveling with a full load of family members, it feels stable on rural dirt roads, reducing the risk of slipping or getting stuck, and the visibility is also better. However, don't assume bigger is always better—too high a clearance might make the car less stable when turning and slightly increase fuel consumption. Regularly checking tire pressure is crucial, as insufficient pressure can reduce the actual height and affect off-road capability. I recommend checking the road surface before driving and slowing down when encountering deep potholes to protect the suspension and body. This car is well-balanced in design, making it suitable for daily family use.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Cruze 1.6 automatic transmission?

The official fuel consumption of the Cruze 1.6 automatic transmission is 7.1L/100km. Here are some related introductions about fuel consumption: 1. Habits and road conditions: Fuel consumption is greatly affected by driving habits and road conditions. Avoid hard acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator pedal heavily when starting, as this can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Braking: Maintaining a safe distance and avoiding frequent braking can save more fuel. If you don't keep a safe distance, you may need to brake frequently on the road. When braking, the gear of an automatic transmission vehicle will drop, and the vehicle will have to accelerate again from a lower gear. Starting from a standstill or a low gear requires the engine to consume more fuel.
11
4
Share

Does the Volkswagen T-Roc have a convertible version?

Volkswagen T-Roc has a convertible version. Built on Volkswagen's latest MQB platform, it features a two-door body structure paired with a 2+2 seating layout. Exterior: The exterior of the new car does not differ much from the standard version, with the wheelbase slightly increased by 37mm. It also comes equipped with a black canvas top, giving it a very stylish look. It is reported that the soft top of the T-Roc convertible can be opened or closed in just 12 seconds. Additionally, if the vehicle shows a tendency to roll over, roll bars near the rear headrests will deploy within 1 second to ensure the safety of the passengers. Powertrain: In terms of powertrain, the car is equipped with a 1.5T engine, paired with a 7-speed dual-clutch transmission, delivering a maximum output power of 110kW and a peak torque of 250Nm.
17
3
Share

Why is the Emgrand audio system not working?

Emgrand audio system not working causes and solutions are as follows: Speaker wiring fault: Faulty speaker wiring inside the door can result in no sound from the rear speakers when the audio system is turned on. The repair technician can identify the malfunctioning speaker by sound, remove the door trim panel to check for loose speaker wiring connections, and use a multimeter to test the continuity of the speaker wiring to determine if there is a fault. Repairing the speaker wiring will resolve the issue. If the vehicle is under warranty, this can be addressed for free at a 4S shop. Speaker damage: In new vehicles, the speaker diaphragm is relatively stiff, and setting the speaker volume too high can easily cause diaphragm rupture, leading to abnormal speaker sound. The repair technician can identify the malfunctioning speaker by sound and will need to replace the speaker. If the vehicle is under warranty, the speaker can be replaced for free at a 4S shop.
19
2
Share

Can a Dash Cam Be Used Without a Memory Card?

A dash cam typically cannot record videos without a memory card, though some models come with built-in storage. Therefore, it's important to carefully check the specifications when purchasing a dash cam. It is recommended to use a dash cam with an external memory card for easier video downloading when needed. The memory cards used in dash cams are usually TF or SD types. TF cards are small and primarily used in mobile phones, while SD cards are larger and commonly found in digital cameras and other portable devices. A dash cam is a device that records images, sounds, and other relevant data during vehicle travel. Once installed, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents. Dash cams are mainly divided into two categories: portable dash cams and aftermarket in-dash DVD dash cams. Portable dash cams can be further classified into rearview mirror dash cams and data dash cams, which are known for their discreet appearance, easy installation, removable and replaceable features, and simple operation.
15
1
Share

Where is the spark plug located on the Baojun 310?

The location of the spark plug on the Baojun 510: Spark plugs are installed on the side or top of the engine. In early models, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have been modified to have the ignition coils directly connected to the spark plugs. How spark plugs work: The ground electrode of a spark plug is connected to the metal shell, which is then attached to the engine block via threads on the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.
5
3
Share

What lights to use when approaching an intersection?

When driving straight through an intersection with traffic signals, use low beam headlights. When approaching an intersection without traffic signals, alternately switch between high and low beams at least twice, slow down in advance, and pay close attention to the traffic ahead. Here are specific details: 1. When overtaking: At night, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not advisable to overtake with the turn signal on, as this may catch the following vehicle off guard. 2. When changing lanes: To prevent the vehicle ahead from changing lanes while overtaking, try to alert them by honking or quickly switching between high and low beams. Observe the vehicle ahead; if there is no intention to change lanes, you can accelerate to overtake. If the vehicle ahead turns on the left turn signal, it indicates an emergency situation ahead, making it not an ideal time to overtake, as the vehicle may also need to change lanes.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.