What is the ground clearance of the 11th generation Honda Civic?

1 Answers
AnnaLee
07/23/25 11:15pm
The minimum ground clearance of the 10th generation Honda Civic 1.0T model is 110mm, while the 1.5T model has a minimum ground clearance of 105mm. Characteristics of high ground clearance: Commonly seen SUVs and off-road vehicles have higher ground clearance, which provides strong off-road capability and reduces concerns about scraping the chassis. However, higher ground clearance also results in poorer vibration damping, making the ride comfort inferior to that of sedans. Additionally, higher ground clearance raises the center of gravity, reducing body stability, especially during cornering where side tilt can be more pronounced, thus requiring lower speed limits. Characteristics of low ground clearance: Lower ground clearance reduces the center of gravity, improving tire grip and benefiting vehicle acceleration. It also reduces air resistance and minimizes power loss, allowing the car's performance to be fully utilized—this is why performance cars typically have very low ground clearance. However, low ground clearance results in poorer road adaptability, requiring the vehicle to operate on very smooth roads.
Was this review help?
5
2
Share
More Forum Discussions

What are the exterior dimensions of the Jeep Grand Commander?

Length is 4873mm, width is 1892mm, height is 1738mm, and wheelbase is 2800mm. Here are the details of the Jeep Grand Commander: 1. It adopts Jeep's latest design language, with a front fascia resembling the newly released overseas version of the Cherokee, and the square-shaped front and body create a majestic and solid visual effect. 2. Interior layout: Offers both 5-seater and 7-seater versions, with the 7-seater version featuring a 2+3+2 seating arrangement. 3. Tire specifications: The tires are sized 235/60R18 and 235/55R19, and the large multi-spoke wheels enhance the vehicle's robust appearance. 4. Powertrain: Both the 5-seater and 7-seater models are equipped with two tuned versions of a 2.0T gasoline engine.
16
5
Share

Should the GM8 use 92 or 95 gasoline?

GM8 should use 92-octane gasoline, as this fuel grade is recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, the GM8's fuel cap will also indicate the recommended grade. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is even higher, 98-octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the GM8 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using a higher grade will not cause damage, but the increased octane number alters the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using a lower grade can cause engine knocking. The significantly lower octane number lowers the fuel's ignition point, causing premature ignition during the compression stroke. If detonation occurs before the spark plug fires, resistance is generated during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in extreme cases.
14
3
Share

What is the displacement of the Volvo XC60?

The displacement of the Volvo XC60 is 1968ml, which is a 2.0-liter engine. Below are the details of the Volvo XC60: 1. Dimensions: The length, width, and height are 4688/1902/1658mm respectively, with a wheelbase of 2865mm. 2. Colors: It includes up to 8 body colors such as Crystal White Pearl, Brown Metallic, Magic Night Silver Metallic, Onyx Black Metallic, and also offers 5 wheel rim styles. 3. Powertrain: The Volvo XC60 has three powertrain options, including the T4/T5 models equipped with low-power/high-power turbocharged engines and the T8 plug-in hybrid model.
1
3
Share

What is the replacement interval for tire valves?

Rubber tire valves have a lifespan of 3-4 years, while metal tire valves last two to three times longer than rubber ones. Over time, modified tire valves may develop air leaks. Below are the steps for replacing tire valves: 1. Before installation, clean any debris from the valve hole on the wheel rim and polish it smooth. 2. Cut out a section of the old inner tube containing the valve stem, making a circular cut with a 2 cm radius around the valve. 3. Use two rubber rings of the same size - install one on the valve stem before mounting it to the wheel rim, and install the other on the outer side of the wheel rim's valve stem. Then install the valve nut, and you may apply some sealant around the valve stem.
7
0
Share

What is the displacement of the Hyundai Fista?

Modern Fista's displacement is 1.4 liters or 1.6 liters. The following is the relevant content: Engine used in Fista: The Fista uses two engines in total, one is a 1.4-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. Fista power: The Fista's 1.4-liter turbocharged engine has 140 horsepower and a maximum torque of 242 Nm, with a maximum power speed of 6000 rpm and a maximum torque speed of 1500 to 3200 rpm, matched with a 7-speed dual-clutch transmission. The 1.6-liter turbocharged engine has 204 horsepower and a maximum torque of 265 Nm, with a maximum power speed of 6000 rpm and a maximum torque speed of 1500 to 4500 rpm, matched with a 7-speed dual-clutch transmission.
17
1
Share

Where is the thermostat located on the Wuling Rongguang?

The thermostat of the Wuling Rongguang is installed below the engine, between the oil filter and the exhaust manifold. Here are the specific operation steps: 1. From the left front door, lift the driver's seat floorboard to reveal a relatively thick water pipe. 2. At the engine-side root of this water pipe is the thermostat housing, which contains the thermostat. Below is a detailed introduction to the function of the Wuling Rongguang thermostat: 1. The thermostat is used to regulate the engine cooling system's large and small circulation loops. 2. It remains closed when the engine temperature is low, circulating coolant only through the small radiator. 3. It opens when the water temperature reaches approximately 70°C, allowing coolant circulation through the vehicle's main radiator.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.