What is the ground clearance of Santana and Jetta?

Does turning on the air conditioning when the car is turned off affect the car?

Turning on the air conditioning when the car is turned off does have an impact on the vehicle. Not turning off the air conditioning before shutting down the engine can cause the car to start with the air conditioning compressor running the next time it is turned on, increasing the load and potentially causing long-term damage to the engine. Leaving the air conditioning on when the engine is off means the compressor will start together with the engine during the next ignition, placing additional strain on the motor. Generally, it is not advisable to turn on the air conditioning when the engine is cold, as it can harm the engine. Correct usage of car air conditioning: Turn off the air conditioning a few minutes before reaching your destination while keeping the blower running to evaporate moisture from the condenser, ensuring the relative dryness of the air conditioning system. This helps reduce bacterial growth and odor formation. The air conditioning should also be turned on only after the engine has started. During daily use of the air conditioning, even though there is an air filter, a small amount of dust can still enter the ducts. If the air conditioning is consistently used at low fan speeds, dirt can accumulate inside, leading to odors over time and affecting health. In hot weather, it is best to start by opening the external circulation, lowering all windows, driving for a few minutes before closing the windows, and then switching back to internal circulation. This method ensures the fastest temperature drop.

10

5

Share

How to Set Up the Double Flash When Locking the 8th Generation Accord?

To perform light operations, first ensure the vehicle is in the ignition-on state. Rotate the light control lever to turn on the corresponding lights. After pushing the control lever downward, the left turn signal will activate. After lifting the control lever upward, the right turn signal will activate. Gently move the light lever, and the corresponding turn signal will flash three times before automatically turning off.

17

1

Share

What does 'Pull, Remove, Return, Turn off, Hang' mean?

The meaning of 'Pull, Remove, Return, Turn off, Hang' is to pull the handbrake, remove the gear, return the turn signal, turn off the engine, and hang the first gear. During the driving process, the driver needs to issue necessary sound signals according to requirements and regulations to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. It is also used to urge movement and convey signals. Below are some driving precautions: 1. Check the rearview mirror: When turning or changing lanes, you must use the turn signal and slow down. Always check the rearview mirror before turning. For a left turn, mainly check the left rearview mirror; for a right turn, mainly check the right rearview mirror. Both left and right turns require checking the interior rearview mirror. 2. Don't stare at the front of the car: When driving on a clear road, look straight ahead at 100 meters and avoid staring at the immediate front of the car. 3. Press the clutch: Generally, when decelerating at speeds above 40 km/h, there's no need to press the clutch first; wait until the speed reduces to about 20 km/h before pressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.

15

3

Share

Can You Still Drive If One Fuel Injector Is Broken?

You cannot continue driving if a fuel injector is broken. If a fuel injector is broken, it is recommended to stop the car immediately for inspection or find the nearest repair shop or 4S store for maintenance. Causes of fuel injector damage: Mainly include fuel injector clogging, broken injector spring, excessive wear of the injector needle, etc. If the fuel injector problem is due to clogging, it can be directly cleaned. If the fuel injector problem is due to part damage, it can be removed and inspected and repaired by professionals. If necessary, a new fuel injector can be directly replaced. When a car's fuel injector fails, take the following measures: Clean with professional fuel injector cleaner: The most common form of fuel injector failure is clogging. Simply add professional fuel injector cleaner and let the engine idle for more than ten minutes, and the sludge and other impurities in the injector will be effectively cleaned. Remove the fuel injector for cleaning: Although removing the fuel injector for cleaning is more troublesome, the cleaning is more thorough. Replace the fuel injector: Directly replacing a new fuel injector is simple and hassle-free.

17

2

Share

Where is the VIN located on a Ford Explorer?

Ford Explorer's VIN is located on the frame rail under the passenger seat. Here is more information about VIN: 1. A vehicle's VIN consists of 17 characters, with each car having a unique VIN that reflects the country of manufacture, vehicle specifications, etc. The commonly used North American standard is quite strict and also compatible with the EU's ISO3799 standard. The VIN, also known as the Vehicle Identification Number, is composed of letters and numbers and serves as the vehicle's ID. 2. The first three digits indicate the manufacturer, brand, and type of the vehicle. The first digit represents the country/region of manufacture, the second digit represents the manufacturer, and the third digit represents the vehicle type. 3. Digits four to eight provide detailed information about the vehicle category, engine type, rated weight, etc. 4. The ninth digit is a check digit, which is the same for all brands. 5. The tenth digit indicates the model year of the vehicle. For example, 2001 is represented by 1, 2002 by 2, and after 9, it starts with the letter A until Z, then repeats. 6. The eleventh digit represents the assembly plant where the vehicle was manufactured. 7. The last six digits are the vehicle's production serial number.

17

4

Share

What does the Buick Verano 15s mean?

Buick Verano 15 represents a 1.5L naturally aspirated engine, and the S stands for a high-power direct-injection engine, which is part of Buick's new model naming convention. Here is an introduction to the Buick Verano: 1. The 2019 Buick Verano maintains the same exterior and interior design as the 2018 model, with upgrades primarily focused on configurations. 2. The new Buick Verano is equipped with two engine options: a 1.5L L4 naturally aspirated engine and a 1.5T L4 turbocharged engine. 3. The 1.5L version has a maximum horsepower of 118 PS, a maximum power of 87 kW at 6600 rpm, a maximum torque of 146 Nm at 4000 rpm, and is paired with a 6-speed automatic transmission. The official 0-100 km/h acceleration time is 12.8 seconds. The 1.5T version has a maximum horsepower of 169 PS, a maximum power of 124 kW at 5600 rpm, a maximum torque of 250 Nm between 1700-4400 rpm, and is paired with a 7-speed dual-clutch transmission. The official 0-100 km/h acceleration time is 8.8 seconds. 4. The entire lineup features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam with Watt's linkage non-independent suspension.

16

2

Share

What is the ground clearance of Santana and Jetta?

Does turning on the air conditioning when the car is turned off affect the car?

How to Set Up the Double Flash When Locking the 8th Generation Accord?

What does 'Pull, Remove, Return, Turn off, Hang' mean?

Can You Still Drive If One Fuel Injector Is Broken?

Where is the VIN located on a Ford Explorer?

What does the Buick Verano 15s mean?

Does the EA211-DJS Engine Burn Oil?

Do Car Tires with Cracks Need to Be Replaced?

Are Mechanical Keys Made of Iron?

What to Learn on the First Day of Driving Practice?