What is the ground clearance height of the BMW 3 Series?

1 Answers
DiMiles
07/30/25 5:08am
BMW 3 Series ground clearance height is 160mm. The minimum ground clearance of the BMW 3 Series refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as stones and stumps without collision. If the BMW 3 Series has higher ground clearance, its off-road capability improves, but if the ground clearance is too high, the stability at high speeds will decrease. The BMW 3 Series is a new-generation sedan product from BMW Group, with a body weight of 1465 kg and an inline 4-cylinder gasoline engine. The BMW 3 Series has a length of 4829mm, a width of 1827mm, and a wheelbase of 2961mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the BMW 3 Series is not static; this data also depends on the load condition, so changes in ground clearance should be considered based on the BMW 3 Series' load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or regions with poor road conditions, considering the vehicle's off-road performance, a higher ground clearance may be preferable to avoid underbody scrapes or damage.
Was this review help?
14
0
Share
More Forum Discussions

What are the symptoms of a faulty BYD F3 exhaust valve?

Here are the symptoms of a damaged exhaust valve in the BYD F3: 1. When the exhaust valve is damaged, it cannot control the amount of exhaust gas recirculation. Excessive exhaust gas participating in recirculation will affect the ignition and performance of the air-fuel mixture, thereby affecting the engine's power, especially during idle, low speed, light load, and when the engine is cold. The recirculated exhaust gas will significantly impact engine performance. 2. A damaged exhaust valve can cause the car to burn oil, resulting in severe blue smoke from the exhaust. This is because the exhaust valve also functions as an oil-gas separator. When working properly, it only draws in exhaust gas and not oil. If the exhaust valve is damaged and loses its oil-gas separation function, it will draw in oil along with the exhaust gas, allowing oil to enter the intake manifold and combustion chamber, causing oil burning and severe blue smoke from the exhaust.
1
0
Share

How to Remove the Rear Seats of a Passat?

Passat rear seat folding and removal steps are as follows: 1. Locate the back of the rear seats, where there are three square holes below the rear windshield. 2. Open the cover of the middle square hole. 3. Insert an object about the length of a key into the hole. 4. Move the object horizontally to the right to shift the internal mechanism to the right side. 5. Fold down the seat. Below is an extended introduction: 1. Split-folding rear seats refer to the backrests of the rear seats that can be folded down in proportions. Compared to folding the entire rear seat, split-folding offers higher flexibility, allowing only half of the backrest to be folded down to accommodate large items while the remaining part can still seat passengers. 2. Full-folding rear seats mean the backrest of the rear seat is a single unit. When more space is needed for larger items, the backrest of the rear seat can be folded down to gain additional space. The drawback of full-folding rear seats is that when the rear seat is folded down, it cannot seat passengers.
5
3
Share

Where is the automatic headlight switch located?

There is a knob on an automatic transmission car, which has symbols for hazard lights, high beams, low beams, and an AUTO marking indicating automatic headlights. Rotating the indicator to AUTO turns on the automatic headlights, which will automatically activate when it gets dark. Here is some information about automatic headlights: 1. Automatic headlights are a feature installed by some car manufacturers for the convenience of drivers, where a light-sensing control system is fitted to the car's front headlights, enabling them to automatically turn on or off. 2. When the light-sensing control system detects that the external light intensity is above a certain level, the car's headlights automatically turn off; when it senses that the external light intensity is below a certain level, the car's headlights automatically turn on.
19
5
Share

How to adjust the time on a Sagitar car?

Sagitar's time adjustment method is: Without starting the engine, turn on the car's power supply, press and hold the left button on the instrument panel, release it when the hour display starts blinking, and use the right button to adjust. After setting the hour, press the left button once to adjust the minutes. Once adjusted, turn off the power supply. Below are some related introductions about the Sagitar: 1. The Sagitar adopts the MQB-A2 platform, featuring the latest design language of this platform and higher configuration performance. 2. The Sagitar's exterior maintains a stable and simple appearance, using many straight and bold lines for detailing, such as the hexagonal front grille combined with horizontal chrome strips. The side profile features a clean waistline, with layered detailing in the side waistline, hood muscle lines, and rear lines, creating an overall sense of power. 3. Except for the Fashion trim, all Sagitar models come with fatigue driving alert, knee airbags, cruise control, leather steering wheel, front lumbar support adjustment, and standard rear radar and LED lighting.
6
1
Share

What is the tire size of the JAC Refine S3?

The front and rear tire specifications for the JAC Refine S3 are 205/55-R16. Below is relevant information about tires: 1. The main functions of tires include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load-bearing capacity, handling performance, average wear, and mileage. 2. The cross-sectional structure of a tire can generally be divided into four parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the wheel rim to create a seal. 3. The interior of a tire is composed of multiple layers of different materials, including the tread pattern, overlay, steel belt, stress-absorbing rubber strip, carcass ply layer, and inner liner.
7
1
Share

What to do if a piece of paint is scraped off the car door?

Methods to deal with scraped paint on a car: 1. If the car is only superficially scratched and the affected area is relatively small, you can use automotive compound to apply and wipe it. 2. If the affected area is larger and you are not familiar with using automotive compound, you can go to an auto beauty shop for repair. The basic methods for repairing paint scratches are: 1. Minor scratches: Emergency products include fine wax and coarse wax. For minor scratches on the surface layer of the paint, complete repair can be achieved through waxing. 2. Scratches that have not penetrated the primer: Emergency products include fine wax and touch-up paint pens. For slightly larger scratches, a touch-up paint pen can be used as a temporary solution.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.