···
Log in / Register

What is the general slope of a car ramp?

3 Answers
MacAlexander
07/29/25 10:13pm
The slope of a car ramp generally does not exceed 15%. Below is relevant information about car ramp slopes: 1. Straight ramp: The ramp width should not be less than 1200, with a slope not exceeding 1:12. 2. Double return ramp: The ramp width is 1200, with a slope of 1:12, and the depth of the starting point, ending point, and rest platform is 1500. 3. L-shaped ramp: The ramp width is 1200, with a slope less than 1:12, and the depth of the starting point, ending point, and rest platform is 1500. 4. Slopes greater than 10%: When the slope exceeds 10%, gentle slopes should be set at both the upper and lower ends of the ramp. The horizontal length of the straight gentle slope section should not be less than 3.6m, and the gentle slope gradient should be half of the ramp slope. The horizontal length of the curved gentle slope section should not be less than 2.4m, with a curve radius not less than 20m, and the midpoint of the gentle slope section should be the original starting or ending point of the ramp.
Was this review help?
16
1
Share
SanMaci
08/15/25 10:31pm
In the design of ordinary parking lots, the slope of car ramps is typically controlled between 10% and 12%. This ensures safe vehicle access while minimizing wear. A slope that's too steep can cause slipping or difficulty climbing, especially during rain or on steep inclines; one that's too shallow may compromise space utilization. I've noticed underground garages often have gentler slopes, around 8%, while outdoor ramps generally don't exceed 15%. These designs are based on safety standards and vehicle compatibility. If you're constructing a ramp, consulting regulations is advised to avoid accidents from improper modifications, as incorrect slopes can affect braking distance and handling.
Was this review help?
3
1
Share
Expand All
StLuke
10/17/25 8:18am
As a seasoned driver who navigates city streets daily, I'm quite familiar with garage and ramp gradients. They're usually just over 10%, not too steep. Steeper slopes make reversing prone to scraping the undercarriage or rolling back, especially when fully loaded; gentler slopes are more beginner-friendly, making ascent and descent easier. Many large shopping mall underground entrances have gradients around 12%, where you feel slightly tilted but still safe. Remember that ramp length also matters – short steep slopes and long gentle slopes each have pros and cons. It's best to choose parking spots with moderate gradients to reduce engine and brake strain.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

Where is the cruise control on the Audi A3?

Audi A3's cruise control system is located on the right-hand control stalk of the steering wheel. However, cruise control is not standard equipment on the Audi A3; it requires an optional package if you want this feature. The Audi A3 is equipped with two engines: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine, paired with a 7-speed dual-clutch transmission. The Audi A3 is a compact car under the Audi brand, available in both hatchback and sedan versions. The front suspension of the Audi A3 uses MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The car's dimensions are 4292mm in length, 1765mm in width, and 1423mm in height, with a wheelbase of 2578mm.
15
5
Share

What is the emission standard of the 2018 Sagitar?

The 2018 Sagitar complies with the China 5 emission standard, while the 2019 all-new Sagitar meets the China 6 emission standard. The China 5 emission standard is the fifth phase of national motor vehicle pollutant emission regulations, which reduces nitrogen oxide and particulate emissions by 25% and 80% respectively, resulting in an overall emission reduction of 10% to 15% for China 5 vehicles and effectively lowering automobile pollutant emissions. The 2018 Sagitar is equipped with various features including a keyless entry system, one-button start system, cruise control, touchscreen with navigation, Bluetooth, dual-zone automatic climate control, heated seats, electronic stability control, hill start assist, fatigue reminder, tire pressure monitoring, and a simulated visual parking system. The vehicle measures 4655mm in length, 1780mm in width, and 1453mm in height, with a wheelbase of 2651mm.
7
1
Share

What is the fuel tank capacity of the 2019 Audi A4L?

The fuel tank capacity of the 2019 Audi A4L is approximately 56 liters, while the top-tier quattro version has a 58-liter tank. Fuel tank capacity is a measure of a vehicle's ability to carry fuel. A larger tank means more fuel can be stored, resulting in longer driving range and reduced need for frequent refueling. With a bigger tank, drivers in areas with sparse gas station coverage can reach more distant stations when running low on fuel, avoiding the risk of running out of gas. The 2019 Audi A4L is equipped with four engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, a medium-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. The Audi A4L is positioned as a mid-size sedan, with dimensions of 4761mm in length, 1826mm in width, 1439mm in height, and a wheelbase of 2869mm.
10
2
Share

What are the differences between the Porsche Cayenne Coupe and Macan?

There are differences between the Porsche Cayenne Coupe and Macan in terms of body dimensions, wheelbase, and other aspects. The details are as follows: Different body dimensions: The length, width, and height of the Porsche Cayenne Coupe are 4681mm, 1923mm, and 1624mm respectively; the Macan measures 4696mm, 1923mm, and 1624mm in length, width, and height. Different wheelbase: The wheelbase of the Porsche Cayenne Coupe is 2807mm; the Macan also has a wheelbase of 2807mm. Different powertrains: The Porsche Cayenne Coupe is equipped with 1.8T and 2.0T turbocharged engines, paired with an 8-speed automatic transmission; the Macan comes with 2.0T, 2.9T, and 3.0T engines, matched with a 7-speed dual-clutch transmission.
12
2
Share

What is the horsepower of the Porsche 718?

The 2019 Porsche 718 model equipped with a 2.0-liter turbocharged engine has 300 horsepower, while the 2018 model with a 2.5-liter turbocharged engine delivers 366 horsepower. The Porsche 718 utilizes two types of engines: a 2.0-liter turbocharged engine and a 2.5-liter turbocharged engine. The 2.0-liter turbocharged engine produces 300 horsepower and a maximum torque of 380 Nm, with a maximum power output at 6,500 rpm and peak torque available between 2,050 to 4,500 rpm. It is paired with a 7-speed dual-clutch transmission. The 2.5-liter turbocharged engine generates 366 horsepower and a maximum torque of 430 Nm, achieving its maximum power at 6,500 rpm and peak torque between 1,900 to 5,000 rpm. This engine is also mated to a 7-speed dual-clutch transmission. The Porsche 718 has body dimensions of 4,379 mm in length, 1,801 mm in width, and 1,276 mm in height, with a wheelbase of 2,475 mm.
3
3
Share

Can I Replace Just One Tire at a Time?

If the tread wear on the car tire is relatively shallow, you can replace just one tire, as the wear on tires on the same axle is usually similar. However, it is essential to ensure that the tires on the same axle have identical tread patterns, structures, brands, and specifications. Here are some relevant details: 1. Severe Wear: If the tire tread is significantly worn, and the tires have been driven tens of thousands of miles but do not yet require replacement, yet one tire is problematic, replacing just one tire can greatly impact driving safety. This may cause the vehicle to pull to one side or even lose control. 2. Hazards of Severe Wear: Because the old tire is severely worn, the new tire will have greater friction and grip compared to the old one. If only one tire is replaced, the difference in grip strength can cause the vehicle to pull to one side or lose control. Additionally, the vehicle may tilt to one side, leading to bumpiness or pulling issues at higher speeds. Therefore, in such cases, it is best to replace a pair of tires. 3. Tire Replacement Position: The position where the new tire is installed also matters. Generally, it should be placed on the drive wheels. For front-wheel-drive vehicles, the new tire should go on the front wheels, while for rear-wheel-drive vehicles, it should go on the rear wheels. In front-wheel-drive cars, the front wheels serve as both steering and drive wheels, requiring strong grip during sudden braking, so the new tire should be placed on the front wheels. For rear-wheel-drive cars, the rear wheels are prone to slipping, as power is concentrated there. If the rear tires are too worn, their grip weakens, so the new tire should be placed on the rear wheels to prevent rollovers.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.