What is the general size of a car cup holder?

2 Answers
Crystal
07/29/25 5:48am
Around 7CM to 8CM. There is no exact standard size for car cup holders as dimensions vary between different brands and vehicle models. Here's relevant information: Domestic car brands include: Wuling, Baojun, Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc. International car brands include: Toyota, Volkswagen, Audi, Mercedes-Benz, Hyundai, Kia, Peugeot, Cadillac, etc. How to remove the cup holder beside the handbrake: If it's integrated with the center armrest, the entire center armrest needs to be removed. If not connected, it can be directly detached.
Was this review help?
19
4
Share
McZoey
08/12/25 9:20am
As someone who loves driving and road trips, I often drink water in the car, so I have quite a bit of experience with cup holder sizes. Generally, the diameter of a sedan's cup holder is around 7 to 9 centimeters, with a depth of about 10 to 15 centimeters, which can just fit a 500ml water bottle. However, SUVs or off-road vehicles often have larger holders, sometimes over 10 centimeters wide and more than 15 centimeters deep, making them suitable for large coffee cups or sports water bottles. When I last changed cars, I brought my water bottle to test it out—too big and it wobbles, too small and it tips over, making a mess in the car. There are notable differences between brands; for example, Honda tends to be standard, while Ford's are a bit wider. If you usually use large bottles, I recommend choosing a model with adjustable cup holders to accommodate different sizes. Also, remember to check the rear cup holder size—it’s more practical for long trips, not just the front ones. The design focuses on practicality, but the safest bet is to test it with your own bottle before buying, so you don’t run into issues halfway through your drive.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Where is the drainage hole located under the door of the Peugeot 3008?

The drainage hole under the door of the Peugeot 3008 is located beneath the door seal at the bottom of the door panel. Here are the specific details: 1. Introduction to the drainage hole: The drainage hole is primarily designed to drain rainwater that seeps into the door interior from the gaps around the windows. Vehicle drainage holes are outlets that allow accumulated water to drain out of the vehicle during rainy weather, and their principle and structure are very simple. 2. Distribution of drainage holes: The drainage holes in a car are generally located in areas such as the fuel tank cap, engine compartment, under the door panels, and sunroof. The most prone areas for clogging are the sunroof and engine compartment. The initial clogging of the sunroof drainage hole occurs at the entrance of the hole, which can be seen by opening the sunroof. At this stage, it is relatively easy to clean and can be done by oneself. Over time, the clog may move into the drainage hose, making it more difficult to unclog as it progresses further along the hose.
4
3
Share

Can Only the Car Light Cover Be Replaced If It's Broken?

It is not possible to replace only the light cover. If the car headlight cover is broken, the entire headlight assembly must be completely replaced. You cannot just replace the light shell, and there are no separate light covers available for sale. If the headlight assembly is not replaced, it may lead to water ingress, which can affect the brightness of the vehicle's lights, cause short circuits in the lights, and damage the electrical circuits. Additionally, it can lead to traffic accidents while driving. Below is relevant information about car light covers: 1. Material of Car Light Covers: The glass covers of vehicle headlights and taillights are made of high-grade polycarbonate (also known as PC, the same material used for resin eyeglass lenses) through injection molding. Polycarbonate is known for its high hardness, strength, toughness, UV resistance, and good light transmission. 2. Characteristics of High-Quality vs. Low-Quality Light Covers: High-quality bulbs have good light distribution and high brightness, whereas low-quality bulbs lack sufficient brightness, have poor focus, and short projection distance. When overtaking, low-quality bulbs can create visual illusions for the driver, increasing the risk of accidents. Therefore, when modifying headlights yourself or needing replacements due to damage, never consider low-quality bulbs.
9
0
Share

What is the reason for severe shaking when starting the Sail?

The most common cause of severe shaking when starting the Sail is a dirty throttle body or excessive carbon buildup in the fuel injectors. Below are the relevant explanations: 1. Excessive carbon buildup: When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the cylinders by the engine's vacuum suction to burn, making the air-fuel mixture too rich. The engine's combustible air-fuel mixture alternates between being too lean and too rich, causing idle shaking after a cold start. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will significantly affect whether the cold start proceeds smoothly. 2. Air-fuel mixture: A too-lean air-fuel mixture during a cold start makes it difficult to start until the carbon deposits absorb enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is drawn into the cylinders by the engine's vacuum suction to burn, making the air-fuel mixture too rich. The engine's combustible air-fuel mixture alternates between being too lean and too rich, causing idle shaking after a cold start.
3
4
Share

Should I Renew the 3-Year Car Warranty After It Expires?

Whether to renew the 3-year car warranty after it expires depends on the condition of your vehicle. If there are no issues with the engine or transmission, you may choose not to renew it. Below is a detailed introduction to car insurance options: 1. Compulsory Traffic Insurance: This is a mandatory insurance required by law for all vehicle owners. It provides basic coverage in case of traffic accidents, helping the owner cover economic compensation that may otherwise be difficult to pay. The compensation amount is determined based on the owner's liability in the accident and whether it resulted in injuries or fatalities. 2. Vehicle Damage Insurance: This insurance covers damage to the insured vehicle caused by an accident while being driven by the policyholder or an authorized driver. The insurance company will compensate within reasonable limits. The premium for this insurance is largely influenced by the vehicle's purchase price and the number of seats. 3. Third-Party Liability Insurance: This insurance covers compensation for bodily injuries or property damage caused to a third party (excluding the driver and passengers of the insured vehicle) in an accident, as per the insurance terms. 4. Comprehensive Theft Insurance: This insurance provides compensation for losses due to the theft or robbery of the entire vehicle. In the event of theft, if the vehicle is not recovered within 60 days after the police have filed a case, the policyholder must provide documents such as the vehicle registration certificate, driving license, and purchase invoice to prove the vehicle's origin and legality to claim the compensation.
15
1
Share

How to Set the Time and Date on a Dash Cam?

How to Set the Time and Date on a Dash Cam Method Introduction: Click the menu button to enter the time and date settings, use the function keys to set the time, then click the menu button to return to the main interface. The setup method may vary slightly depending on the product, so it is most accurate to follow the instructions in the product manual. Below is some related information about dash cams: 1. A dash cam can record the driving process. In the event of a traffic accident, the video recorded by the dash cam captures the time and process of the accident, providing it to the traffic police or insurance company to determine the cause and responsibility of the accident. If you encounter malicious fraud, it can also be submitted as evidence to the traffic police. 2. The menu button is usually located in the lower right or lower left corner of the screen. Some dash cams may require clicking twice to enter the settings panel. A dash cam consists of components such as a camera lens, display screen, TF card slot, HDMI interface, USB data interface, mounting hole, and panel buttons. If you find that the time cannot be updated, you need to insert the dash cam's memory card into a computer, create a "time.txt" notepad file in the root directory of the storage card, input the current time, then reinsert the memory card and remove and reattach the dash cam's battery.
20
0
Share

What maintenance is required for a new car that has run over 20,000 kilometers?

After running 20,000 kilometers, the car requires primary maintenance operations, mainly based on the car's maintenance manual. Basic items generally focus on inspection and tightening, with repairs carried out as needed. Common items include changing the engine oil, oil filter, air conditioning filter, fuel filter, cleaning the air conditioning filter, and some routine inspections. Below are five key points for engine maintenance: 1. Use the appropriate grade of engine oil and change the oil and filter regularly; 2. Frequently maintain the air filter and replace it periodically; 3. Regularly clean the fuel system and replace the fuel filter; 4. Maintain the radiator cooling net periodically; 5. Replace the spark plugs at regular intervals.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.