···
Log in / Register

What is the general ground clearance of a sedan?

4 Answers
Beau
07/28/25 6:31pm

Sedan ground clearance typically ranges between 110-150mm. Below is relevant information about sedan ground clearance: 1. Generally, greater ground clearance correlates with relatively better performance. 2. Higher ground clearance in sedans results in reduced stability when driving at excessive speeds. 3. If the ground clearance is less than 110mm, the vehicle will exhibit more stable handling on highways. 4. Nevertheless, vehicles with lower ground clearance demonstrate noticeably poorer passing capability. 5. Some modern vehicles are equipped with air suspension systems, making ground clearance adjustment flexible. Drivers can automatically adjust ground clearance as needed, perfectly balancing the dual requirements of stability and passing performance.

Was this review help?
6
3
Share
BrandonMarie
08/11/25 10:28pm

I've been driving sedans for many years and found that the ground clearance typically ranges between 120 to 150 millimeters, depending on the specific model and road conditions. For instance, city roads are no problem, but when driving in suburban areas with potholes, around 140 millimeters is safer to avoid scraping the undercarriage. Tire pressure also needs attention - overinflation can slightly increase the actual height, while using air conditioning or carrying passengers will decrease the height, affecting passability. In terms of safety, moderate height reduces rollover risk and improves cornering stability. For maintenance, regularly inspect undercarriage components to prevent corrosion, and note that oil pressure at high altitudes can also affect performance. When choosing, avoid overly low sporty models as they're prone to damage and increase maintenance costs.

Was this review help?
20
1
Share
Expand All
PiperFitz
09/30/25 3:56am

As an urban commuter, a sedan with a ground clearance between 110 to 150 millimeters is generally sufficient for me and rarely causes issues. City roads are mostly flat, so a clearance around 130 millimeters is adequate for daily commuting and makes parking in garages easier. However, if driving on rural dirt roads, extra caution is needed as too low a clearance can lead to scraping and damaging the undercarriage. I've also noticed that ground clearance affects fuel consumption—higher clearance increases drag and fuel usage. Therefore, it's advisable to test-drive over speed bumps before purchasing to assess if the height suits your needs. For most family cars, 140 millimeters is the standard, and modifications are usually unnecessary.

Was this review help?
5
3
Share
Expand All
McKaden
11/13/25 5:48am

I noticed that the average ground clearance for sedans is between 120 to 150 millimeters, but for sports cars or supercars, it can be as low as 80 millimeters just for aesthetics. The measurement refers to the minimum ground clearance in an unloaded state, which can drop by 20 millimeters when fully loaded. Car designs vary; European models are typically lower, while Japanese models are slightly higher to adapt to various road conditions. When choosing a car, consider its intended use. If you frequently drive on highways, you can confidently opt for a 130-millimeter clearance, which balances both safety and comfort. Lowering the height through modifications increases risks and may also affect the warranty.

Was this review help?
14
1
Share
Expand All
More Forum Discussions

Is it acceptable to exceed the car maintenance mileage by 2000 kilometers?

It is not advisable to exceed the car maintenance mileage by 2000 kilometers. Here are the relevant explanations: 1. Lubrication level of the engine oil: If the car maintenance is overdue by 2000 kilometers, the lubrication level of the engine oil will significantly decrease. As the lubrication deteriorates, the wear between engine components will intensify, thereby affecting the engine's lifespan. It will also make the engine more prone to carbon buildup, which in turn will increase fuel consumption. 2. Oxidation level of the engine oil: The oxidation of the engine oil will become more severe, leading to a decrease in the oil's viscosity and worsening water oxidation. Such oil will contain a large amount of metal debris or gum-like substances, and these impurities will seriously affect the stable operation of the engine, thereby impacting its lifespan.
6
5
Share

Can Burmester Sound System Be Installed at Mercedes-Benz 4S Store?

The Mercedes-Benz C-Class model supports the optional Burmester sound system at 4S stores, priced at 6,900 RMB. If you choose to install it at an external decoration shop, the price may be cheaper, but it's less reliable compared to installation at a 4S store. If you opt for the original Burmester system provided by Mercedes-Benz, it may cost around 10,000 RMB, and you might be required to purchase several decoration packages. Installing it at an external shop would cost approximately 8,600 RMB. Burmester, founded in 1978, quickly rose to prominence in Germany's high-end audio industry. The company is one of the world's most respected manufacturers of high-quality stereo systems, including front panels, power amplifiers, integrated amplifiers, CD players, CD transports, D/A decoders, D/A converters, FM tuners, speakers, and other accessories, covering a wide range of price points.
16
4
Share

What is the steering wheel size of the Audi A4L?

Audi A4L steering wheel diameter is 38 cm. Audi A4L displacement (l) 2.0 length/width/height (mm) 4763/1826/1426 wheelbase (mm) 2869 maximum power (kw) 132 fuel consumption (l) 5.7 (90km/h) maximum speed (km/h) 225 transmission 8-speed multitronic continuously variable/manual integrated transmission maximum torque (nm) 320 engine 2.0t 180 horsepower. The exterior is stylish and dynamic with smooth lines; the interior has exquisite craftsmanship and good configuration; the sound effect is good; the space is spacious and practical with good comfort; a classic brand. The handling is comfortable with a sporty style, offering a wide field of vision and good steering wheel feel; the tires have good grip, the chassis is solid, and the passing performance is good; the brakes are responsive with low noise.
2
4
Share

What are the engine oil specifications for the Nissan Sylphy Classic?

According to the official maintenance recommendations provided by Nissan, the Sylphy should use 5W30 engine oil of SL grade or higher. It is recommended to use the original manufacturer's oil of this specification. Many Sylphy owners commonly use engine oils with specifications such as 10W-30, 5W-30, and 5W-40. For synthetic oil choices, brands like Mobil, Shell, and Castrol are generally preferred. Synthetic oils have a wider temperature range, longer service life, and higher cost. For the same oil film requirements, synthetic oils can achieve the desired performance with lower viscosity, whereas mineral oils require higher viscosity compared to synthetic oils to meet the same requirements. In the same working conditions, synthetic oils have a much longer service life than mineral oils, hence the higher cost. Synthetic oils are recommended for use in harsh driving conditions, such as frequent traffic congestion, hot and humid environments, etc. Fully synthetic oil is the highest grade of engine oil and is generally suitable for higher-end vehicles.
6
2
Share

Should You Expose Your Car to Direct Sunlight After Window Tinting or Not?

You should not expose your car to direct sunlight after window tinting. Here are the relevant details: 1. Precautions: After completing the window tinting process, avoid opening the side windows for 24 hours in summer and 48 hours in winter. Also, refrain from using nails or sharp objects to peel back the edges of the film to prevent dirt from entering. Direct sunlight can easily cause wrinkles on the film surface, and excessively high temperatures may even lead to a certain degree of reaction between the film and the car's paint, resulting in a loss of gloss on the paint surface. 2. Car Window Tinting: Car window tinting (Auto-film) involves applying a thin film-like material to the front and rear windshields, side windows, and sunroof of the vehicle. This film is also known as a solar film or heat-insulating film. Its primary functions include blocking ultraviolet rays, reducing heat transmission, preventing injuries from shattered glass, and reducing glare.
6
3
Share

Can a car start if water enters the fuel tank?

Car cannot start if water enters the fuel tank. Here are the relevant details: 1. Fuel Tank: The automotive fuel tank is the full name of a car's fuel tank. Currently, with the development of the automotive industry and the revitalization of the domestic automotive sector, major automobile manufacturers have shown a significant increase in demand for automotive fuel tanks. The materials for automotive fuel tanks include iron tanks and aluminum alloy tanks, along with the application and development of various new materials. 2. Precautions: Water mixed in the fuel tank needs to be addressed; otherwise, it can cause frequent stalling of the car and damage to the engine. The fuel in the tank is injected into the engine through the fuel injector. When the engine receives fuel, it continues to operate, but when it receives water, it stops working, leading to stalling.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.