What is the gasoline grade for Changan CS35?

Should the positive or negative terminal of a car battery be connected first?

First connect the positive terminal, then the negative terminal. Introduction to car batteries: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, what people refer to as a battery is a lead-acid battery. That is, a battery mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. How car batteries work: They use lead plates filled with sponge-like lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and a 22% to 28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.

11

1

Share

Can a Pickup Truck with a Rear Cover Enter the City?

A pickup truck with a rear cover cannot enter the city. Privately installing a rear box cover on a pickup truck is illegal. Modifications that are not permitted for registration changes include: Changing the brand, model, and engine type of the vehicle, except for engines that are optionally installed with the permission of the national automotive product authority. Altering the registered appearance and technical data of the vehicle, unless otherwise specified by laws, regulations, and national mandatory standards. Modification considerations: No registration is required for decorative modifications such as rearview mirrors, small stickers, or small spoilers. However, changing the color or replacing the rims or body kits must be registered. Vehicle modifications must not damage the original body structure or electrical wiring to prevent safety hazards.

14

1

Share

What is the Difference Between Touch-up Painting and Spray Painting?

Spray painting and touch-up painting differ in the following aspects: Process Differences: The processes and material selection principles for the two methods vary. Original factory paint is suitable for high-temperature baking in assembly lines. When using original factory paint for repairs, it is important to note that the paint may not dry properly if the required cross-linking and film-forming temperature is not reached. Original factory paint requires the coating thickness to meet quality standards, whereas during vehicle repairs, thickness measurement is rarely checked with a thickness gauge, which should not be overlooked. Material Differences: The painting process and materials used for automotive plastic body parts also differ and require careful distinction. Automotive touch-up paint often cannot meet the process requirements of original factory coatings. Therefore, the two should not be used interchangeably arbitrarily. Even when performing repairs on the original factory painting line, original factory paint is generally not used; instead, automotive touch-up paint is more commonly chosen.

18

0

Share

Which stroke is the power stroke?

The power stroke is the power stroke. A four-stroke internal combustion engine completes a working cycle within four strokes: intake, compression, power (expansion), and exhaust, during which the crankshaft rotates twice. Intake stroke: At this time, the intake valve opens and the exhaust valve closes. Air passing through the air filter, or the combustible mixture formed by mixing with gasoline in the carburetor, enters the cylinder through the intake pipe and intake valve; Compression stroke: The gas in the cylinder is compressed, increasing pressure and temperature; Power stroke: Before reaching the top dead center of compression, fuel is injected or ignited, causing the mixture to burn, generating high temperature and high pressure, pushing the piston downward and performing work; Exhaust stroke: The piston pushes the exhaust gas in the cylinder out through the exhaust valve. After this, the intake stroke begins again, starting the next working cycle.

12

5

Share

When Will Car Airbags Deploy?

Car airbags only deploy during severe collision accidents and will not activate under normal circumstances. The vehicle body is equipped with airbag sensors that trigger deployment during significant impacts to protect occupants. Airbags are installed in three directions: front (driver and front passenger seats), sides (front and rear seats), and roof. They consist of three components: the airbag, sensors, and inflation system. The function of airbags is to reduce occupant injuries during collisions, preventing secondary impacts or ejection from seats in rollover scenarios. In the event of a collision, the inflation system rapidly fills the airbag in less than one-tenth of a second. The expanding airbag bursts through the steering wheel or dashboard, shielding occupants from frontal collision forces. The airbag deflates approximately one second later, ensuring it does not hinder occupant movement.

7

3

Share

What is the Quest car?

The Nissan Quest is a model designed by NISSAN's American design company. Dimensions of the Quest: The Nissan Quest measures 5109 mm in length, 1970 mm in width, and 1852 mm in height, with a wheelbase of 3000 mm, offering a spacious interior. Engine of the Quest: The Nissan Quest is equipped with a 3.5-liter naturally aspirated V6 engine, model code VQ35, which is a well-known engine under the Nissan brand. Performance of the Quest: The 3.5-liter naturally aspirated engine in the Nissan Quest delivers 277 horsepower and a maximum torque of 326 Nm, achieving peak power at 6000 rpm and maximum torque at 4400 rpm.

20

3

Share

What is the gasoline grade for Changan CS35?

Should the positive or negative terminal of a car battery be connected first?

Can a Pickup Truck with a Rear Cover Enter the City?

What is the Difference Between Touch-up Painting and Spray Painting?

Which stroke is the power stroke?

When Will Car Airbags Deploy?

What is the Quest car?

What is the weight of the Baojun 630?

In which year was the Haval M6 produced?

What is the difference between a motorcycle and a locomotive?

What are the reasons for a motorcycle jerking while riding?