What is the function of wheel balancing weights?

How to Open the Hood of a Geely Boyue?

The method to open the hood of a Geely Boyue is: 1. Open the car door and enter the driver's seat; 2. Locate the hood release lever under the left side of the dashboard; 3. Pull the hood release lever upwards. The Geely Boyue is a compact SUV with four-wheel drive, featuring a MacPherson strut front suspension and a multi-link rear suspension. Its body dimensions are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm. The Boyue is equipped with a 1.8L turbocharged 4-cylinder engine, delivering a maximum power of 120kW at 5500rpm and a peak torque of 250Nm, paired with a 6-speed manual transmission.

7

5

Share

What causes the car body to shake during startup?

The reasons for car body shaking during startup are: 1. Dirty throttle body; 2. Excessive carbon deposits in fuel injectors; 3. Poor performance of ignition system, weak spark plug firing; 4. Abnormal fuel pump supply pressure; 5. Incorrect readings or poor performance of intake pressure sensor; 6. Aging engine mounts. Solutions for car body shaking during startup include: 1. Clean or replace the air filter; 2. Use a multimeter to measure resistance and replace wires with high resistance; 3. Ensure the engine operates within normal temperature range; 4. Clean fuel injectors; 5. Replace spark plugs; 6. Clean fuel system and idle speed motor; 7. Replace engine mounts.

4

0

Share

How to Replace the Battery in a Nissan Tiida Car Key?

The method to replace the battery in a Nissan Tiida car key is as follows: 1. Open the upper shell of the key to see the interior; 2. Use a flat-head screwdriver to pry open the brand logo cover plate; 3. Unscrew the screw on top; 4. Open the upper part of the key; 5. Rotate to open the upper shell; 6. Replace with the prepared battery and reinstall the cover plate. Functions of the car key: 1. After turning off the vehicle, press and hold the lock button on the remote key to close the windows; 2. The red horn-shaped button on the key has both a car-finding and emergency function; 3. It features an automatic trunk-opening function. Principle of the car key: The owner emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator motor or electromagnetic coil performs the unlocking or locking action.

14

1

Share

Does Shock Absorber Oil Leak Affect Safety?

Shock absorber oil leaks do affect safety. The impacts of a shock absorber oil leak are: 1. Reduced performance; 2. Generation of abnormal noises; 3. Decreased vehicle comfort; 4. Severe internal damage to the shock absorber, potentially leading to breakage; 5. Compromised driving safety. The function of a shock absorber: To mitigate road impacts, absorb vibrations generated during bumps, and restore the vehicle to normal driving conditions. The working principle of a shock absorber: When relative motion occurs between the frame or body and the axle due to vibrations, the piston inside the shock absorber moves up and down. The oil inside the shock absorber cavity repeatedly flows from one cavity to another through different orifices. The friction between the orifice walls and the oil, as well as the internal friction among oil molecules, creates a damping force that converts the vehicle's vibration energy into heat energy of the oil, which is then absorbed by the shock absorber and dissipated into the air.

15

1

Share

Reasons for the Clicking Noise from the Air Conditioning Compressor

The reasons for the clicking noise from the air conditioning compressor are: 1. Damaged electromagnetic clutch or internal wear of the compressor; 2. Refrigerant leakage; 3. Damaged compressor capacitor or other circuit faults. The functions of the car air conditioning system: 1. Achieving cooling effects through the continuous circulation of refrigerant; 2. Removing dust, odors, smoke, and toxic gases from the air inside the car to freshen the air, and humidifying the air to increase relative humidity; 3. Using engine coolant, waste heat, or heat generated by a burner as a heat source, which is then heated by a heater and blown into the car by a fan to raise the temperature of the air outlets for heating purposes; 4. Drawing in fresh external air for ventilation and air exchange, which also helps prevent windshield fogging.

14

5

Share

Where is the engine number of Audi A6?

The engine number of the A6 is located on the lower left side of the engine, near the flywheel position. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, processes, intended use, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, processes, intended use, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose passenger vehicles are required to clearly indicate the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production number of the engine, and each engine has a unique number that cannot be duplicated. Composition of the vehicle engine number: First part: Includes product series code, generation symbol, and regional or corporate code. Manufacturers can choose the appropriate letters as needed, but they must be approved and filed by the industry standard regulatory body. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear part: Composed of symbols for structural features and intended use. End part: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol. The rear and end parts can be separated by a hyphen (-).

14

3

Share

What is the function of wheel balancing weights?

How to Open the Hood of a Geely Boyue?

What causes the car body to shake during startup?

How to Replace the Battery in a Nissan Tiida Car Key?

Does Shock Absorber Oil Leak Affect Safety?

Reasons for the Clicking Noise from the Air Conditioning Compressor

Where is the engine number of Audi A6?

What Transmission Does the Mazda6 Equip?

What is the engine oil capacity of the Buick GL8 in liters?

What Causes a Car Not to Start?

Where is the cigarette lighter located in the Mondeo?