What is the function of turbocharging in cars?

What is the method for setting cruise control on the Reiz?

The method for setting cruise control on the Reiz is: 1. Increase the vehicle speed to over 40 km/h, then press the set button to establish the current speed; 2. You can press the res+ or set- buttons to fine-tune the speed to reach the desired speed; 3. The cruise control indicator light on the dashboard will illuminate and display the cruise speed. Taking the 2013 Reiz as an example, its body dimensions are: length 4750mm, width 1795mm, height 1450mm, wheelbase 2850mm, fuel tank capacity 70l, and curb weight 1595kg. The 2013 Reiz is equipped with a 3.0l naturally aspirated engine, with a maximum horsepower of 227ps, maximum power of 167kw, maximum torque of 293nm, paired with a 6-speed automatic transmission.

2

4

Share

Is it mandatory to change to the left lane after turning on the left turn signal during the starting phase of Subject 3?

During the Subject 3 driving test, you cannot directly change to the left lane after turning on the left turn signal when starting. You must observe the left rearview mirror, confirm safety, sound the horn, release the parking brake, start smoothly, and then turn off the turn signal. Rolling backward is prohibited when starting on a slope. Before starting, failure to observe the interior and exterior rearview mirrors or turning the head to check the rear traffic conditions will result in an immediate deduction of 100 points. Relevant regulations: According to Article 31 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the content of the Subject 3 road driving skills test includes: preparation for getting into the vehicle, starting, driving straight, and gear shifting operations for large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled. Test content: Changing lanes, pulling over to the side, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The test content for other permitted vehicle types is determined by the provincial public security traffic management department.

6

3

Share

How to use the cruise control on the Teana?

The method to use the cruise control on the Teana is: press the cruise control switch on the right side of the steering wheel. Taking the 2021 Teana as an example, it is a mid-size car with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. The 2021 Teana features a MacPherson strut front suspension and a trapezoidal control arm multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156ps, a maximum torque of 197Nm, and a maximum power of 115kW, paired with a continuously variable transmission.

15

5

Share

What are the key operating points of the brake pedal?

Brake pedal operation essentials are: 1. In traffic congestion, press the brake pedal gently; 2. On rainy or muddy roads, lightly press the brake pedal continuously; 3. In emergency situations, firmly press the brake pedal immediately and then release it gradually, followed by repeatedly pressing and releasing the pedal gently. The braking system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs. Brake system maintenance methods include: 1. High-temperature protection; 2. Cleaning oil stains, dirt, and friction dust from brake discs, drums, and all components to ensure good heat dissipation; 3. Regularly replacing brake fluid; 4. Periodically checking the thickness of brake pads or shoes.

12

4

Share

What Are the Reasons for a Motorcycle's Electric Start Making a Squeaking Noise and Failing to Ignite?

Motorcycle's electric start making a squeaking noise and failing to ignite is due to: 1. Damaged spark plug; 2. Weak battery; 3. Blocked gasoline flow, long-term dirt in the fuel line. The reasons for a motorcycle frequently stalling during startup are: 1. The fuel line is too short or pulled too tight, causing insufficient fuel supply or the use of unclean fuel; 2. Excessive valve clearance, valve leakage leading to abnormal cylinder pressure, or severe wear of piston rings and cylinder walls, resulting in insufficient cylinder pressure; 3. Dirty air filter, causing severe lack of air intake leading to inability to move or even direct stalling; 4. Poor insulation of the high-voltage coil, severe erosion of the spark plug, or unstable components like a switch tube in the ignition ECU due to high temperature causing stalling.

9

1

Share

Does the height of the seat affect reverse parking in Subject 2?

Seat height does affect reverse parking. In Subject 2, tasks such as hill starts, right-angle turns, and reverse parking all require visual references. If the seat is adjusted, these reference points will change. If the seat height is unsuitable for the driver, errors may occur during reverse parking. Method for adjusting the seat in Subject 2: Adjusting the car seat mainly involves three parts: height, distance, and backrest. Remember the following three points to easily replicate the same adjustment each time. First, adjust the seat to the most comfortable position, then record three measurements. Height: Use an item inside the car as a reference, such as how much of the wiper or spray nozzle is visible, to determine the seat height. Distance: When adjusting the seat distance, count the number of notches the seat moves forward and remember this number to set the distance. Backrest: Adjust the backrest so that your shoulders are close to the seatback, extend your arms, and ensure your wrists rest comfortably on the steering wheel to finalize the backrest adjustment. Standard for seat adjustment in Subject 2: Vertical adjustment: When adjusting the seat height, ensure there is at least one fist's distance between your head and the car roof. Horizontal adjustment: Place your feet on the clutch and brake pedals, with your knees slightly bent. When fully depressing the pedals, your legs should still have some bend. Lumbar support: Adjust the seat to support your lower back. Lean back to prevent your lower back from being unsupported, which reduces fatigue while driving. If the seat lacks lumbar support, place a cushion behind your lower back.

18

2

Share

What is the function of turbocharging in cars?

What is the method for setting cruise control on the Reiz?

Is it mandatory to change to the left lane after turning on the left turn signal during the starting phase of Subject 3?

How to use the cruise control on the Teana?

What are the key operating points of the brake pedal?

What Are the Reasons for a Motorcycle's Electric Start Making a Squeaking Noise and Failing to Ignite?

Does the height of the seat affect reverse parking in Subject 2?

What is the correct way to use the L gear?

What does the BMW DTC button mean?

What does the faucet symbol on the dashboard mean?

What is the Difference Between Automatic and Manual Car Air Conditioning?