What is the function of the S gear in the Tiguan?

1 Answers
SanAshlyn
07/29/25 10:14pm
S gear stands for SPORT (Sport Mode). Below is an introduction to the Tiguan: 1. Introduction: The Volkswagen Tiguan is a car produced by Shanghai Volkswagen, with its price announced on March 26, 2010. This compact SUV made its first appearance to consumers at the 2009 Guangzhou Auto Show. 2. Development: Upon its debut, it received widespread attention and popularity. The introduction of the Tiguan broke the awkward situation of the absence of domestically produced SUV products from German car manufacturers, while also providing consumers with more and better choices. 3. Structure: The Shanghai Volkswagen Tiguan offers a total of 4 versions and 7 models, including the Urban Edition, Trendline, Elite, and Flagship. They are equipped with Volkswagen's flagship 1.8TSI and 2.0TSI engines, which deliver outstanding performance in both power and fuel efficiency. The matched 6-speed manual transmission and Aisin 6-speed automatic transmission can better utilize the power, offering exhilarating performance while also being more environmentally friendly in terms of emissions.
Was this review help?
14
0
Share
More Forum Discussions

Which gear should be used for automatic transmission cars on highways?

For automatic transmission cars on highways, you can use the S gear or D gear. The following are the speed regulations for highway driving: 1. Vehicle speed limits: The maximum speed for small passenger cars must not exceed 120km/h, other motor vehicles must not exceed 100km/h, motorcycles must not exceed 80km/h, and the minimum speed must not be lower than 60km/h. 2. Lane speed limits: For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100km/h; for roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110km/h. The minimum speed for the middle lane is 90km/h, and vehicles traveling at speeds above 60km/h but below 90km/h should drive in the rightmost lane.
6
3
Share

What Are Automatic Headlights?

Automatic headlights, also known as auto-sensing headlights, are essentially headlights equipped with a photosensitive control system. The central intelligent control box uses a light sensor to detect changes in ambient brightness, thereby controlling the automatic activation or deactivation of the headlights. Below is more information about automatic headlights: 1. When suddenly entering a tunnel from a bright area, the headlights automatically adjust their brightness to illuminate the road ahead. 2. Automatic headlights eliminate the need for drivers to manually search for the switch when headlights are required, while also preventing them from forgetting to turn on the headlights at night or in low-light conditions, thereby enhancing driving safety. 3. Automatic headlights activate when environmental light is insufficient, ensuring driving safety. However, they only function when the light control is set to the automatic mode.
17
1
Share

How to Deal with a U-Turn on the Highway?

Solutions for a U-turn on the highway are as follows: A U-turn route is not considered a traffic violation, and highway police will not issue a fine. However, toll stations will charge a fee based on the time spent on the road—the longer you stay, the higher the fee. Below are some precautions for driving on the highway: 1. Maintain a Safe Distance: Vehicles on the highway move at high speeds, leaving drivers with limited reaction time. It is crucial to maintain a sufficient distance from the vehicle in front so that you can react promptly to any unexpected situations. 2. Avoid Stopping on the Highway: Unless in an emergency, stopping on the highway is not allowed. If you must stop, pull over to the emergency lane and place a red warning sign approximately 150 meters behind your vehicle to alert other drivers.
8
3
Share

Why does the accelerator pedal feel heavy when pressed?

The reasons for a heavy accelerator pedal are: 1. The power assist component is faulty; 2. There is an obstruction in the transmission part, or friction has increased; 3. The throttle body is dirty. The accelerator is generally controlled by a pedal, also known as the acceleration pedal, which is a device used to control the fuel supply of the vehicle's engine. The operation of the accelerator pedal should use the right heel placed on the floor of the driver's compartment as a pivot, with the sole gently pressing on the accelerator pedal, using the flexion and extension of the ankle joint to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow release. During operation, the accelerator should be increased or decreased according to road conditions and actual needs, and the selected gear should be appropriate, allowing the engine to run most of the time at medium speed and with a larger throttle opening to save fuel.
7
3
Share

What is the function of the engine coolant reservoir?

The function of the engine coolant reservoir is to facilitate the observation of whether the coolant is insufficient and to store the coolant. Here is more information about coolant: 1. The coolant in the car's cooling system not only prevents water from freezing but also reduces scale formation, wear on the water pump impeller, and improves heat dissipation capacity. 2. When the coolant temperature rises and its volume increases, the liquid pressure will push open the valve on the radiator, allowing the coolant or steam in the radiator to enter the reservoir through the steam connecting pipe. When the coolant temperature decreases, the pressure in the radiator drops, and the coolant flows back to the radiator through the intake valve on the radiator cap via the connecting pipe. 3. There is a steam outlet pipe at the top of the reservoir cover. If the steam temperature becomes too high, the steam can be discharged through the steam outlet pipe.
20
5
Share

Where and How to Process Motorcycle Deregistration?

Motorcycle deregistration involves the following procedures: 1. Traffic accident settlement: The vehicle owner must first settle all traffic violations and accidents related to the motorcycle before processing the deregistration. 2. Document review: At the service window, submit and have the following documents reviewed and returned: 'Motor Vehicle Registration Certificate', 'Motor Vehicle License', and 'Motor Vehicle License Plate'. The deregistration timeline is as follows: 1. Motor vehicle deregistration certificate: Collect the 'Motor Vehicle Deregistration Certificate' from the service window within 1 working day from the date of application. 2. Insurance documents: For vehicles returned due to quality issues: Collect the vehicle's certificate of origin, quality certificate or import certificate, tax payment certificate or tax exemption certificate for vehicle purchase tax, and compulsory traffic accident liability insurance certificate.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.