What is the function of the hold button on a car key?

2 Answers
Christian
07/28/25 8:34pm
The hold button, when pressed for a few seconds, can open the trunk. Here is some related information: 1. The word "hold" in English originally means "to keep, to grasp, or to control." On a remote key, it is used in the sense of keeping. Unlike the unlock and lock functions, opening the trunk is an operation typically needed only when the car is parked. The requirement to press the hold button for a few seconds to open the trunk is designed to prevent the trunk from opening accidentally while the vehicle is in motion, which could be dangerous. Hence, the term "hold" is used. 2. Generally, a car key has three buttons: unlock, lock, and open trunk. In addition to these three buttons, some car models have a fourth button on the key, which is a red button added to the standard three. Some red buttons may have a horn symbol or the word "Panic" printed on them. This button is technically referred to as the "car finder button."
Was this review help?
20
4
Share
OliviaRose
08/12/25 1:20am
As someone who frequently commutes by car during the cold winter months, the HOLD function has been a lifesaver. On my car key, there's a 'HOLD' button—just press and hold it for a few seconds, and the engine starts remotely. This way, a few minutes before heading out in the bitter cold, I can press it to activate the heater automatically, ensuring a warm and cozy interior by the time I get in. It saves me from freezing while waiting for the car to warm up. The same goes for scorching summer days—pre-cooling the car makes stepping inside refreshingly comfortable. However, safety is key: only use it in open outdoor spaces to avoid carbon monoxide buildup in enclosed garages. I've also noticed that button placement varies by model, with newer cars being more responsive, while older vehicles might need an aftermarket system. The signal range is typically limited to 30 meters; beyond that, the button may not work. Overall, this thoughtful feature boosts daily convenience, eliminating the rush of hurried starts and making commutes smoother.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What happens if a motorcycle hasn't been inspected for 10 years?

A motorcycle that hasn't been inspected for 10 years will be automatically deregistered. Motorcycle inspection cycle: Starting from June 1, 2019, motorcycles nationwide can be inspected anywhere in China and are exempt from inspection for the first 6 years. For vehicles registered after June 1, 2017, they can enjoy the exemption policy for 3 inspections. For motorcycles registered between June 1, 2015, and May 31, 2017, since they have already been inspected once, they can enjoy the exemption policy for 2 inspections. Motorcycle inspection process: Apply for the inspection compliance mark at the vehicle registration office within three months before the expiration of the current inspection period. The vehicle registration office should confirm the vehicle, review the submitted documents and certificates, and issue the inspection compliance mark within one day of acceptance.
3
4
Share

How often should a motorcycle be inspected within 4 years?

Motorcycles should be inspected every 2 years within the first 4 years; for vehicles that are 4 years or older, an annual inspection is required. Below are the regulations for motorcycle annual inspection timing and important considerations: Motorcycle Annual Inspection Time Regulations: For trucks and large or medium-sized non-commercial passenger vehicles, an annual inspection is required within the first 10 years; for vehicles over 10 years old, inspections are required every 6 months. Small and micro non-commercial passenger vehicles must be inspected every 2 years within the first 6 years; for vehicles over 6 years old, an annual inspection is required; for vehicles over 15 years old, inspections are required every 6 months. Motorcycles must be inspected every 2 years within the first 4 years; for motorcycles over 4 years old, an annual inspection is required. Important Considerations for Motorcycle Annual Inspection: Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates that motor vehicles must undergo safety technical inspections according to the specified dates starting from the date of registration. Vehicles that fail the inspection will be subject to compulsory scrapping measures.
14
5
Share

Should Temporary License Plates Be Attached to Motorcycles?

Motorcycle temporary license plates must be attached to the vehicle. On March 6, 2014, the Traffic Management Bureau of the Ministry of Public Security issued a notice regarding the implementation of the industry standard GA36-2014 "Motor Vehicle License Plates of the People's Republic of China." According to this standard and the requirements of GB7258-2012, motorcycles are only required to display a rear license plate and do not need a front license plate. This standard has been in effect since January 24, 2014. A temporary license plate is a paper motor vehicle license plate that permits temporary road use, issued by the vehicle management department of the public security authority for newly purchased vehicles before formal registration. Temporary license plates serve as transitional plates before the owner obtains the official license plate, and they hold the same legal validity as official plates. Once the official license plate is obtained, the temporary plate becomes invalid. Motorcycle license plate installation requirements: The license plate should be installed on the license plate bracket (frame) with the characters facing outward and in the correct orientation; reverse or upside-down installation is prohibited. The front license plate should be installed in the middle or slightly to the right of the front end of the vehicle, while the rear license plate should be installed in the middle or slightly to the left of the rear end, without affecting the safe operation of the vehicle or the identification of the license plate. The installation must ensure that the license plate is free from any deformation or obstruction, horizontally level, and vertically perpendicular to the ground, with a vertical angle not exceeding 15° (for motorcycle license plates, the upward tilt angle may not exceed 30°). All installation holes for the license plate should be fitted with motor vehicle license plate fastening devices that meet the GA804 requirements (the fastening devices should bear the "Gui*" mark), unless vehicle conditions prevent installation. When using a license plate frame for auxiliary installation, the inner edge of the frame should be more than 5mm away from the edge of the motor vehicle registration number characters, and the production serial identifier must not be obscured. There should be no other light sources around the license plate that may affect its identification.
7
2
Share

Is 5000 Kilometers Considered High Mileage for a Motorcycle?

Motorcycle engines perform at their best between 6000 and 16000 kilometers, so 5000 kilometers is not considered high mileage. Below is an introduction to motorcycle engines and maintenance tips: Introduction to Motorcycle Engines: A motorcycle engine converts the thermal energy generated by igniting the fuel-air mixture in the cylinder into mechanical energy. The crankshaft then transmits this power through the transmission mechanism to the rear wheel, propelling the motorcycle forward. Due to their advantages such as light weight, compact size, low noise and vibration, easy starting, and low cost, gasoline engines are widely used as the power source for motorcycles. Engine Maintenance Tips: Poor engine maintenance is the most common cause of engine warning lights. All vehicles have a specific maintenance schedule. If the owner fails to adhere to this schedule and combines it with poor driving habits, the engine's operational burden increases, eventually triggering the warning light as a reminder to check the vehicle.
15
3
Share

How Many Rings Can a Motorcycle with a B License Enter?

Motorcycles with a B license can enter roads outside the third ring. Regulations on motorcycle restrictions in urban areas: During weekday morning and evening peak hours, from 7:00 to 9:00 and 17:00 to 20:00, motorcycles are prohibited from driving on the main roads, auxiliary roads, and roads within the fifth ring. From 9:00 to 17:00 on weekdays, motorcycles must comply with the city's tail number restriction policy and the restricted area. Legal basis for motorcycles entering urban areas: Traffic management departments of public security organs and their traffic police should promptly correct road traffic safety violations. They should impose penalties based on facts and relevant provisions of the law. For minor violations that do not affect road traffic, after pointing out the violation and giving an oral warning, the vehicle may be released.
6
3
Share

How long after a motorcycle is registered can it be transferred?

After a motorcycle is registered, the transfer can be processed the next day after completing the necessary procedures, with no time restrictions. Below are the relevant documents and precautions for motorcycle transfer: Documents required for motorcycle transfer: The authorized person must have a local ID card or temporary residence permit and must fill out a power of attorney to proceed with the vehicle registration transfer. In other words, if one party cannot attend the transfer process, that party needs to obtain a notarized power of attorney from a local notary office. Precautions for motorcycle transfer: Unauthorized modifications, alterations, changes in cargo weight or passenger capacity, motorcycles that have reached the scrapping age (if the vehicle condition is good, it may pass a special inspection and be eligible for transfer, but not for re-registration in another jurisdiction), and vehicles under purchase control without the "License Plate Application Certification Stamp" cannot be transferred.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.