What is the function of the fourth button on the Changan CS35Plus key?

2 Answers
Tessa
07/28/25 3:51pm
The function of the fourth button on the Changan CS35Plus key is remote engine start, but it can only start the engine without any other functions. The usage instructions for the Changan CS35Plus remote key are as follows: 1. Remote start: When all doors are closed and locked, and the security indicator light on the dashboard starts flashing (after locking for 5 seconds), press and hold the remote start button for more than 0.2 seconds to start the engine, achieving remote start. 2. Exit remote start: If the owner wants to exit remote start, during the remote start process or after a successful start, press the remote start button on the key again to exit remote start. At the same time, you will hear a horn sound, and the power gear will switch to the OFF position. The EPB is in the released state, or the handbrake is in the lowered state, or the remote start mode switches to the normal start mode.
Was this review help?
7
2
Share
SanPenelope
08/11/25 11:04pm
The fourth button on my Changan CS35 Plus key is specifically for opening the trunk. When pressed, the trunk pops open effortlessly, which is incredibly practical. Whether I'm driving to buy groceries or loading luggage, I can just press the button with one hand while holding items in the other—no need to fiddle with the key. It also has an anti-misoperation feature, requiring a three-second press to activate, ensuring safety. However, be mindful not to stand too far from the car or have obstacles blocking the signal, as this may slow the response. If the key battery is running low, the trunk light won’t flash or the trunk may open slowly—time to replace the battery. This thoughtful design makes daily car use much more convenient, and over time, I’ve found it truly enhances the driving experience.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the reason for the F1 malfunction light on the Suzuki DL250?

Suzuki DL250 F1 malfunction light requires the use of a specialized diagnostic computer to read the fault code. The following are the specific details of the DL250: 1. Power: The DL250 is equipped with a twin-cylinder water-cooled electronic fuel injection engine, with an actual displacement of 248ml, a maximum power of 18.4KW, and a maximum torque of 23.4N.m. 2. Dimensions: The DL250 has a wheelbase of 1430mm, a curb weight of 188kg (without cases), a fuel tank capacity of 17.3L, front tire size 110/80-17, and rear tire size 140/70-1.
18
1
Share

What car has five vertical stripes?

Five vertical stripes represent the WM Motor. Taking the WM W6 as an example, the relevant information is as follows: 1. Exterior: The WM W6 has overall dimensions of 4620/1847/1730mm with a wheelbase of 2715mm. The exterior adopts the "Aerospace Technology" design concept, drawing inspiration from the rounded and full shape of spacecraft to create a minimalist style that aligns with contemporary aesthetic trends. 2. Powertrain: The WM W6 is equipped with an efficient three-in-one permanent magnet synchronous motor, delivering a maximum power of 160kW and a maximum torque of 225Nm. 3. Intelligent Assistance System: The WM W6 also features a comprehensive upgrade to the full-function L2-level intelligent assistance system developed for Chinese road conditions. It comes with the new Living-Pilot 3.0 Intelligent Driving Assistance System, offering 20 driving assistance configurations.
6
4
Share

How much antifreeze should be added to a Polo car?

The Polo car requires approximately 4 liters of antifreeze. The full name of antifreeze should be antifreeze coolant, which means a coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the car is parked in cold winter. The Polo is a car under the Volkswagen brand, with a body length, width, and height of 4053mm, 1740mm, and 1449mm respectively, and a wheelbase of 2564mm. The Polo is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 113ps, a maximum power of 83kw, a maximum torque of 145nm, a maximum power speed of 6000rpm, and a maximum torque speed of 3900rpm.
14
5
Share

Where is the license plate Lu F from?

Lu F is the license plate for Yantai. License plates for other regions in Shandong are: Lu A Jinan, Lu B Qingdao, Lu C Zibo, Lu D Zaozhuang, Lu E Dongying, Lu F Yantai, Lu G Weifang, Lu H Jining, Lu J Tai'an, Lu K Weihai, Lu L Rizhao, Lu M Binzhou, Lu N Dezhou, Lu P Liaocheng, Lu Q Linyi, Lu R Heze, Lu S Laiwu, Lu U Qingdao supplement, Lu V Weifang supplement, Lu W provincial government agencies, Lu Y Yantai supplement. License plates, commonly known as car plates, refer to the plates hung on the front and rear of a vehicle. They are usually made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
17
3
Share

How to turn on the headlights of BYD F3?

Method to turn on the headlights of BYD F3: Turn the left lever once to turn on the width lights, turn it twice to turn on the low beam plus width lights, push it down to turn on the high beam, and pull it up to flash the high beam momentarily. The fog light switch is located on the small control panel on the left side, which is a long button. There are two types of car light switches: one is a rotary lever switch, and the other is a rotary knob switch. The BYD F3 is an A+ class passenger car produced by BYD Auto, with a length, width, and height of 4533 mm, 1705 mm, and 1490 mm respectively, and a wheelbase of 2600 mm. In terms of active safety, the BYD F3 is equipped with four-wheel ABS plus EBD and uses four-wheel disc brakes. For passive safety, it is equipped with front dual airbags and front pre-tensioned and rear ordinary seat belts.
17
5
Share

How to Solve the Problem of Car Hazard Lights Continuously Flashing?

Solutions for continuously flashing car hazard lights: 1. Check the control box to see if the hazard light relay is functioning properly. Use a multimeter to measure the output line of the hazard light relay to see if there is a 12v output. If there is intermittent output variation, it indicates normal operation; 2. If there are abnormal issues with the wiring, professional personnel should be consulted for troubleshooting; 3. Simply remove the fuse of the hazard lights. This will stop the continuous flashing without affecting the use of the car lock and turn signals, making it a relatively decisive solution. Purpose of hazard lights: To alert other vehicles in case of emergencies; They should also be turned on when parking on the roadside to prevent rear-end collisions.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.