What is the function of the combination valve?

What are the steps to remove a car battery?

The steps to remove a car battery are: 1. Loosen the negative terminal nut; 2. Remove the negative terminal; 3. Remove the positive terminal; 4. Unscrew the nut of the battery clamp, release the clamp, and take out the battery. The functions of the car battery are: 1. To power the starting system, ignition system, and electronic fuel injection system when the engine starts; 2. To power the car's electrical equipment when the engine stops or runs at low idle; 3. To assist in powering the electrical equipment when the generator's output is insufficient; 4. To buffer the impact voltage in the electrical system and protect the electronic equipment in the car; 5. To store excess electricity generated by the alternator.

1

4

Share

How long can the Wuling Hongguang Mini 120 km run?

Wuling Hongguang Mini 120 km can run for about 2 hours. SAIC-GM-Wuling Automobile Co., Ltd. was established on November 18, 2002, and was jointly funded by three companies, including SAIC Motor Corporation Limited, General Motors Corporation, and Guangxi Automobile Group Co., Ltd., with Guangxi Automobile Group Co., Ltd. being the former Liuzhou Wuling Automobile Co., Ltd. Below is an introduction to Wuling Automobile: 1. Technical Introduction: SAIC-GM-Wuling has a national-level technical center and a "Corporate Postdoctoral Research Station" approved by the National Personnel Department. It employs a group of experts and professors as technical consultants, implements the C3P (CAD/CAE/CAM/PDM) automotive development technology system research project, and operates product development in an integrated manner with the Pan Asia Technical Automotive Center. Using General Motors' GVDP (Global Vehicle Development Process) and GMS (Global Manufacturing System) as the main methods, it focuses on management innovation and teamwork, enabling the company's technological innovation capabilities to be comprehensively enhanced. 2. Product Range: SAIC-GM-Wuling produces products including micro commercial vehicles, micro vans, micro double-row trucks, micro single-row trucks, micro passenger vehicles, and more, totaling over 200 models across five series. It successfully passed the national "3C" certification in 2003 and became the only micro vehicle company to receive the national quality reputation "AAA" level certification in 2005.

15

1

Share

What are the reasons for a car stalling after starting?

The reasons for a car stalling after starting are: 1. The car's anti-theft system is triggered, causing the engine to lock; 2. Ignition switch failure; 3. Damage to the ignition module or the ignition reference signal line from the ignition module to the engine computer; 4. Low fuel pump pressure, fuel line leakage, insufficient power supply current, or damage to the fuel pressure regulator; 5. Carbon deposits in the engine. Solutions for a car stalling after starting: 1. Check if the car's anti-theft system is triggered; 2. Inspect the working condition of the ignition switch; 3. Check for faults in the ignition module and signal line; 4. Examine the fuel lines for leaks; 5. Clean carbon deposits from the engine; 6. Verify if the battery has sufficient charge.

12

1

Share

What is the oil pressure standard for the EA888 engine?

The oil pressure standard for the EA888 engine is 6 to 40 bar. The method for changing the oil is as follows: 1. Lift the vehicle, remove the underbody cover, and place a container beneath the oil drain plug; 2. Loosen the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug and wipe it with a tissue to check for leaks; 3. Reinstall the underbody cover, lower the vehicle, and add oil through the filler port. Precautions for changing the oil: 1. Perform the procedure while the engine is warm to ensure the old oil is drained as thoroughly as possible; 2. Add oil and ensure the amount is appropriate; 3. After adding oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.

1

3

Share

Why Does the Driver's License Only Have 11 Points?

The driver's license has a total of 12 points, and having 11 points remaining means that only 11 points are still available for processing. It does not mean that 11 points have been deducted from the license, but rather indicates that if there are any violations, there are still 11 points that can be deducted. You can check the violation records on the traffic violation platform. Below is relevant information about driver's license points: Driver's License Points Cycle: The points cycle starts from the date the driver's license was obtained. For example, if the license was obtained on November 4th, then November 4th marks the beginning of a points cycle, which lasts until November 3rd of the following year. Points Rules: Driver's license points are penalties for traffic violations committed by the driver. Depending on the severity of the traffic violation, points can range from a maximum of 12 to a minimum of 1 per violation. The points cycle corresponds to an inspection period. If a driver accumulates 12 points within one cycle, they lose their driving privileges. Restoring Driving Privileges: Typically, the driver must complete no less than 7 days of traffic safety education and pass an exam before their driving privileges can be restored. The points system serves to enforce compliance with traffic safety laws, thereby reducing the incidence of traffic accidents. However, in practice, the enforcement of points penalties often lacks seriousness and standardization, rendering the system somewhat superficial.

16

0

Share

What to Do When the Car Remote Control Fails?

Solutions for car remote control failure include: 1. Check the battery circuit or replace the battery; 2. Inspect the condition of wiring aging; 3. If the remote key is unusable, use the mechanical key to lock the car; 4. Check for open or short circuits in the lock block and control wiring; 5. Park the car in a different location and try again to avoid magnetic field interference with the signal. Reasons for car remote control failure are: 1. Strong magnetic field interference around the car; 2. Car malfunction; 3. Dead battery or poor battery contact; 4. Aging antenna in the car's remote transmitter; 5. Failure of the timing control module in the remote key.

19

2

Share

What is the function of the combination valve?

What are the steps to remove a car battery?

How long can the Wuling Hongguang Mini 120 km run?

What are the reasons for a car stalling after starting?

What is the oil pressure standard for the EA888 engine?

Why Does the Driver's License Only Have 11 Points?

What to Do When the Car Remote Control Fails?

What are the evaluation criteria for smooth gear shifting in Subject 3?

What Causes the Unpleasant Odor When Turning on the Car Air Conditioner?

What is the difference between Changan Oushang and Changan Automobile?

What is the method to distinguish between oil grades?