What is the function of the car AC?

1 Answers
DelEloise
07/29/25 2:49pm
The AC button is the air conditioning cooling switch. The functions of the AC button are as follows: 1. Pressing the AC button activates the air conditioning cooling compressor, which blows out cold air. During hot summer weather, it is necessary to turn on the A/C button, at which point the car's compressor will start working and blow cold air. Car air conditioning heating has nothing to do with the compressor; the heat source for heating is not obtained from the air conditioning itself (meaning there will be warm air even without pressing the A/C button) but is provided by the car's radiator, relying on the heat generated by the engine. The heat is then blown into the car by the blower, with almost no energy consumption, so there is no need to turn on the A/C button. 2. When using the air conditioning for heating in winter, the A/C light being on does not help with heating at all. Instead, it causes unnecessary power loss due to the operation of the compressor. Therefore, when using the air conditioning for heating in northern winters, the A/C can be completely turned off without any impact on the heating function.
Was this review help?
15
5
Share
More Forum Discussions

How to Adjust the Right Side Mirror?

The adjustment methods for the left and right rearview mirrors are slightly different. First, adjust the right rearview mirror to ensure that the top of the mirror can see the rear door handle. The adjustment method for the left rearview mirror is similar to the right one, but make sure to see the position of the left rear wheel when parking sideways.
1
0
Share

How to Determine the Front Position of the Car While Sitting Inside?

You can check if the windshield washer nozzles align with your line of sight or select a reference object to compare with the car body to see if the car is straight. Use the rearview mirror to observe whether the car body is parallel to the parking line. If not, make timely adjustments during the reversing process.
10
1
Share

Under what circumstances is the S gear used?

S gear can be used during rainy days and foggy weather as it enhances the vehicle's traction. The following details the S gear: 1. The S gear on motor vehicles is the sport mode, which is typically available in most mid-to-high-end models. 2. When the vehicle is in S gear, the transmission can shift freely, but there is a slight delay during gear changes. This keeps the engine at higher RPMs for an extended period, allowing the car to operate at lower gears with higher RPMs for a prolonged duration, thereby delivering greater torque output and speed acceleration.
18
4
Share

How to Renew an Expired C1 Driver's License?

There are two ways to renew an expired C1 driver's license: One is to visit the local traffic management department in person. According to Article 57 of the "Traffic Regulations and Penalty Rules": The driver of a motor vehicle shall apply for license renewal at the vehicle management office where the license was issued or another office within 90 days before the expiration of the driver's license. The other method is to use the online renewal service via the Traffic Management 12123 app (V2.8.1B437 for iOS 15 and above or V2.8.1B274 for Android 12 and above). Taking Apple iOS 15 as an example: Open the Traffic Management app on an iPhone, navigate to the driver's license services page, and select 'Renewal upon Expiration.' After reading the instructions, fill in your personal information and proceed to the driver's license details page. Then, move to the next step to upload a new license photo and medical examination report. Finally, enter the mailing address information, confirm everything is correct, and pay the relevant fees. For the annual renewal of an expired driver's license, the old license must be surrendered to the vehicle management office. According to Order No. 123 from the Ministry of Public Security, the renewal can be applied for up to 90 days in advance at the original issuing office. Documents required for license renewal: Original and photocopy of ID card. Medical examination report from a hospital designated by the vehicle management office. Completed driver's license renewal application form and processing fee. Three one-inch white-background color photos. You can bring your own photos and medical examination report. If you're concerned about non-compliance, you can complete these at the traffic police office to save time. Important notes about license renewal: If caught driving with an expired license, you will be fined but not penalized with points. There are deadlines for renewal: If expired for less than a year, you can renew normally; if expired for one to three years, the license will be canceled, but you can regain it by passing the written test (Subject 1); if expired for over three years, the license is permanently canceled. For applicants of special small automatic passenger vehicles for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority must be submitted.
6
4
Share

Why is there no response from the reverse camera when shifting into reverse gear?

When the reverse camera does not respond after shifting into reverse gear, it is usually due to the head unit freezing. In this case, you need to restart the head unit and then try shifting into reverse gear again. If the reverse camera still does not respond after restarting, it is generally a malfunction of the head unit, and you should take it to a repair shop or 4S store for professional inspection and repair. Below are the common reasons for reverse camera malfunctions: 1. Poor contact in the reverse camera wiring or switch: If the connection cable between the camera and the car display comes loose, or if the reverse camera switch is damaged, it can cause the reverse camera to not display. In this case, you need to reconnect the wiring or replace the switch if necessary. 2. Reverse camera module failure: There are many reasons for reverse camera module failure, including system disorder, module code corruption, or reverse camera formatting issues. This requires professional inspection at a repair shop. 3. Car battery dead: The reverse camera display relies on the car battery for power. If the car battery is dead, the reverse camera will naturally not display. In this case, you should promptly recharge the car battery.
19
4
Share

Why is there water and abnormal noise in the exhaust pipe?

Abnormal noise in the exhaust pipe can be caused by the following reasons: 1. The idle speed is too low. Adjust the idle speed to 750 rpm. 2. If the idle speed is normal, check whether each cylinder of the engine is working properly and if there is any misfiring issue. 3. Loose exhaust pipe fixing screws or muffler failure. Check the tightness of all fixing screws on the exhaust pipe and whether the welds between the muffler and the exhaust pipe have come loose. Here is some information about the car exhaust pipe: 1. The car exhaust bellows, also known as the car exhaust pipe hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, providing flexible connection for the entire exhaust system. 2. It helps to reduce vibration and noise, facilitate installation, and extend the service life of the exhaust muffler system.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.