What is the function of the button on the mirror of the Audi A6L?

How to align the timing belt on the new Santana?

Santana timing belt alignment method: 1. Align the marks on the timing belt pulley with the crankshaft, generally requiring the No. 1 cylinder piston to be at top dead center. 2. Install the camshaft timing belt pulley and align its marks with the camshaft. For dual camshafts, align both camshaft positions separately. 3. Install the timing belt/chain properly. Below is relevant information about timing belts: 1. The timing belt is a crucial component of the engine's valve system. It connects to the crankshaft and maintains precise intake and exhaust timing through a specific transmission ratio. Belts are used instead of gears for transmission because they produce less noise, have minimal self-variation, and are easier to compensate for. 2. Vehicle timing belts require regular replacement. Failure to inspect and replace a faulty timing belt in time may lead to severe consequences. The timing belt is often hidden behind a cover, and accessing it depends on the engine and engine compartment layout. However, in most cases, the cover on the timing belt, at least the upper part, can be removed or opened to allow careful inspection and belt replacement. 3. When inspecting the timing belt, if it does not appear well-maintained and properly tensioned, it should be replaced promptly.

14

1

Share

What is the working principle of the air supply system?

The working principle of the air supply system is: air passes through the intake channel and the air flow meter. The sensor of the air flow meter outputs a voltage signal under the action of airflow pressure and transmits this voltage signal to the ECU. The ECU determines the basic fuel injection quantity based on this signal and other signals such as engine speed. The function of the air supply system is to provide clean air for the engine and control the exhaust volume during normal operation. The air supply system consists of an air metering device, idle speed control valve, supplementary air valve, inertia supercharging intake system, throttle position sensor, intake temperature sensor, etc.

17

4

Share

How many days after applying car window film can you not open the windows?

After the car window film application is completed, avoid rolling the windows up and down for 3 days in summer and 7 days in winter. The reason is: the glass of a vehicle with newly applied film is usually tight, and during the process of opening and closing the windows, the edges of the film are very prone to curling and peeling, which can also cause displacement of the film that hasn't fully adhered, damaging the car window film. Here are some precautions after applying car window film: 1. Within a week after applying the film, park the vehicle in a sunny place to ensure the moisture inside the film fully evaporates; 2. Do not wash the car within three days after applying the film to avoid potential film detachment caused by water. Therefore, it's advisable to wash the vehicle thoroughly before applying the film; 3. After applying the rear window film, do not use the rear defogger for a week. Moisture that hasn't dried can adversely affect the defogger lines. Remember to turn off the defogger after use to prevent long-term high temperatures from causing bubbles or deformation in the film; 4. After application, you can clean the film surface with a wet towel, sponge, or soft cloth; 5. After applying the front windshield film, avoid directing the air conditioning towards the windshield for 7 days.

5

4

Share

How to Properly Use Car Airbags?

Correct usage methods for car airbags: 1. Airbags must be used in conjunction with seat belts; 2. Pay attention to the airbag warning light on the dashboard; 3. Airbags must be replaced after deployment; 4. Do not hang small ornaments or decorations on the windshield; 5. Avoid accidental impacts and vibrations; 6. Children and short-statured passengers should try to sit in the rear seats; 7. Do not place sharp or hard objects between passengers and the airbag. Airbags are only auxiliary safety systems. If seat belts are not worn, the driver or passengers may be propelled by tremendous inertia toward an incompletely inflated airbag, leading to additional accidents where the airbag may have a negative effect instead.

17

3

Share

Is it illegal to put stickers on a car?

It is illegal to put stickers on a car if they do not comply with regulations. The relevant regulations regarding illegal car stickers include: 1. Special colors such as red for firefighting, yellow for engineering rescue, and the white and blue combination for national administrative law enforcement are reserved for special vehicles and cannot be used on ordinary vehicles; 2. Stickers or advertisements sprayed or pasted on the car must not affect safe driving; 3. The area covered by stickers must not exceed 30%, otherwise, you need to apply for filing with the traffic management department. If the car stickers do not meet the above regulations, the car will not pass the annual inspection and may face a fine of 500 to 1000 yuan.

11

3

Share

Can Red Light Cameras Capture Violations on Rainy Days?

In general, as long as there are automatic monitoring devices installed at intersections for evidence collection, they will automatically capture violations when they occur. Criteria for Determining a Red Light Violation: The electronic eye captures three photos as evidence for determining a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. Penalty Points for Red Light Violations: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings results in a deduction of 3 points. How to Check for Red Light Violations: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Processing" option. Under "Violation Processing," you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check for violations at the service halls of local traffic police departments using touch-screen terminals. Alternatively, visit the official website of your local Public Security Bureau's Traffic Management Bureau, find the "Vehicle Violation Inquiry" section, enter your license plate number and engine number, and click "Query" to check.

16

4

Share

What is the function of the button on the mirror of the Audi A6L?

How to align the timing belt on the new Santana?

What is the working principle of the air supply system?

How many days after applying car window film can you not open the windows?

How to Properly Use Car Airbags?

Is it illegal to put stickers on a car?

Can Red Light Cameras Capture Violations on Rainy Days?

What are the components of a lubrication system?

What is the fuel consumption of the Mercedes-Benz S-Class?

Will There Be Issues If a Car Is Not Driven for Half a Year?

What to Do After 15 Years of Car Use?