What is the function of the balance weights on a Mitsubishi Pajero?

Do Car Spark Plugs Affect Engine Power?

Spark plugs have a direct impact on the power of a car engine. Faulty spark plugs can cause symptoms such as difficulty starting, low power, excessive exhaust emissions, and increased fuel consumption. Severely damaged spark plugs may exhibit phenomena like pitting at the top, black streaks, cracks, or melted electrodes. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance to assess its condition. A normal spark plug will have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing pitting, black streaks, cracks, or melted electrodes at the top, the cause of the damage should be identified, and the fault should be resolved before replacing the spark plug. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or that engine oil is leaking into the combustion chamber.

2

0

Share

Is Fuel System Cleaning Necessary for Maintenance?

Cleaning the fuel system is indeed necessary. Gasoline inevitably contains certain impurities, which generate carbon deposits in the combustion chamber over time. As these deposits accumulate, they can impair combustion efficiency, subsequently affecting engine performance and increasing fuel consumption. Issues such as poor fuel injector atomization, engine weakness, poor acceleration, and non-compliant exhaust emissions may arise. Below are the maintenance and cleaning procedures for the fuel system: 1. Regularly add a high-quality fuel system cleaner. Typically, cleaning should be performed every 10,000 to 20,000 kilometers. The cleaner effectively removes carbon deposits, sediments, and gum from the combustion chamber, intake valves, fuel injectors, and fuel lines while driving. Keeping the fuel system clean helps decompose moisture in the fuel and reduces harmful emissions. 2. Use specialized equipment for cleaning, such as a no-disassembly cleaning method that involves adding a cleaning solution through a supply device, commonly referred to as "hanging an IV bottle." This method allows for cleaning without disassembling the engine during operation, providing protection and effectively avoiding damage caused by disassembly. Most 4S shops adopt this approach.

9

5

Share

What is the difference between China 6a and 6b?

Here is an introduction to the differences between China 6a and China 6b: 1. For light-duty vehicle emission limits, the country has set two levels of requirements this time: the "China 6a" phase and the "China 6b" phase. "China 6a" is equivalent to a transitional stage between "China 5" and "China 6", while "China 6b" is the true "China 6" emission standard. 2. The emission standards for the "China 6a" phase are basically the same as those for "China 5", only taking the strictest values from the "China 5" emission requirements. The control of particulate emissions from vehicle exhaust has been tightened from 6*10^12 to 6*10^11. The emission standards for China 6b are almost twice as strict as those for "China 6a", and a more stringent "Real Driving Emissions (RDE) test" is adopted.

10

4

Share

What are the penalties for entering Beijing without a Beijing Entry Permit?

Driving within restricted roads without a Beijing Entry Permit will result in a fine and 3 penalty points. Below are the specific details about the Beijing Entry Permit: 1. Validity of the Beijing Entry Permit: Non-local vehicles entering within the 6th Ring Road of Beijing (excluding the main road of the 6th Ring Road) require this entry permit, which is valid for 7 days, or 3 days during special periods (such as the Olympics or National Day holidays). Failure to comply will result in a 3-point deduction and a fine. Entry permit offices are available on highways and national roads leading into Beijing. 2. Required documents for application: To apply for a Beijing Entry Permit, you need to provide the vehicle’s valid registration certificate, a green environmental compliance label or a vehicle exhaust inspection certificate issued by the local municipal environmental department, compulsory traffic insurance label, inspection compliance label, as well as the driver’s license, ID card (or household registration booklet), and other valid documents.

5

1

Share

Is SAIC Roewe a Domestic Brand or a Joint Venture Brand?

Roewe is a domestic brand. More details about Roewe are as follows: 1. Configuration: The power battery system of Roewe hybrid vehicles is independently innovated and developed by SAIC Motor with global resources. It surpasses ordinary standards in terms of power, safety, and lifespan. The lithium iron phosphate battery used is globally recognized as one of the safest and highest-performing lithium batteries. The battery system has undergone the most comprehensive working condition tests (NEDC, i.e., the New European Driving Cycle, including urban and highway conditions) and passed 32 rigorous safety, reliability, and durability tests at the component, system, and vehicle levels. Its superior quality makes it highly trustworthy. 2. System: Equipped with the DMS (Dynamic Damping System) active shock absorption and stabilization system, it achieves lightweight chassis design while perfectly balancing driving comfort, improving overall vehicle comfort by more than 10%.

10

5

Share

Is it allowed to overtake from the right side of a car?

Cars are not allowed to overtake from the right side, as it is considered illegal. Overtaking is prohibited under the following circumstances: 1. The vehicle ahead is turning left, making a U-turn, or overtaking. 2. There is a possibility of encountering oncoming traffic. 3. The vehicle ahead is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency duties. 3. Passing through railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or sections with heavy urban traffic where overtaking conditions are not met. Below is additional information on overtaking precautions: 1. Observe the road conditions: Before overtaking, check the road ahead and choose a flat, straight section if possible. Also, observe the lane you intend to use for overtaking by checking the left rearview mirror for any vehicles approaching from behind. Wait for the vehicle behind to complete its overtaking maneuver before proceeding. 2. Use of lights: When conditions permit, turn on the left turn signal, then alternately flash the high and low beams and sound the horn to alert the vehicle ahead. Once the vehicle ahead signals to yield, you can steer to the left. 3. Driving in the overtaking lane: If already in the overtaking lane, downshift and press the accelerator deeply to increase engine speed and boost power. The reason for downshifting is that when accelerating, downshifting provides a quicker throttle response, allowing for faster speed increase.

1

2

Share

What is the function of the balance weights on a Mitsubishi Pajero?

Do Car Spark Plugs Affect Engine Power?

Is Fuel System Cleaning Necessary for Maintenance?

What is the difference between China 6a and 6b?

What are the penalties for entering Beijing without a Beijing Entry Permit?

Is SAIC Roewe a Domestic Brand or a Joint Venture Brand?

Is it allowed to overtake from the right side of a car?

How many subjects are required to upgrade from C3 to C1?

Do I Need to Carry My Driver's License with Me?

How Many Years of Driving Experience Does Huolala Require?

Does BMW Transmission Fluid Need to Be Replaced?