What is the function of steel braided brake hoses on braking?

Can a car continue to drive if its sensor is broken?

If there is a problem with the car sensor, the car can continue to drive, but it is not recommended. The following is the relevant content introduction: 1. The sensor is an important intermediate medium connecting the transmission and the car engine and regulating the car speed. Without the sensor, the speed of the car transmitter cannot be normally transmitted to the car computer chip, so it cannot guarantee the self-adjustment torque of the transmission. If it cannot be adjusted, the transmission cannot work in the optimal way, which will aggravate the damage of the transmission. 2. If a sensor fails, in order to ensure the normal operation of the engine, the ECU will replace the parameters of the faulty sensor with the preset backup parameters to avoid vehicle breakdown.

15

0

Share

How to Cancel the Mercedes-Benz Tire Pressure Monitoring Indicator Light?

Method to cancel the Mercedes-Benz tire pressure monitoring indicator light: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation port. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure fault light. For sensor damage issues, the only solution is to replace it with a new component.

13

1

Share

Is the Volkswagen CC produced by SAIC or FAW?

CC is a model under FAW-Volkswagen. Here are the relevant details: 1. The CC is a mid-size sedan, sharing the same segment with models like the Passat and Magotan. The CC is a coupe-style sedan, featuring a very attractive exterior design and frameless doors. 2. The new CC is equipped with two types of engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine has a maximum power of 137 kW, a maximum torque of 320 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed range of 1600 to 4000 rpm. This engine features mixed injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission. The high-power 2.0-liter turbocharged engine has a maximum power of 162 kW, a maximum torque of 350 Nm, a maximum power speed range of 4500 to 6200 rpm, and a maximum torque speed range of 1500 to 4400 rpm. This engine employs direct fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. It is also paired with a 7-speed dual-clutch transmission. 3. The CC uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.

1

2

Share

How to Use a Mercedes-Benz Car Key?

Mercedes-Benz car key usage instructions: 1. Press and hold the lock button to close all windows and lock the car simultaneously. 2. Press and hold the unlock button to unlock the car and lower all windows at the same time. 3. Aim the key at the left front door handle of the car, keeping the distance within one meter, then press the lock button to automatically raise all windows and close the sunroof. 4. Pressing both the lock and unlock buttons together switches between two modes: one mode unlocks the entire car with a single press, while the other mode unlocks only the driver's side with a single press. For the trunk button, press and hold it longer to release.

19

2

Share

How to Judge the Distance of the Rear Vehicle Through the Interior Rearview Mirror?

The method to judge the distance of the rear vehicle through the rearview mirror is as follows: 1. When the rear vehicle is within the safe zone of the rearview mirror and positioned on the right side, it indicates a relatively large distance, allowing normal turning operations. 2. If the rear vehicle is in the center of the rearview mirror, it indicates a distance of approximately 15-20 meters, and normal turning operations can still be performed. 3. When the rear vehicle's body is close to the boundary between the safe zone and the danger zone, the distance is about 5 meters, and you should be more cautious. 4. If the rear vehicle's body has entered the left danger zone of the left rearview mirror, the distance is very close, and turning operations are not advisable. 5. When the rear vehicle occupies 1/4 of the right rearview mirror and the entire vehicle is visible, the distance is about 25 meters, and turning operations can be performed. 6. When the rear vehicle occupies 1/3 of the right rearview mirror, the distance is about 15 meters, and turning operations can be performed. 7. When the rear vehicle occupies half of the right rearview mirror and the entire vehicle is still visible, the distance is about 10 meters, and you can signal before turning. 8. If the rear vehicle occupies half of the right rearview mirror but only half of its body is visible, the distance is very close, and turning operations are not advisable. Note: The interior central rearview mirror can provide a rough estimate of the rear vehicle's distance. However, since the front height of sedans and SUVs varies, always make judgments based on actual conditions. If you can see the front wheels of the rear vehicle in the rearview mirror, the distance is about 15-20 meters; when you can see the rear vehicle's grille, the distance is about 6-8 meters; and when the grille is just out of sight, the distance is about 3 meters.

12

2

Share

Is it necessary to apply a car wrap for a new car?

It is necessary to apply a car wrap for a new car. Here are the relevant details: 1. The original factory paint on the car body is unique; if scratches occur later without an invisible car wrap, the touch-up paint used won't be the original factory paint, potentially leading to color discrepancies. 2. Advantages of applying a car wrap: New cars are prone to scratches due to unfamiliarity with the vehicle or poor driving skills. Applying an invisible car wrap can reduce the appearance of scratches, and small stones hitting the body while driving won't leave marks. The invisible car wrap contains a special material that can automatically repair itself to its original state when scratched by external objects.

15

1

Share

What is the function of steel braided brake hoses on braking?

Can a car continue to drive if its sensor is broken?

How to Cancel the Mercedes-Benz Tire Pressure Monitoring Indicator Light?

Is the Volkswagen CC produced by SAIC or FAW?

How to Use a Mercedes-Benz Car Key?

How to Judge the Distance of the Rear Vehicle Through the Interior Rearview Mirror?

Is it necessary to apply a car wrap for a new car?

How Long Does It Take to Change a Tire?

Where is the license plate number 'Liao J' from?

Is the spare tire of the Qashqai a full-size spare tire?

Is the Mazda Atenza a Front-Wheel Drive or Rear-Wheel Drive Car?