What is the function of refrigeration oil?

How to Turn the Steering Wheel When Using the Rearview Camera?

Here are the methods for turning the steering wheel while using the rearview camera: 1. Clearly observe the situation behind the car, identify the route, and estimate the distance. 2. To move the rear of the car to the left, turn the steering wheel to the left; to move it to the right, turn the steering wheel to the right. Ensure the front of the car won't hit any obstacles, and try to avoid pressing the accelerator while reversing, strictly controlling the speed. Here is some relevant information: 1. It's essentially the same principle as turning while driving forward. Additionally, it's important not to focus solely on the rear while reversing. After confirming the safety behind, intermittently check the rearview mirrors to monitor the distance from obstacles behind and on both sides, and use the steering wheel to adjust the car's position. 2. When correcting the car's position, if the rear is leaning to one side, steer in the opposite direction to correct it. For example, if the car is leaning left, move right to correct it by turning the steering wheel to the right.

14

5

Share

Are there electronic captures in tunnels?

Tunnels are equipped with electronic captures. The speed limit in highway tunnels is 60 to 80 kilometers per hour. Changing lanes or overtaking is prohibited while driving in tunnels due to the limited space and poor lighting conditions, which can easily affect the normal driving of other vehicles. Moreover, tunnels are now equipped with comprehensive camera capture systems, and illegal lane changes will result in a 3-point deduction and a fine. Relevant details are as follows: 1. Speed limit signs: When drivers see that they are about to enter a tunnel, they should observe the speed limit signs on both sides of the road in advance. If using navigation, it usually provides an early warning about the speed limit in the upcoming tunnel, prompting drivers to slow down and maintain a safe distance from the vehicle ahead. 2. Turning on headlights: Before entering a tunnel, drivers must turn on their headlights and keep them on until the vehicle has completely exited the tunnel. This is because the sudden dimming of light upon entering the tunnel can cause a temporary 'blindness' effect, making it difficult to adapt to the suddenly darkened environment. Therefore, headlights should be turned on before entering the tunnel to reduce visual conflicts.

10

4

Share

Why Can't the Baojun Key Start the Engine When It Can Unlock the Car?

Reasons why the Baojun key can unlock the car but cannot start the engine: the vehicle's anti-theft chip is malfunctioning; the transmitter on the vehicle key is damaged; or the receiver on the vehicle is damaged. You can first try using the spare key to start the vehicle. When approaching the car: When the driver brings the key in their pocket close to the car, the key and the car begin to exchange preset command information via radio. Subsequently, the car's locking system, security system, and engine control system are all activated. When opening the car door: As soon as the driver touches the door handle, the sensor detects this pressure, and the servo motor will unlock the door. Then, the seat, steering wheel, and exterior rearview mirror will automatically adjust to the position suitable for the owner. Before starting: When the driver steps on the brake pedal, the steering wheel lock will be released immediately. At the same time, the start button will also be released, and finally, the main brake will automatically disengage.

10

3

Share

What is the difference between 0w30 and 0w40?

These two types of engine oil have different viscosities, with 0w40 oil being more viscous. Here are the relevant details: 1. The 'w' in the oil model stands for 'winter,' indicating that the oil can be used normally in winter. The number before 'w' represents the oil's low-temperature fluidity. 0w means the oil can flow normally at -35 degrees Celsius, while 5w means it can flow normally at -30 degrees Celsius. The number after 'w' indicates the oil's high-temperature viscosity—the larger the number, the higher the viscosity. 2. Choosing the right viscosity of oil is crucial for the engine. If the viscosity is too low, it can increase engine wear. If the viscosity is too high, it can increase engine running resistance, leading to reduced power and higher fuel consumption. 3. Generally, naturally aspirated engines require 30-viscosity oil, turbocharged engines require 40-viscosity oil, and high-performance, large-displacement, multi-cylinder engines require 50-viscosity or 60-viscosity oil.

20

3

Share

What Are the Consequences of Not Replacing the Cabin Air Filter?

Failing to replace the cabin air filter in a timely manner will affect the airflow volume, and reduced airflow will diminish the air conditioning's cooling performance. Additionally, a dirty filter can breed bacteria and mold, which, when blown out, can harm health and even impair cooling efficiency. Below are relevant details: 1. The cabin air filter, commonly known as the pollen filter, serves the following purposes in a car's air conditioning system: (1) It filters the air entering the cabin from outside, improving air cleanliness. Typical filtered substances include impurities in the air, such as fine particles, pollen, bacteria, industrial exhaust, and dust. (2) It prevents these substances from entering and damaging the air conditioning system, ensuring a healthy air environment for passengers and preventing windshield fogging. 2. Poor maintenance of the cabin air filter can lead to the accumulation of dust and grime on components like the filter panel, radiator, evaporator, and fins, causing airflow blockage. This can result in reduced cooling and heating efficiency, increased power consumption, louder noise, and a shorter lifespan for the air conditioning system. More seriously, foul odors in the cabin can endanger the health of the driver and passengers. Prolonged exposure to such an environment may cause dizziness, nausea, or even respiratory illnesses.

5

0

Share

How fast can the BMW Z4 go?

The BMW Z4 has a top speed of 250 km/h. The BMW Z4 is a coupe model from BMW, with its design improved upon the Z3, featuring a long engine hood and very comfortable seats that almost rest on the rear axle. BMW Z4 Configuration: The engine it carries can be said to be BMW's most efficient inline-six engine to date. This N54-3.0-liter twin-turbocharged engine was replaced by the N55 twin-scroll single-turbocharged engine in the 2011 3 Series. Due to the addition of new electronic equipment, the N54 in the Z4-sDrive35is has an output power increase of 35 horsepower to 335 horsepower compared to the Z4-sDrive35i. Performance: The Z4 is equipped with a 2.5 or 3.0-liter inline-six engine, achieving 0-100km/h acceleration in 7.5 and 6.3 seconds respectively. The 3.0-liter model with the SMG sequential transmission accelerates in less than 6 seconds, with the manufacturer's stated figure being 5.9 seconds. Even under such extreme conditions, the engine runs very smoothly without any shaking. The power output is very uniform but lacks the excitement expected from a sports car engine.

10

3

Share

What is the function of refrigeration oil?

How to Turn the Steering Wheel When Using the Rearview Camera?

Are there electronic captures in tunnels?

Why Can't the Baojun Key Start the Engine When It Can Unlock the Car?

What is the difference between 0w30 and 0w40?

What Are the Consequences of Not Replacing the Cabin Air Filter?

How fast can the BMW Z4 go?

Is the Bentley Red Label V8 or V12?

What are the functions of the Bin Yue key?

What Type of Vehicle is a Tow Truck?

What are the characteristics of wool cone speakers?