···
Log in / Register

What is the function of LED daytime running lights?

4 Answers
StMaggie
08/29/25 3:16am

The function of daytime running lights is to make vehicles more easily recognizable during daytime driving. Their purpose is not to help drivers see the road clearly, but to signal the presence of the vehicle to others ahead during daytime. These lights are not illumination lamps, but rather signal lights. The primary benefit of daytime running lights lies not in aesthetics, but in enhancing vehicle visibility. Daytime running lights are installed on both sides at the front of the vehicle. Many countries have established relevant standards for daytime running lights to ensure they effectively enhance safety. The most representative regulation is ECE R79 in the European Economic Commission's automotive technical regulations. China also implemented the national standard "Photometric Characteristics of Automotive Daytime Running Lights" (released on March 6, 2009) starting from January 1, 2010. Below are detailed specifications of photometric characteristics: Photometric characteristics: The most important aspect of LED daytime running lights is their photometric performance. They must meet basic brightness requirements without being too bright to avoid disturbing others. Technically, this means the luminous intensity on the reference axis should not be less than 400cd, and the luminous intensity in other directions should not be less than the product of 400cd and the percentage at corresponding points in the light distribution diagram. In any direction, the luminous intensity emitted by the lamp should not exceed 800cd. Installation precautions: When selecting installation locations, try to avoid areas prone to high temperatures or water accumulation. During wiring installation, ensure the harness connector and daytime running light connector directions are correctly aligned to avoid mistakes.

Was this review help?
12
5
Share
DelSophia
09/10/25 7:56am

I've been driving for decades, and LED daytime running lights are literally a lifesaver. They make my car more visible during the day, especially in rainy weather or when going through tunnels. Other drivers can spot the outline from far away, reducing the risk of rear-end and side collisions. I've seen some statistics showing that cars equipped with these can reduce accident rates by over 30%. When driving on highways, I feel more at ease knowing that vehicles behind won't easily get too close. LEDs are also very energy-efficient, unlike old halogen lights that drain power and cause battery issues over time. Some regions even mandate their installation, and for good reason. When parking or moving slowly, these lights also alert pedestrians—practical and safe. I believe all car owners should take them seriously to avoid regretting an accident someday.

Was this review help?
4
2
Share
Expand All
DeBrooke
10/25/25 2:01am

I think LED daytime running lights are super cool, not only enhancing the appearance but also being extremely practical! I drive to and from work daily, and they automatically turn on when I start the car. The light strip at the front gives off a high-tech vibe. When daylight is insufficient, they make my position instantly noticeable to others, helping avoid blind-spot accidents. Whether I'm on the highway or city roads, I feel much safer. They're also energy-efficient—LED technology provides high brightness with low power consumption, so the battery lasts longer. Aesthetically, they elevate the overall premium feel of my car, resembling luxury brand designs. Even when parked temporarily at night without headlights, they provide some illumination. I recommend young car owners give them a try—you'll love them once installed.

Was this review help?
11
5
Share
Expand All
JaxsonFitz
12/08/25 2:24am

We installed LED daytime running lights mainly to save costs. They consume less power, are more fuel and electricity efficient than traditional bulbs, and the battery lasts several years without replacement, saving a considerable amount of money annually. Environmentally, they reduce carbon emissions and are eco-friendly. Safety-wise, they perform well too; during significant daytime light changes, the lights make the car more visible, reducing the chance of collisions. I've tested it a few times—cars with these lights are noticed from afar, especially on suburban roads. Such a safe, practical, and economical choice is definitely worth it.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

What does the auto button in a car mean?

The auto button in a car refers to the automatic function of the air conditioning. Function of the auto button: After pressing the auto button, the air conditioning will determine the temperature setting, whether to cool or heat, and the fan speed based on the data detected by the car's sensors. In comparison, automatic air conditioning is much more comfortable, and this is a feature commonly found in mid-range cars. Meaning of the window auto button: There is also an auto button in the window control section, which refers to the automatic operation of the windows. Normally, the driver needs to hold the window switch to open or close the window. However, with the auto window button, pressing the switch once will automatically complete the opening or closing of the window, without the need to hold the button.
11
5
Share

What is the installation direction of the parking diesel heater fuel pump?

The installation direction of the parking diesel heater fuel pump is with the oil outlet nozzle facing upwards, at an angle of approximately 15-35 degrees. Fuel pump installation alignment: The quality of the fuel pump installation has a significant impact on the smooth operation and service life of the pump. Therefore, the installation alignment must be carried out carefully and should not be done hastily. The suction pipe of the fuel pump should be short; The installation height, length, and pipe diameter should meet the calculated values, striving for brevity to reduce unnecessary losses (such as elbows, etc.), and ensuring that the pump does not exceed its allowable cavitation margin during operation. Fuel pump piping: The suction and discharge pipes of the fuel pump should have supports, and the pump should not bear the load of the pipes.
8
2
Share

How Many Days Does It Usually Take to Check for Red Light Violations?

Generally, it takes two to three days from the time a violation is captured until it is recorded, and it can take up to 13 working days at the longest to be checked. Types of Vehicle Violations: Vehicle violations refer to acts where motor vehicles violate the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines, vehicle impoundment, temporary suspension of the driver's license, revocation of the driver's license, cancellation of the driver's license, administrative detention, and criminal liability for offenses that constitute a crime. Methods to Check Vehicle Violations: You can find the vehicle violation information query section on your local public security website, or you can inquire at the vehicle management office or traffic police station. Bring your vehicle registration certificate and driver's license directly to the traffic police station in your urban district to check, and all violation items will be listed.
20
5
Share

What is the range of Huawei's car?

Huawei's car has a range of 1,000 kilometers. Exterior Design: The exterior design of Huawei's car is quite attractive, with an overall avant-garde styling. The rear of the vehicle features a full-width taillight design, exuding a sense of luxury. Interior: The Huawei SF5 maintains a minimalist style, equipped with a HUD head-up display, a 12.3-inch full LCD instrument panel, and a 17-inch central control screen, offering a three-screen interactive function that looks quite advanced. Powertrain: Huawei utilizes the Seres SEP200 motor + HUAWEI-DriveONE three-in-one motor drive, achieving a 0-50km/h acceleration in just 1.99 seconds and 0-100km/h in 4.68 seconds. With a full charge, the comprehensive range can exceed 1,000km.
9
2
Share

Where is the car center console located?

The center console refers to the control panel located on the right side of the steering wheel, in the middle front section of the cockpit. Introduction to A-pillar: The pillar between the windshield and the left front door is called the A-pillar. Normally, the driver's binocular overlap angle through the A-pillar is 5-6 degrees. From the perspective of driver comfort, the smaller this overlap angle is, the better, and the thinner the A-pillar is, the better. Introduction to B-pillar: The B-pillar, also known as the center pillar, is located between the front and rear doors. It bears pressure from two aspects: supporting the roof and withstanding the pressure from the front and rear doors. Additionally, some additional components, such as the front seat belts, are installed inside the B-pillar. Therefore, to better achieve force transmission, the B-pillar is usually designed to protrude outward.
17
3
Share

What does it mean when a car displays 'check exhaust system'?

When a car displays 'check engine emission system', it indicates an engine malfunction. Specific reasons: When engine problems occur, these faults generate a series of codes. After the ECU reads the fault codes, they appear as indicator lights on the instrument panel. Engine malfunction light on: If the engine emission warning light remains illuminated after the car has started, it suggests there may be an engine fault. If sensors are confirmed to be functioning normally, the primary cause of exhaust emission issues is typically carbon buildup. When vehicle carbon deposits reach a severe level, cleaning becomes necessary - this also serves as protection for the vehicle.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.