What is the function of car turn signals?

1 Answers
SamanthaLynn
07/30/25 5:07am
The function of car turn signals is: 1. To alert pedestrians or other vehicles of an upcoming turn; 2. On highways, to indicate the direction of overtaking or lane changing; 3. When flashing simultaneously, to indicate an emergency situation, alerting other vehicles to be cautious. Car lights refer to the lamps on a vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movements. Car lights are categorized by function into: 1. Low beam headlights; 2. High beam headlights; 3. Front position lights; 4. Front fog lights; 5. Rear position lights; 6. Reverse lights; 7. Brake lights; 8. Rear fog lights; 9. License plate lights.
Was this review help?
4
5
Share
More Forum Discussions

Is a 6-speed manual-automatic transmission an AT transmission?

6-speed manual-automatic transmission is not an AT transmission. Manual-automatic is a combination of manual and automatic transmissions. Since it simulates manual mode, it is equivalent to AMT (Automated Manual Transmission) in manual mode, while AT transmission is only an automatic transmission. 6-speed manual-automatic refers to a transmission that integrates six-speed manual and automatic modes, which is not necessarily an AT transmission. It could also be other types of transmissions, such as dual-clutch or CVT, as the structures of these three transmissions are completely different. Manual-automatic transmission is a transmission device that combines manual and automatic shifting functions, allowing the driver to freely adjust gears and RPM according to their subjective preference. AT is the abbreviation for Automatic-Transmission. AT transmission translates to hydraulic automatic transmission in Chinese. Hydraulic automatic transmissions achieve automatic shifting through a combination of hydraulic drive and planetary gears, mostly consisting of components such as a torque converter, planetary gear mechanism, shift actuator, shift control system, and shift operation mechanism.
8
3
Share

Will a Manual Transmission Car Stall If You Press the Brake Without Pressing the Clutch?

Pressing the brake without pressing the clutch will cause the car to stall. Below is an introduction to manual transmissions: Introduction to Manual Transmissions: A manual transmission (MT), also known as a manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve different speeds. Working Principle of Manual Transmissions: By using the shift fork, the transmission changes the gear ratio (tooth ratio) of the meshing gears, thereby altering the driving torque to adapt to different driving conditions. Since the torque converter in an automatic transmission has a limited range of torque conversion, multiple sets of planetary gears are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears according to changes in engine operation, achieving automatic gear shifting and torque conversion. However, the auxiliary automatic shifting mechanism cannot meet all driving needs, such as parking or reversing, so an intervention device—the manual shift lever—is included, marked with P (Park), R (Reverse), N (Neutral), and D (Drive). Additionally, there are extra gears labeled 2 and 1 within the Drive range for starting or climbing steep slopes.
11
4
Share

What Does Crossover Vehicle Mean?

Crossover vehicles refer to models that transcend traditional vehicle category boundaries by combining the advantages of different vehicle types. Initially, crossovers primarily denoted SUV models with sedan-like characteristics, but the term has since evolved to encompass freely combined configurations of sedans, SUVs, MPVs, and other vehicle types. The concept of crossover vehicles originated from sedan-style SUVs, gradually developing into arbitrary cross-combinations of sedans, SUVs, MPVs, and pickup trucks. These vehicles integrate the comfort and stylish appearance of sedans, the handling performance of SUVs, and the flexible spatial configurations of MPVs. Additionally, they maintain the excellent off-road capability and safety features of SUVs while offering significantly more interior space than traditional sedans. With continuous development, crossover vehicles have further diversified into subtypes including SAV (Sports Activity Vehicle), CDV (Car Derived Van), and VAN (compact van) models. The primary reason for the emergence of crossover vehicles stems from specific customer demands for specialized utility vehicles. The market required compact, agile models capable of transporting goods, particularly small-sized cargo.
18
3
Share

What are the methods for beginners to press the accelerator?

Methods for beginners to press the accelerator: Apply gentle force when pressing or releasing the accelerator pedal, ensuring a smooth and gradual motion. When starting the engine, avoid pressing the accelerator pedal all the way down; instead, slightly increase it above the idle speed. Detailed introduction to methods for beginners to press the accelerator: The operation of the accelerator pedal should use the right heel as a pivot point on the floor of the driver's compartment. The sole of the foot should gently press on the accelerator pedal, using the flexion and extension of the ankle joint to press down or release. It is recommended that drivers adjust the accelerator according to road conditions and actual needs. Choose an appropriate gear to ensure the engine operates mostly at medium speed and larger throttle openings for fuel efficiency. Precautions for beginners when pressing the accelerator: Releasing the clutch should be closely coordinated with pressing the accelerator, ensuring quick and agile movements. Select an appropriate gear to keep the engine running mostly at medium speed and larger throttle openings for fuel efficiency. Avoid wearing high heels, as they can interfere with pressing the accelerator and brake pedals. Additionally, high heels may cause the foot to slip off the pedal due to excessive force, leading to potential trouble or even ankle injuries.
4
2
Share

Does the BMW 3 Series Need to Turn on AC When Using the Heater?

When using the heater in the BMW 3 Series, there is no need to turn on the AC. AC stands for Air-conditioning, which is used for cooling. In the summer, pressing the AC button activates the compressor, which compresses air to blow cold air. However, in winter, the car needs warm air to raise the interior temperature to a comfortable level. The warm air is provided by the engine, which generates a significant amount of heat while running. This heat is simply directed into the air conditioning system, allowing warm air to be blown out through the vents, so there is no need to press the AC button. Using the heater in winter does not increase fuel consumption. The warm air comes from the engine's heat, which would otherwise be expelled outside the car. In a way, using the heater in winter can even reduce the load on other components, such as the engine's cooling system. However, it is important to note that you should not keep the heater on for too long in winter, as the engine's heat also produces harmful gases that can enter the cabin through the air conditioning system. Therefore, it is advisable to open the windows periodically to ventilate the car and minimize potential harm to the occupants.
17
3
Share

Why does a car repeatedly and automatically unlock for no reason?

The reason for the car doors automatically locking is due to the car's own settings or the central control settings. Precautions during vehicle operation are as follows: 1. Driving distance: When driving on the road, it is important to maintain a safe distance between vehicles. According to relevant tests, when braking suddenly at a speed of 100 km/h, even the best cars require nearly 40 meters of braking distance. Even if the speed during normal city driving may not reach 100 km/h, it is still impossible to guarantee that the vehicle can stop immediately and steadily. 2. Overtaking and lane changing: Novice drivers are generally hesitant to overtake. Different road sections and conditions require different driving methods for overtaking. If there are no special circumstances, try to overtake from the left side. 3. Strictly prohibit answering phone calls while driving: Answering phone calls while driving is a dangerous factor that can lead to accidents. Experiments have shown that a driver's attention can decrease by 20% to 70% during a call. Even if some vehicles are equipped with hands-free systems, if answering calls distracts the driver and reduces attention to the vehicle and surrounding environment, the risk of accidents inevitably increases.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.