What is the function of car interior atomization disinfection?

1 Answers
SanFinn
07/29/25 9:58pm
The functions of car interior atomization disinfection include: 1. Ozone disinfection: It can only remove odors for a short time and cannot substantially disinfect or sterilize; 2. Steam disinfection: It can play a certain role in sterilization, disinfection, and odor removal, but electronic components in the car are prone to malfunction after steam treatment; 3. Photocatalytic disinfection; 4. Comprehensive removal of harmful organisms and bacteria in all corners and gaps of the interior, improving the air quality of the car's interior. The car atomization disinfection machine can purify the air inside the car, eliminate odors, and make people feel refreshed and focused on driving. The disadvantages are the complex operation, overly long disinfection time, unsatisfactory results when the car is heavily polluted, and potential adverse effects on the car's electronic systems due to steam. Therefore, it is not widely used at present.
Was this review help?
8
1
Share
More Forum Discussions

What is the normal RPM for a new car during the break-in period?

The RPM for a new car during the break-in period depends on specific conditions: 1. Within the first 500km, keep the RPM below 2,300; 2. From 500 to 1,000km, maintain the RPM under 3,000; 3. From 1,000 to 1,500km, do not exceed 3,500 RPM. Precautions during the car break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Prevent overloading; 4. Avoid long-distance trips; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears promptly; 9. Properly adjust the ignition and fuel supply systems.
3
4
Share

What does NORMAL mean on a car?

NORMAL is the standard driving mode. Below are the specific introductions to car driving modes: 1. NORMAL mode: Achieves the optimal balance between fuel economy and power performance. Suitable for city driving. 2. SPORT mode: Controls the transmission and engine for quick and powerful acceleration. This mode also alters the steering feel, making it suitable for situations requiring agile driving responses, such as driving on winding roads. When Sport mode is selected, the "SPORT" indicator on the multi-information display will light up. 3. ECO mode: Helps the driver accelerate in an environmentally friendly manner and improves fuel economy through moderate throttle characteristics and control of the air conditioning system operation (heating/cooling). When Eco mode is selected, the "ECO-MODE" indicator on the multi-information display will light up. When the air conditioning is in use, the system automatically switches to the air conditioning eco mode for better fuel economy.
16
1
Share

What are the reasons for the high fuel consumption of the FAW J6P?

The reasons for the high fuel consumption of the FAW J6P may include faults in the electronic control system, severe engine carbon deposits, or issues with the carburetor. Below are some related tips for reducing fuel consumption: 1. Good driving habits: Smooth starts, gradual acceleration, gently lifting the throttle, and reducing braking can significantly help in lowering fuel consumption. When starting, ensure it is smooth and not too abrupt. On winding and undulating roads, reduce speed and minimize braking frequency, which aids in reducing fuel consumption. 2. Mastering driving techniques: Maintain proper tire pressure and appropriate tire tread area to reduce wind resistance. When driving in traffic, avoid sudden braking. Accelerate before climbing a hill to utilize inertia for the ascent, among other techniques.
10
1
Share

What Are the Reasons for a Car Starter Not Starting?

Reasons for a car starter not starting: 1. Insufficient battery power; 2. Poor contact of the ignition switch; 3. Faulty starting circuit, etc. Solutions: Most cases are caused by a depleted battery. You can first observe the dashboard, check the brightness of the headlights, the sound of the horn, and the battery discharge inspection hole to determine if it's a battery issue. Below is an introduction to the starter and the engine: 1. Starter: It converts the battery's electrical energy into mechanical energy, driving the engine flywheel to rotate and start the engine. Before the engine can run on its own power, it must rely on external force to rotate. 2. Engine: The process by which the engine transitions from a stationary state to self-operation with external assistance is called engine starting. Its working principle is based on Ampere's law, a process of energy conversion where a current-carrying conductor experiences force in a magnetic field.
15
1
Share

What is the method for adjusting a motorcycle chain?

Adjusting a motorcycle chain involves the following steps: 1. Lift the rear wheel of the motorcycle; 2. Loosen the transverse screw in the middle of the rear wheel; 3. Release the fixing bolts of the adjustment screws on both sides; 4. Turn the adjustment screws backward a few turns and then tighten them; 5. Observe the tightness of the chain while adjusting, and ensure both sides are evenly adjusted once the desired tightness is achieved. Precautions for adjusting a motorcycle chain include: 1. Apply lubricating oil after each cleaning, wiping, or solvent washing of the chain; 2. Ensure the chain is dry before applying lubricating oil. A motorcycle chain is a component of a motorcycle and can be categorized by structure into: 1. Motorcycle sleeve chains; 2. Motorcycle roller chains; 3. Motorcycle sealed chains; 4. Toothed chains.
17
2
Share

Why is a diesel car slow to accelerate and weak when going uphill?

Here is the relevant introduction about why a diesel car is slow to accelerate and weak when going uphill: 1. Reasons for slow acceleration and uphill weakness in diesel cars: such as water in the fuel system, causing incomplete fuel combustion; excessive carbon deposits adsorbing part of the fuel, leading to abnormal air-fuel mixture ratio and incomplete combustion; severe wear of pistons, piston rings, and cylinders causing increased clearance between them, reduced sealing performance, cylinder head leakage, and lower cylinder compression pressure, etc. 2. Advantages of diesel cars: Modern diesel cars have significantly improved power and greatly reduced noise compared to earlier models, providing a noticeably more comfortable driving experience. The application of automotive power self-diagnosis technology makes the fuel injection timing of electronically controlled fuel injection cars more precise, with less noise. Intercooled turbocharging ensures more complete fuel combustion, and due to the inertia of the turbocharger, the faster the car runs, the more fuel-efficient it becomes, resulting in stronger power.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.