What is the function of automotive lenses?

How to Solve the Problem of Fast Blinking Turn Signals?

Turn signals blinking too fast can be resolved by: 1. Checking if the flasher relay is functioning properly. Use a multimeter to measure the output line of the flasher relay to see if there is a 12v output; 2. Inspecting the bulb and its socket for poor contact; 3. Verifying if the bulb's wattage is too high, and replacing it with one that meets specifications. Turn signals are a fundamental component of a vehicle's safety functions and play a crucial role in safe driving. Therefore, during maintenance and care of turn signals, pay attention to: 1. Avoiding low-quality bulbs, as the performance of the bulb is vital since it affects usage effectiveness and driving safety; 2. Performing regular maintenance. If the brightness of the lights is insufficient or they are damaged, replace or repair them promptly; 3. Conducting routine checks. During annual inspections, the performance and condition of the lights will be tested.

8

3

Share

How long does it take to register a new car?

New car registration usually takes about 2 to 15 days. Registration refers to the official license plate application process. The registration process includes: Purchasing the vehicle; Obtaining the purchase invoice from the 4S store; Paying the vehicle purchase tax; Completing registration procedures and selecting a license plate number at the vehicle management office; Receiving the license plate. The time required for license plate issuance varies significantly depending on the selection method. New car license plate registration methods include: Online self-selection, which requires mailing from the vehicle management office and typically takes 7 to 15 days; On-site self-selection, where the license plate can be issued immediately after selection. If the registration process is incomplete, a temporary license plate can be obtained. It's important to note that while there's no fixed deadline for registration, the vehicle purchase tax must be paid within two months. Late payment will incur penalties, and registration can only proceed after the purchase tax is paid.

4

3

Share

Will points be deducted for taking both hands off the steering wheel?

Taking both hands off the steering wheel will not result in point deductions. However, violating road traffic safety laws and regulations regarding road traffic rules will incur a fine of 200 yuan. Motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules will receive a warning or a fine ranging from 20 to 200 yuan. Common traffic violations include: 1. Speeding: Penalties - For speeding over 50%, 12 points will be deducted, a fine of 2000 yuan will be imposed, and the driver's license will be revoked; for speeding between 20% and 50%, 6 points will be deducted and a fine of 200 yuan will be imposed; for speeding under 20%, 3 points will be deducted and a fine of 200 yuan will be imposed. 2. Running a red light: Penalty - 6 points deducted and a fine of 200 yuan. 3. Illegal parking: Penalty - No points deducted, but a fine of 200 yuan. 4. Not wearing a seatbelt: Penalty - 2 points deducted and a fine of 200 yuan for the driver; a fine of 5 to 20 yuan for the passenger. 5. Using a phone while driving: Penalty - A fine ranging from 20 to 200 yuan and 2 points deducted.

13

5

Share

Does Starting the Car and Turning on the AC Damage the Vehicle?

Starting the car and turning on the AC does not cause significant harm to the vehicle. However, it poses certain risks to people. When the car is in motion, the carbon monoxide produced dissipates or disappears due to rapid air convection. But in idle conditions, even outdoors, if there is no wind, carbon monoxide can accumulate around the car, increasing in concentration over time. At this point, if the car is set to external air circulation, a large amount of carbon monoxide from outside could be drawn into the vehicle, leading to carbon monoxide poisoning. Additional Information: Common Misconceptions About Car AC Usage: 1. High AC Settings Consume More Fuel; Many car owners believe that setting the AC to maximum consumes more fuel, so they keep it low. While saving fuel is good, the car AC can accumulate dust over time, forming grime that may mold. If the AC is kept at low settings for too long, it becomes difficult to blow out the dust and grime from the air ducts, which can then affect the health of passengers. The correct approach is to occasionally set the AC to maximum for a few minutes to blow out the dust. Additionally, regularly clean the AC ducts and replace the air filter. 2. Smoking in the Car with AC On: Many smokers enjoy smoking in the car with the AC on, thinking it quickly disperses the smoke. However, this is equivalent to continuously inhaling secondhand smoke. If smoking in the car is unavoidable, always open the windows or set the AC to external circulation for ventilation. 3. Setting the AC Too Low: In hot summer weather, many car owners prefer to set the AC very low upon entering the car. Prolonged exposure to low temperatures can cause various discomforts, such as leg pain, general fatigue, chills, headaches, sore throat, abdominal pain, backache, and nerve pain in the limbs. 4. Random AC Airflow Direction: Adjusting the AC airflow direction randomly can affect the car's interior temperature. If the cold air is directed toward high-temperature components that don't need cooling, it counteracts the cooling effect, making it ineffective. 5. Keeping Internal Circulation On for Too Long: To save energy, many car owners keep the AC in internal circulation mode, which reduces compressor usage and fuel consumption. However, prolonged use can lead to stale air, reduced oxygen levels, and symptoms like dizziness or even hypoxia among passengers. 6. Avoid Running the AC While Parked: Running the AC while parked is dangerous because, during idling or low speeds, gasoline does not burn completely, producing carbon monoxide. If the AC is in external circulation mode, it can draw this carbon monoxide into the car, risking poisoning. This is especially hazardous in traffic jams, where the AC intake may align with the exhaust of the vehicle ahead. Therefore, it's best to switch to internal circulation mode during traffic jams.

2

Share

What materials should be brought for the first car maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Bring these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven, with specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven at standard loads and normal speeds as required. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normal levels, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most crucial aspect of the first maintenance for a new car is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle User Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. Water that enters will not dry naturally but will flow through these holes to areas like the transmission, causing corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the car's antifreeze is low, it is recommended to drain the existing antifreeze and add the same brand from the start. Different brands of antifreeze have varying chemical properties. The corrosion inhibitors in one brand may corrode those in another. Do not mix different brands of antifreeze to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, it is common to oil them to restore functionality. However, some people apply lubricant to the bolts and nuts to prevent rust, which can pose safety risks. At high speeds, bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car differs from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

11

4

Share

How to Adjust Vehicle Pulling to the Right?

Vehicle pulling to the right can be adjusted through wheel alignment. During driving, collisions are inevitable, and after the tires are impacted, the wheel alignment may deviate slightly. The supporting components of the car's chassis may also undergo minor deformations due to bumps or vibrations. Wheel alignment is an effective method to address vehicle pulling. Wheel alignment is based on the four-wheel parameters of the vehicle, ensuring optimal driving performance and reliability through adjustments. The installation of the steering wheels, steering knuckles, and front axle in a car has specific relative positions. This installation with defined relative positions is called steering wheel alignment, also known as front wheel alignment.

5

3

Share

What is the function of automotive lenses?

How to Solve the Problem of Fast Blinking Turn Signals?

How long does it take to register a new car?

Will points be deducted for taking both hands off the steering wheel?

Does Starting the Car and Turning on the AC Damage the Vehicle?

What materials should be brought for the first car maintenance?

How to Adjust Vehicle Pulling to the Right?

How to Confirm ETC is Working Properly?

How to Solve Car Audio Problems?

How to Follow a Car Slowly for Beginners?

How Soon Can a New Car Go on the Highway?