What is the function of ATF oil?

How to Remove the Rear Cargo Cover of Baojun 510?

Baojun 510 rear cargo cover removal method: Press the end caps of the cargo cover retractor toward the center to remove the cover from the vehicle. Taking the 2021 Baojun 510 as an example, it is a compact SUV with body dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, a wheelbase of 2550mm, a fuel tank capacity of 45 liters, and a curb weight of 1206kg. The 2021 Baojun 510 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum torque of 135Nm, and a maximum power of 73kW, paired with a 6-speed manual transmission.

104

Share

What is the fuel tank capacity of the Binyue?

The fuel tank capacity of the Binyue 2021 1.4T DCT Platinum Edition is 45L. It is equipped with a 1.4L turbocharged engine and a 6-speed wet dual-clutch transmission (DCT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. Among vehicles in the same class, the Binyue 2021 1.4T Manual Gold Edition also has a fuel tank capacity of 45L, while the Changan CS35 PLUS 2021 Glory Million Edition 1.6L Manual Elite has a fuel tank capacity of 53L. During actual refueling, the amount of fuel added may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to accommodate fuel expansion due to rising temperatures without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount added may exceed the nominal capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (Empty) and F (Full). When the needle is close to E, it indicates low fuel, while near F means the tank is sufficiently full.

104

Share

How to Retake the Driving Test After License Revocation?

To retake the driving test after license revocation, you can reapply once the revocation period expires. This process is treated as an initial application for a motor vehicle driver's license. You need to bring the applicant's identity proof and a medical certificate issued by a county-level or higher medical institution (or a military regiment-level or higher medical unit) to the vehicle management office to fill out an application form. After submission, the office will arrange the examination. A driver's license, also known as a driving permit, is officially called a motor vehicle driver's license. It is a legally required certification that motor vehicle operators must obtain. Driving a motor vehicle requires specific skills, and drivers lacking these skills may cause traffic accidents if they operate vehicles without proper training.

118

Share

When does the ABS system activate?

ABS system activates when wheels lock up during emergency braking. Functions of ABS system: Maximize braking efficiency, shorten braking time and distance; effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; allow steering during emergency braking, maintaining good steering control; avoid severe friction between tires and ground, reducing tire wear. Working principle of ABS system: During braking, ABS closes the normally open input solenoid valve for wheels that begin to lock based on speed signals from each wheel speed sensor, maintaining constant braking force. If wheels continue to lock, it opens the normally closed output solenoid valve. This keeps braking at optimal conditions, achieving best braking performance and maximum driving safety.

102

Share

How to Park a Car with Push-Button Start?

Parking steps for a car with push-button start are: 1. Press the brake pedal to bring the car to a smooth stop, keeping the brake pedal pressed throughout the parking process; 2. Shift the gear to N (Neutral) and engage the handbrake; 3. Shift the gear to P (Park); 4. Release the foot brake and press the push-button start to turn off the power, completing the parking process. Starting steps for a push-button start car: 1. After the driver sits in the driver's seat, press the push-button start once to turn on the ACC (accessory) light, then press it again for the vehicle self-check; 2. Press the brake pedal and push the start button to ignite the engine; 3. Keep the brake pedal pressed, shift to D (Drive), and release the handbrake; 4. Gradually release the foot brake, apply some throttle, and the car will start moving.

120

Share

What is the activation code for the Audi A3 ambient lighting?

Audi A3 ambient lighting activation code is 5053. Interior ambient lighting can make the cabin more dazzling at night, enhance the atmosphere, and create indoor ambiance. The relevant introduction to ambient lighting is as follows: Introduction to Ambient Lighting: Interior ambient lighting is a decorative lighting lamp, usually with red, blue, green, or other colors. However, it should be noted that the light color should not affect the driver's normal and safe driving. Function of Ambient Lighting: To a certain extent, it can serve as lighting, but mainly for decorative purposes; ambient lighting in high and low trim models may differ, mainly in terms of area and effect; the layout positions of ambient lighting are generally near the footwell, center console, door armrests, etc.

102

Share

What is the function of ATF oil?

How to Remove the Rear Cargo Cover of Baojun 510?

What is the fuel tank capacity of the Binyue?

How to Retake the Driving Test After License Revocation?

When does the ABS system activate?

How to Park a Car with Push-Button Start?

What is the activation code for the Audi A3 ambient lighting?

How Much Horsepower Does a 1.5T Car Have?

What Causes Abnormal Noise When Accelerating the Engine?

How to align the camshaft on a Ford Focus?

What does the vehicle VIN code mean?