What is the function of an air compressor?

What does the AFS-OFF warning light flashing mean and how to fix it?

Press the AFS-OFF switch 8 times, then wait for 2 seconds. Turn the steering wheel all the way to the left or right, then press the AFS-OFF switch twice. The indicator light will illuminate for approximately 2 seconds, then start flashing. Then the AFS-OFF indicator light starts flashing again, turn the steering wheel all the way to the opposite direction. The AFS-OFF indicator light starts flashing again, return the steering wheel to the center position, then press the AFS-OFF switch twice. The indicator light will turn off after approximately 2 seconds.

7

0

Share

What is the Sportage?

The Sportage is a Kia vehicle. The Sportage is a compact SUV equipped with the following engine options: 1. A 2.0-liter naturally aspirated inline four-cylinder engine with a maximum horsepower of 142 hp and a maximum torque of 184 Nm; 2. A 2.7-liter naturally aspirated V6 engine with a maximum horsepower of 175 hp and a maximum torque of 241 Nm. Taking the 2013 Sportage 2.0-liter manual two-wheel-drive version as an example: the body dimensions are 4760mm in length, 1907mm in width, and 1700mm in height, with a wheelbase of 2630mm, a maximum horsepower of 141 hp, a maximum power output of 104 kW, and a maximum torque of 184 Nm.

13

0

Share

Which is More Harmful to the Car: Heavy or Light Acceleration?

Between heavy acceleration and light acceleration, light acceleration is more harmful to the car. Light Acceleration: When a car is driven at low speeds for extended periods, incomplete combustion can occur, leading to carbon buildup. If the accelerator is pressed lightly over a long time, it can increase carbon deposits in the car, which may eventually cause significant issues with the engine. Additionally, mismatched speed and gear can also lead to similar problems. Heavy Acceleration: Full combustion reduces carbon buildup, thereby protecting the engine. Therefore, driving at high speeds helps clean carbon deposits more quickly. Although heavy acceleration might have some impact on the throttle, compared to engine damage, such effects are relatively minor.

12

2

Share

How Often Should the Combustion Chamber Carbon Deposits Be Cleaned?

Engine combustion chamber carbon deposits are generally cleaned every 2 years or approximately 40,000 kilometers. Below are the relevant details: 1. Function: The combustion chamber is a device where fuel or propellant burns to generate high-temperature gases. It is a combustion apparatus made of high-temperature-resistant alloy materials, forming the space between the piston top and the cylinder head when the piston reaches the top dead center. Fuel burns in this chamber. 2. Hazards: Over time, carbon deposits accumulate in the intake tract, valves, and combustion chamber. These deposits absorb fuel when the engine is cold and release fuel when the engine is hot, leading to difficulties in cold starts and higher fuel consumption when the engine is warm. This results in degraded engine performance, manifesting as idle shaking, poor acceleration, increased fuel consumption, and excessive exhaust emissions.

12

0

Share

How Many Liters is 1 Jin of Gasoline?

Jin and liter are not universal units, so direct conversion is not possible without knowing the density. The density of gasoline varies slightly depending on seasonal climate, with average values as follows: 1. The average density of 90-octane gasoline is 0.72g/ml; 93-octane gasoline has a density of 0.725g/ml; 97-octane gasoline has a density of 0.737g/ml; -20 diesel has a density of 0.83g/ml. 2. This means: on average, 1 jin of 90-octane gasoline is approximately 0.695 liters; 1 jin of 93-octane gasoline is approximately 0.690 liters; 1 jin of 97-octane gasoline is approximately 0.678 liters; and 1 jin of -20 diesel is approximately 0.602 liters.

14

1

Share

What is the reset method for the Fit's electronic power steering?

After entering the driver's seat, press the brake with your left foot, turn the key to the second position, and the engine will enter the self-check procedure. Wait a few seconds before starting the engine. After starting the engine, turn the steering wheel one full turn to the right in place, being careful not to turn it to the limit to avoid damaging the steering gear. Then turn it one full turn to the left. Once the steering wheel is centered, connect a computer to the vehicle's OBD port to read the fault codes. After troubleshooting and resolving the issues based on the fault codes, clear them. Finally, enter the PIN code to complete the electronic power steering reset for the JAC Refine S3, and you will notice a significant difference in driving performance compared to before.

17

0

Share

What is the function of an air compressor?

What does the AFS-OFF warning light flashing mean and how to fix it?

What is the Sportage?

Which is More Harmful to the Car: Heavy or Light Acceleration?

How Often Should the Combustion Chamber Carbon Deposits Be Cleaned?

How Many Liters is 1 Jin of Gasoline?

What is the reset method for the Fit's electronic power steering?

What are the body dimensions of the Hongqi HS5?

What Causes a Sudden Increase in Fuel Consumption for China V Diesel Vehicles?

What are the causes of abnormal noises in the Jiefang cab?

How to Turn Off ECO Mode in Toyota Vios?