What is the function of a throttle accelerator?

2 Answers
VonAndrew
07/28/25 7:43pm
Here is an introduction to the functions of a throttle accelerator: 1. Amplify throttle signal to increase speed and improve dynamic response: When the accelerator pedal is pressed, the accelerator calculates the rate of change of the throttle signal based on the depth and duration of the press. The faster the change, the stronger the acceleration demand. The throttle accelerator will amplify this rate of change, ultimately achieving better dynamic response during acceleration. 2. Provide a virtual driving style for the ECU to adjust engine parameters: Modern engine ECUs generally have adaptive driving style capabilities. If the driver frequently presses the accelerator pedal quickly and deeply (commonly known as revving), the ECU will gradually assume the driver's style tends to be "aggressive." As a result, the engine will slowly adjust parameters such as the throttle and fuel injection system to achieve optimal performance under this driving style. After installing an electronic throttle accelerator, even if the driver maintains a previously "gentle" driving style, the engine will still experience an "aggressive" driving feel, effectively deceiving the ECU. Over time, the engine will automatically modify its parameters to adapt to this style.
Was this review help?
8
3
Share
LeJack
08/12/25 12:38am
Having driven for many years, I've gained deep personal experience with throttle accelerators. Simply put, they make the throttle response faster - you step on it and the power comes instantly, unlike the sluggish response of older systems. In vintage cars particularly, throttle lag can be extremely frustrating, especially during highway overtaking or hill climbing. Installing this accelerator brings instant response, making the car feel alive again. You can even set different modes according to driving preferences - comfort mode for smoother response or sport mode for more aggressive acceleration, resulting in more fluid transitions. It's tremendously helpful for daily commuting. However, beginners should be cautious with overly sensitive modes to avoid losing control, and professional installation is recommended - don't tamper with wiring recklessly. Don't expect fuel savings either - faster response might lead to heavier footwork and slightly increased consumption, but overall driving experience improves significantly, especially in mountainous areas. All in all, it's quite effective for enhancing driving pleasure and worth the investment.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What is the Impact of Tire Performance on Vehicle Driving?

The impact of tire performance on vehicle driving lies in support and handling, with specific details as follows: Support Function: Supports the total mass of the vehicle and withstands various forces from the road surface, including vertical reaction forces, lateral reaction forces, and tangential reaction forces. Absorbs and mitigates part of the impacts and vibrations encountered during driving, ensuring the vehicle has good ride comfort and smooth driving. Enhancing Handling: Ensures good adhesion between the tire and the road surface to improve the vehicle's dynamic performance, maneuverability, and off-road capability. The structure and performance of the tire itself also directly affect the vehicle's safety inspection and economy.
2
2
Share

Why does the Audi A3 shake at idle when waiting at a red light?

Audi A3 shaking at idle when waiting at a red light may be caused by engine intake pipe leakage, fuel system blockage or malfunction, or idle control valve failure. Engine intake pipe leakage: The intake system contains many intake manifolds and various valves. If there is a leak, it can cause the concentration of the air-fuel mixture in the intake manifold to become too high or too low, leading to intermittent engine shaking or weak idle. Fuel system blockage or malfunction: Blockages in areas such as the fuel tank vent hole or certain fuel lines can prevent the engine from receiving the appropriate amount of fuel during idle, resulting in a lean air-fuel mixture, weakened engine power output, and idle shaking. Idle control valve failure: The idle operation of fuel-injected engines is mostly controlled by the idle control valve. The ECU adjusts the opening of the idle control valve based on signals such as engine speed, temperature, and throttle position to maintain stable engine idle. If the valve fails, it can cause uneven air distribution, fluctuating idle power, and vehicle shaking.
18
1
Share

How Many Types of Brake Water Spray Devices Are There?

1.5-2 atmospheric pressures are sufficient. Brake system maintenance can be carried out from the following aspects: 1. High-temperature protection for brake pads: Prevent corrosion in the brake system, avoid brake pad seizure due to high temperatures, eliminate brake pad squealing, and maintain good long-lasting lubrication. Products containing ceramic components that can withstand temperatures above 1400°C are required. Therefore, regularly check the thickness of the brake pads or brake shoes. Replace them immediately when their thickness approaches or falls below the manufacturer's specified minimum thickness. 2. Brake caliper lubrication maintenance: Lubricate the moving shafts and rubber cups of the brake calipers, keep the caliper bushings soft, and extend the caliper's service life. Fully synthetic brake caliper lubricant should be used. 3. Brake disc cleaning: Quickly clean oil stains, dirt, and friction dust from brake discs, brake drums, and any other parts to maintain good heat dissipation of the brake discs; eliminate harsh brake noises and promote even braking. 4. Brake fluid replacement: Brake fluid has water-absorbing properties. If not replaced for a long time, it can corrode the braking system, posing a hazard to driving. Generally, it is recommended that owners replace the brake fluid every 20,000 kilometers, mainly to ensure the cleanliness of the brake fluid. 5. Anti-rust lubrication for tire bolts, brake discs, and wheel rim contact surfaces: Prevent corrosion and bolt seizure due to heat, facilitate disassembly, and use products containing aluminum components that can withstand temperatures above 1100°C to ensure contact area with the brake pads and improve braking force.
11
0
Share

Is it okay to sleep overnight on the highway with ETC and exceed the time limit?

Sleeping overnight on the highway with ETC and exceeding the time limit has no impact. However, it is important to note that when resting at a highway service area, you should keep the service area invoice or payment receipt. In such special circumstances or if there are any transactions at the service area, you can present the receipt to the highway staff when preparing to exit the highway and explain the situation. After understanding and verifying the situation, the staff will usually let you pass without charging any overtime fees. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid, Please Insert Card," indicating that the device is functioning normally. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then, peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon solution, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
3
4
Share

What brand is Geometry car?

Geometry is a brand under Geely Auto Group, positioned as a premium pure-electric vehicle brand. Taking the 2019 Geometry A as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4736mm in length, 1804mm in width, and 1503mm in height, with a wheelbase of 2700mm. The 2019 Geometry A is equipped with a 164-horsepower permanent magnet synchronous motor and a single-speed transmission for electric vehicles. The front motor delivers a maximum power of 120 kW and a maximum torque of 250 N·m. It features front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
9
3
Share

Is driving over a yellow dashed line considered going against traffic?

Vehicles crossing a dashed yellow line are not considered to be going against traffic. Motor vehicles and non-motor vehicles in China are required to drive on the right side. According to this legal regulation, driving on the left side of the road constitutes "going against traffic." Relevant explanations are as follows: On roads with solid dividing lines, motor vehicles entering the opposite lane are considered violations. Among these, roads with double solid lines or single solid lines as dividers must not be crossed under any circumstances. On roads with dashed dividing lines, lane changes for overtaking are permitted when safe, but in the event of an accident, the vehicle changing lanes will be deemed to be going against traffic. On roads marked with one-way signs, any motor vehicle entering is considered to be going against traffic. During driving, yellow lines should be treated like walls; they must never be touched. However, typically, crossing the yellow line when exiting an intersection is not penalized because it usually does not trigger traffic cameras. But crossing the yellow line when entering an intersection will trigger the opposite intersection's traffic cameras and result in penalties.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.