What is the function of a car's cabin air filter?

What to Do When the Tiguan Hood Won't Close?

If the hood won't close, it may be because the release handle inside the cabin is stuck and hasn't returned to its original position, or the lock mechanism is rusted or obstructed by foreign objects. Reasons for the engine hood not closing include the hood cable not retracting, deformed hood lock, loose lock mechanism screws causing the lock to lower, lock mechanism displacement, or broken latch hook.

7

0

Share

Is Infiniti a Joint Venture or Imported Vehicle?

Infiniti offers both imported models and domestically produced models, which fall under the joint venture category. Here are the relevant details: 1. Infiniti Models: In the domestic market, production and sales are managed by Dongfeng Infiniti. The brand is one of the most significant automotive brands in the market. 2. Design Features: Infiniti is a luxury vehicle brand under Nissan Motor Company. With its unique avant-garde design, exceptional product performance, and thoughtful customer service, Infiniti quickly became a globally recognized luxury imported car brand. Dongfeng Infiniti is a joint venture established by Dongfeng Motor Corporation and Nissan Motor Company with a 50:50 equity ratio. Under the principles of "one strategy, one brand, one team, one channel," Dongfeng Infiniti independently operates the Infiniti brand.

17

2

Share

How Often Should the Coolant in a Mercedes-Benz Be Replaced?

For Mercedes-Benz A-Class, B-Class, and C-Class models, the coolant replacement interval is 40,000 kilometers or two years; for other models, it is 60,000 kilometers or three years. Below is relevant information about coolant: 1. Introduction: Coolant, fully known as antifreeze coolant, refers to a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and expanding during cold seasons, which could crack the radiator and damage the engine cylinder block. 2. Composition: Coolant consists of three parts: water, antifreeze, and additives. Based on the antifreeze component, it can be categorized into alcohol-based, glycerol-based, ethylene glycol-based, and other types of coolant.

17

0

Share

What are the reasons why BAIC vehicles fail to start?

There are several reasons why a BAIC vehicle may fail to start: 1. Battery depletion: The vehicle cannot start due to insufficient battery power, typically manifested by the starter not working or rotating noticeably slower when attempting to start. 2. Fuel flow obstruction: This is generally characterized by a lack of oil pressure in the engine's fuel supply line. At extremely low temperatures, water mixed with debris can block the fuel line, preventing the engine from starting. 3. Poor ignition system performance: In cold weather, the low intake temperature leads to inadequate fuel atomization in the cylinders. If combined with insufficient ignition energy, this can result in cylinder flooding—where excessive fuel accumulates in the cylinder, exceeding the ignition concentration limit and preventing the engine from starting.

15

4

Share

Does BYD Qin Plus come with a charging pile?

BYD Qin Plus comes with a charging pile. Open the charging cover on the side of the vehicle, and you will see the charging plug inside. Here is some additional information: 1. Usage method: Plug the charging plug from the charging pile into the vehicle, and the dashboard will display the charging percentage and estimated charging time. If using the original charging cable provided, simply plug it into a power outlet to charge the vehicle. 2. Battery storage: The BYD Qin's battery can store 53.56KWH of electricity. A full charge allows the BYD Qin to run approximately 420 kilometers. It is recommended not to over-discharge the battery, as this can affect its lifespan. It's best to start charging when the remaining battery level is around 20%, as this will ensure good durability for the vehicle's battery.

5

3

Share

What Causes the Engine Fault Indicator to Flash?

Reasons for the engine fault indicator flashing: 1. Excessive carbon buildup in the throttle or engine interior; 2. Malfunction of the oxygen sensor leading to an imbalance in the air-fuel mixture ratio; 3. Leakage in the fuel injector, causing it to continue supplying fuel even after the throttle is closed, resulting in an overly rich mixture at low speeds and unstable idle after throttle release; 4. Substandard gasoline, where the use of low-quality fuel with excessive metal content poisons the oxygen sensor. A flashing engine fault light may indicate a malfunction in a certain component of the engine. The engine fault warning light is triggered by the ECU, which controls all the electronic components of the engine, such as the electronic throttle, fuel injector, alternator, and fuel pump. If any of these systems fail, the engine fault light will illuminate.

10

0

Share

What is the function of a car's cabin air filter?

What to Do When the Tiguan Hood Won't Close?

Is Infiniti a Joint Venture or Imported Vehicle?

How Often Should the Coolant in a Mercedes-Benz Be Replaced?

What are the reasons why BAIC vehicles fail to start?

Does BYD Qin Plus come with a charging pile?

What Causes the Engine Fault Indicator to Flash?

How to Test the Quality of a Two-Wire ABS Sensor?

What engine and transmission are used in the Weichai U70?

What to Do If the Car Chassis is Scraped and Leaking Engine Oil?

What are the interior maintenance items for a car?