What is the function of a bumper strip?

1 Answers
DeCooper
07/30/25 10:58am
The functions of a bumper strip include: adding lines and a sense of dynamism to the vehicle body, serving as a decorative element; and preventing scratches or impacts from external objects, providing protection. Since the bumper strip occupies a small proportion of the vehicle body, its protective effect is minimal when the side of the vehicle is impacted. The structural methods of attaching the bumper strip to the vehicle body are as follows: Embedded type: During the molding of the vehicle body, corresponding grooves are left, and the bumper strip is embedded into these grooves. Flat type: The vehicle body is made flat, with several holes left in the corresponding areas, and the corresponding posts of the bumper strip are inserted and adhered into these holes. Fixed type: The bumper strip and the vehicle body are fixed together using nuts and bolts.
Was this review help?
6
3
Share
More Forum Discussions

What are the reasons for the Mazda 3 Axela engine warning light to illuminate?

The engine warning light may illuminate during power-on self-test or under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC indicator light remains illuminated for an extended period after the vehicle is started, the possible causes include faults in the engine intake system, throttle failure, fuel system issues, engine malfunction, ECU control unit failure, or brake light problems. Below is a detailed explanation of each possible fault: Sensor Issues: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which may trigger the engine warning light. Solution: If such issues occur, promptly visit a repair center for professional inspection to eliminate potential safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance cycles. If maintenance is neglected and combined with poor driving habits, the engine's workload increases, eventually causing the warning light to illuminate. Solution: Follow the maintenance schedule in the vehicle's manual, including time or mileage intervals, to ensure comprehensive maintenance and rule out non-maintenance-related issues. Fuel Quality Issues: This refers to both fuel and engine oil. Vehicles require specific fuel grades, and engine oil can be semi-synthetic or fully synthetic. Manufacturers typically recommend the appropriate fuel grade and oil type. Failure to follow these recommendations may lead to engine wear and trigger the warning light. Solution: Use the recommended fuel grade and engine oil type for the vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, fuel pump issues, or clogged fuel lines can cause poor combustion of the air-fuel mixture, leading to engine carbon buildup or knocking. The oxygen sensor detects these issues and reports them to the ECU, triggering the warning light. Intake Issues: Engine combustion requires proper air intake, where the air filter plays a crucial role. A dirty or clogged air filter can restrict airflow, eventually leading to intake blockage and triggering the warning light. Solution: Regularly clean or replace the air filter to ensure proper intake system operation. Turbocharger Issues: Problems with the intake boost system or turbocharger can also cause the engine warning light to illuminate. Common issues include turbocharger failure, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Solution: Visit a 4S shop for inspection and replacement of the turbocharger. In most cases, repair is not cost-effective, and replacement is recommended. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, or exhaust camshaft and bearings can trigger the warning light. The most common issue is catalytic converter failure, often caused by physical damage or fuel system problems. Solution: Use lead- or silicon-based lubricants for catalytic converter maintenance and cleaning. Anti-Theft System Issues: If the vehicle's anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the engine may not operate properly, and the warning light may illuminate. Solution: Seek professional assistance at a repair shop, as this issue cannot be resolved individually. Engine Misfire: This occurs when one or more cylinders fail to operate properly, leading to symptoms such as power loss, difficulty starting, or unstable idling. Solution: Identify and replace faulty cylinder components. If internal mechanical damage is present, major repairs may be required.
2
1
Share

What size tires can be used on 18-inch wheels?

18-inch wheels have a rim width of 7.5 inches, suitable for 225mm wide tires, with a maximum width of 235mm. Here is some information about wheels: 1. The wheel hub is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. It is also called a rim, steel wheel, or wheel disc. Wheels come in various types based on diameter, width, manufacturing method, and materials. 2. For ordinary vehicle models, wheels are designed with less emphasis on appearance, but good heat dissipation is a basic requirement. The manufacturing process typically involves painting and baking, which is cost-effective and results in bright, long-lasting colors. Even when the vehicle is scrapped, the wheel's color remains unchanged.
9
0
Share

Will the car be stolen if someone finds the lost car key?

Normally, the key won't. Here are some relevant introductions about car keys: 1. Precautions: Do not place the key together with some hard objects, as this will scratch the chrome plating on the key. Place the key in a dry environment, as a humid environment will cause the battery life to decrease. Do not place the key near high-power electrical appliances such as televisions, microwaves, washing machines, or computers. 2. Maintenance methods: Do not expose the key to environments that are too cold (below 0°C) or too hot (above 50°C), otherwise it will cause a significant decrease in battery life.
2
5
Share

Is it normal for new car tires to have different production dates?

It is normal for new car tires to have different production dates. Here is some relevant information about tires: 1. Tire Introduction: Tires are the only components of a car that come into contact with the ground. Some car owners only replace the tires on the drive wheels when changing tires. For example, some front-wheel-drive car owners only replace the two front tires, while some rear-wheel-drive car owners only replace the two rear tires. In fact, this practice is acceptable. 2. Tire Aging: Tires are rubber products and will age over time. It is recommended that car owners replace their tires every four years, even if the mileage is low during that period. Since tires can also age when left unused for a long time, it is important to check the production date when purchasing tires.
13
4
Share

Can I call the police if my car is blocked and the owner refuses to move it?

You can call the police if your car is blocked and the owner refuses to move it. Below is some information about traffic violation handling: 1. Time frame: The owner must go to the local traffic police station to handle the violation within 15 days of receiving the penalty message. 2. Confirmation method: The fastest and most effective way to know if you have committed a violation is to inquire at the vehicle management office or traffic police station. You need to bring important documents such as your driver's license, vehicle license, and ID card. All three are indispensable, and it's best to prepare some cash so that if a violation record is found, you can immediately proceed with the relevant procedures.
16
4
Share

What does the number after the exam session mean?

The number indicates the frequency and location. Here is a relevant introduction about the driving test: 1. Definition of driving test simulation fee: The simulation fee and venue fee refer to the expenses required for conducting a simulated test at the examination site. During the process of obtaining a driver's license, apart from the registration fee, simulation fee, and venue fee, there are no other charges. However, the decision to take the simulated test or not is entirely up to the individual; one can choose to simulate or not. 2. Driving test: Applicants for a motor vehicle driver's license must pass the following four subjects: Subject one (laws, regulations, and related knowledge of road traffic safety), Subject two (site driving skills), Subject three (road driving skills), and Subject four (safe and civilized driving knowledge). The test sequence proceeds from Subject one to Subject four in order, and only after passing the previous subject can one proceed to the next.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.