What is the full score for Subject 2, and what is the passing score?

1 Answers
Gonzalez
07/30/25 8:29am
Subject 2 has a full score of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The following conditions must be met to pass the exam: ① For applicants of large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 is required; ② For other types of driving licenses, a score of 80 is required. The test items for small vehicles C1 and C2 include reversing into a garage, parallel parking, stopping and starting on a slope (canceled for C2), turning at a right angle, and driving on a curve (commonly known as the S-curve) as five mandatory items (some regions have a sixth item: high-speed card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curve, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. If you fail the Subject 2 exam on the first attempt, you can retake it once. If you do not take the retest or fail the retest, the exam process is terminated, and the applicant must reschedule the exam after ten days. Within the validity period of the driving skills test permit, the number of rescheduling for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth rescheduled exam is still failed, the results of other previously passed subjects will be invalidated.
Was this review help?
16
2
Share
More Forum Discussions

What Brand is the Hanteng Engine?

Hanteng's 1.5T engine is from SAIC General Motors, while the 2.0T engine is from Shenyang Aerospace Mitsubishi. Below is a detailed introduction to Hanteng engines: 1. Hanteng has planned multiple engines including 1.5L, 1.2T, 1.5T, 1.8T, and 2.0T. Among them, the 1.2T engine is a three-cylinder engine jointly developed with the German Mahle Group, featuring high and low power versions. The high-power version has parameters of 120kW and 286Nm, comparable to many current 2.0T engines. 2. Hanteng vehicles are equipped with SAIC's 1.5T engine paired with a 5-speed manual transmission, as well as the 2.0T engine from Shenyang Aerospace paired with a 5-speed manual and 6-speed dual-clutch transmission. These two engines have been adopted by numerous models, including the Roewe 350, Zotye T600, and Landwind X7.
4
4
Share

What type of oil should be used for Nissan Sylphy?

New Sylphy is most suitable for original factory engine oil. Below is an introduction to the method of selecting car engine oil: 1. Engine oil is divided into three types: mineral oil, semi-synthetic oil, and fully synthetic oil. Mineral oil should be changed every 5000 kilometers, semi-synthetic oil every 7500 kilometers, and fully synthetic oil every 10000 kilometers. 2. On the oil bottle, there are markings such as 5W30, 10W40, and 20W50. The number before W represents the low-temperature performance of the oil; the smaller the number, the better the low-temperature performance. The number after W represents the viscosity of the oil at high temperatures; the larger the number, the higher the viscosity.
16
3
Share

Does the Tiggo 3 have an automatic transmission?

Tiggo 3 has an automatic transmission. More detailed information about the Tiggo 3 automatic transmission is as follows: 1. The Tiggo 3 is the latest facelift of Chery's first SUV model, the Tiggo. It is a mid-to-low-end family SUV with spacious interior and certain off-road capabilities. It offers three engine options: 1.6L, 1.8L, and 2.0L. The 2.0L model is equipped with a four-speed automatic manual transmission. 2. The automatic luxury version of the automatic transmission model comes with features such as tire pressure monitoring, sunroof, navigation, faux leather seats, rear parking radar, rearview camera, cruise control, and automatic air conditioning. 3. From a cost-performance perspective, the Tiggo 3 is a highly cost-effective SUV model.
19
0
Share

Engine Model of BAIC Huansu S7?

EA211-DLF is the engine model used in the BAIC Huansu S7, with a maximum horsepower of 112 hp, a maximum power of 82 KW, a maximum power speed of 6100 rpm, and a peak torque of 145 N.m. The BAIC Huansu S7 is equipped with a 1.5T turbocharged engine, which is domestically produced by BAIC Huansu itself. For daily maintenance of the BAIC Huansu S7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
11
2
Share

How many types of engines are used in the BMW X5?

The BMW X5 uses two types of engines. The details of these two engines are as follows: 1. The 2.0-liter turbocharged engine delivers 265 horsepower and a maximum torque of 400 Nm. This engine can output maximum power at 5000 to 6000 rpm and maximum torque at 1550 to 4500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission. 2. The 3.0-liter turbocharged engine delivers 340 horsepower and a maximum torque of 450 Nm. This engine can output maximum power at 5500 to 6500 rpm and maximum torque at 1500 to 5200 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission.
20
2
Share

How Many Liters of Engine Oil Does the Eighth-Generation Camry Need?

The eighth-generation Camry generally requires about four liters of engine oil. When selecting engine oil, it should be chosen based on the engine's requirements. Do not use high-grade oil in a lower-grade engine, nor use low-grade oil in a high-grade engine. Always choose oil that matches the engine. Method for changing engine oil: Use a jack to lift the vehicle, locate and loosen the drain plug to drain the oil; unscrew the oil filter and place a container beneath it; replace with a new oil filter and add new engine oil. Functions of engine oil: Reduces friction and high temperatures; cools and lowers temperature; cleans and purifies; dampens vibrations; prevents rust and corrosion. Engine oil, also known as engine lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve any deficiencies in the base oil's performance. Meaning of oil grades: 'W' stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating it can be used in lower environmental temperatures and provides better engine protection during cold starts. The number after 'W' indicates the oil's high-temperature resistance; the higher the number, the better the oil's protective performance at high temperatures. Classification of engine oil: Conventional mineral oil, semi-synthetic oil, and full synthetic oil. Mineral oil is a commonly used lubricant on the market, derived from useful substances during petroleum refining. Semi-synthetic oil uses semi-synthetic base oil, which is a product of mineral oil purified through hydrocracking technology. Full synthetic oil is the highest-grade oil among engine oils.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.