···
Log in / Register

What is the full name of Subject Three?

3 Answers
SanDaniel
08/29/25 6:32am
Subject Three, also known as the Road Safety Driving Test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. More related information is as follows: 1. Content: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. The safe civilized driving knowledge test includes: safe civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
Was this review help?
20
3
Share
SadieDella
09/11/25 4:09am
As a novice who just passed the driving test, I know the full name of Subject 3 is the Road Driving Skills Test, which is definitely the most nerve-wracking part of the exam. The test content is really comprehensive, such as demonstrating gear shifting, hill starts, turning, and parking on real roads, with the examiner watching and scoring you throughout. During my preparation, I spent two to three hours daily practicing at the driving school, and I was most afraid of encountering pedestrians at intersections or heavy traffic, often making mistakes due to nervousness. Why is the Road Driving Skills Test so crucial? It assesses your driving ability and safety awareness in real-world conditions, and passing it proves you can drive independently. I recommend simulating real-life scenarios more, paying attention to details like mirror checks and speed control, as developing good habits increases your chances of passing. Remember, the test is not the end goal—safe driving is the long-term objective. Now, when driving on the road, I often remind myself to stay alert.
Was this review help?
18
3
Share
Expand All
LeahDella
10/25/25 4:58am
From years of personal driving experience, the Road Driving Skills Test (commonly known as Subject 3) is the most crucial part of the driver's license examination. This name directly reflects its essence: assessing practical skills on real roads. The test covers starting, lane changing, overtaking, intersection handling, and requires dealing with unexpected situations like avoiding obstacles or pedestrians. Many failures stem from nervousness or lack of proficiency, such as stalling during gear shifts or neglecting blind spot checks. I believe preparation should focus on practical exercises, seeking opportunities to drive on complex road sections to develop reaction speed and anticipation skills. The Road Driving Skills Test isn't designed to be difficult, but to ensure every driver can take responsibility for safety and reduce accident risks. During training, recording driving videos to analyze mistakes and reinforcing safety awareness will naturally lead to test success. Only after obtaining my license did I truly appreciate the value of this examination.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is the reason why the rearview mirror of the Audi A6 does not automatically fold?

The reason why the rearview mirror of the Audi A6 does not automatically fold is: a short circuit in the rearview mirror wiring. The solution is to turn off the car and restart it, then press the automatic folding button for the rearview mirror on the car door handle, and the car's rearview mirror will automatically fold. If it cannot be restored, it needs to be inspected and repaired at a 4S shop. Taking the Audi A6 (imported) 2021 Avant Pioneer 40TFSI Luxury Dynamic model as an example: it is a mid-to-large-sized car launched by Audi (imported), with a length, width, and height of 4951mm, 1886mm, and 1483mm respectively, and a wheelbase of 2925mm. It is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission.
18
5
Share

What is the optimal oil level on the dipstick for a motorcycle?

The optimal oil level on the dipstick for a motorcycle: approximately three-quarters between the upper and lower marks on the dipstick, meaning slightly towards the upper limit within the dipstick's range. Steps to check the oil level: 1. Place the vehicle on a flat surface, turn off the engine, and let it sit for 15 minutes; 2. Remove the dipstick, wipe it clean, and reinsert it, ensuring it reaches the bottom of the oil pan; 3. Remove the dipstick again to check the oil level. If the oil level is within the upper and lower marks on the dipstick, it is normal. A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine and steered by handlebars controlling the front wheel. It is lightweight, flexible, fast, and widely used for patrolling, passenger and cargo transport, as well as a sports equipment.
7
1
Share

What Does the Low Fuel Level Warning Light Indicate?

When the low fuel level warning light illuminates, it indicates that the fuel is nearly depleted. Generally, from the moment the light comes on until the fuel is completely exhausted, the vehicle can typically travel at least 20 kilometers without any issues, and some vehicles may even cover around 50 kilometers. Alternatively, the issue might be with the fuel level sensor (fuel float), which should be inspected. Below is an introduction to gasoline octane ratings and their corresponding engine compression ratios: 1. 90-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio below 8.5. 2. 92-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9. 3. 95-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 10.0 and 11.5. 4. 98-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio above 11.6.
9
3
Share

How to reset the maintenance light on the Leiling 1.2T?

Method to reset the maintenance light on the Leiling 1.2T: 1. Turn the ignition switch to the ON position; 2. Press and hold the maintenance light reset button, then rotate until the trip meter A appears; 3. Turn off the ignition switch; 4. Press and hold the maintenance light reset button while rotating, then turn the ignition switch to the ON position again; 5. Turn off the ignition switch, press and hold the maintenance light reset button and rotate until the mileage is reset. After 5 seconds, trip meter A will display "000000", indicating the maintenance light has been successfully reset. Taking the 2021 CVT Luxury Edition Leiling as an example: The manufacturer of this vehicle is GAC Toyota, with a body length, width, and height of 4640mm, 1780mm, and 1455mm respectively, a wheelbase of 2700mm, equipped with a 1.2T turbocharged engine, and matched with a CVT continuously variable transmission.
8
1
Share

What are the dimensions of the Mistra?

Modern Mistra model dimensions are 4710*1820*1470mm. Related introduction: 1. Introduction: Mistra is a Beijing Hyundai new mid-to-high-end sedan, MISTRA Mistra is positioned at the B level, between the Elantra and the Sonata, is another fine work that Beijing Hyundai aims at the gap in the segmented market and launches in the B-level mid-to-high-end sedan market, and is also another model specifically developed for the Chinese market. 2. Appearance: In terms of appearance, the Mistra continues to further deepen the fluidic sculpture design language, especially adopting a wide grille horizontal bar design similar to the Santa Fe, and will be equipped with lenses, with frosted silver and chrome line decorations inside the lights.
2
4
Share

Will the suspension be damaged if the rear wheel falls into a pit?

If the rear wheel falls into a pit, the suspension will not be damaged. The reasons are as follows: 1. Structural reasons: In modern cars, it is often only used for the rear wheels. In this type of suspension, the wheels are controlled by an independent linkage mechanism, allowing them to move individually according to road conditions without affecting the entire vehicle body. 2. Suspension introduction: Suspensions can be divided into two basic types based on structure: dependent suspension and independent suspension. Dependent suspension is used in conjunction with a solid axle and is mainly employed in commercial vehicles (trucks) or the rear suspension of off-road vehicles. In this type of suspension, the left and right wheels are not independent of each other. When one wheel moves relative to the frame or body due to uneven road conditions, the other wheel undergoes the same change.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.